Dbx Zonepro 640 Digital Zone Processor

December 25th, 2012 by admin Leave a reply »

Dbx Zonepro 640 Speaker Processor


Dbx Zonepro 640 Speaker Processor


$599


With 6 inputs and 4 outputs the dbx ZonePRO 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.Designed to offer superior system sonic performance and flexibility, the 640/641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.Beyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoringAdvanced Feedback Suppression (AFS)AutowarmthAuto Gain ControlCompressionLimitingNoise GatingNotch FilteringBandpass and Crossover FiltersParametric EQSecurity LockoutWall Panel ControlRS-232 ControlWindows 2000 and XP GUIIEC, UL and CSA Approvals

dbx ZonePRO 640 Speaker Processor  888365966595


dbx ZonePRO 640 Speaker Processor 888365966595


$439.96


With 6 inputs and 4 outputs the dbx ZonePRO 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.Designed to offer superior system sonic performance and flexibility, the 640641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.Beyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoring the ZonePRO Designer software provides an intuitive interface and a speedy setup Wizard for configuring and editing all system parameters.The ZonePRO 640 will take your Commercial Audio system to the next level with advanced processing, versatility and control.Advanced Feedback Suppression AFSAutowarmthAuto Gain ControlCompressionLimitingNoise GatingNotch FilteringBandpass and Crossover FiltersParametric EQSecurity LockoutWall Panel ControlRS-232 ControlWindows 2000 and XP GUIIEC, UL and CSA Approvals

Dbx Zonepro 1261M Speaker Processor


Dbx Zonepro 1261M Speaker Processor


$749.95


The ZonePRO products have long been the obvious choice for managing commercial audio applications. They're easy to install and use – thanks to step-by-step setup wizards – and they're backed by long track record of dbx reliability. The fact that so many are in use in locations worldwide speaks to their popularity and dependable performance.<BR/><BR/>The ZonePRO 1261m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.<BR/><BR/>The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled<BR/>microphone gain allows adjustment of microphone gain per channel.<BR/><BR/>The 1261m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.<BR/><BR/>A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.<BR/><BR/>The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port.<BR/><BR/>Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.<BR/><BR/>All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).<BR/><BR/>ZonePRO Designer-the configuration, control and monito<ul><li>2 Inputs / 6 Outputs</li><li>6 Balanced Mic/Line Inputs</li><li>4 Unbalanced, Mono-Summed RCA Input Pairs</li><li>S/PDIF Input</li><li>Microphone Gain per Channel</li><li>Pre-Configured Architecture</li><li>Two Configurable Input Insert Positions</li><li>One Configurable Output Insert Position</li><li>AutoWarmth per Output Zone</li><li>Link Bus</li><li>Optional ZC Controllers</li><li>Ethernet Control</li><li>Serial Control</li><li>Third Party Control</li><li>Wizard-Driven Configuration</li></ul>

dbx ZonePRO 1260m Speaker Processor


dbx ZonePRO 1260m Speaker Processor


$747.96


The ZonePRO 1260m offers fixed IO, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced micline switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one SPDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable see table for further information.ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.12 Inputs 6 Outputs6 Balanced MicLine Inputs4 Unbalanced, Mono-Summed RCA Input PairsSPDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusComprehensive Signal MeteringFront Panel LCD9 User-Specified Front Panel ControlOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Zonepro 1260M Speaker Processor


Dbx Zonepro 1260M Speaker Processor


$929


The ZonePRO 1260m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.12 Inputs / 6 Outputs6 Balanced Mic/Line Inputs4 Unbalanced, Mono-Summed RCA Input PairsS/PDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusComprehensive Signal MeteringFront Panel LCD9 User-Specified Front Panel ControlOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

DBX ZonePro 1261m 12x6 Digital Zone Processor - Black


DBX ZonePro 1261m 12×6 Digital Zone Processor – Black


$819


12×6 Digital Zone Processor

dbx ZonePRO 641 m Speaker Processor


dbx ZonePRO 641 m Speaker Processor


$439.96


The ZonePRO 641m offers fixed IO, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 641m features a total of six inputs and four outputs. Inputs include four balanced micline switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable see table for further information. ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.6 Inputs 4 Outputs4 Balanced MicLine Inputs2 Unbalanced, Mono-Summed RCA Input PairsMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Zonepro 641 M Speaker Processor


Dbx Zonepro 641 M Speaker Processor


$499.95


The ZonePRO 641m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 641m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information). ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.6 Inputs / 4 Outputs4 Balanced Mic/Line Inputs2 Unbalanced, Mono-Summed RCA Input PairsMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Zc-4 Wall Mount Zone Control


Dbx Zc-4 Wall Mount Zone Control


$54.99


The Zone Controllers, like this ZC-4, offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1,000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for ZonePRO devices.

dbx ZC-4 Wall Mount Zone Control


dbx ZC-4 Wall Mount Zone Control


$99.95


The Zone Controllers, like this ZC-4, offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1,000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260 it can also provide source selection, page steering, or scene selection for ZonePRO devices.

Dbx 560A 500 Series Compressor / Limiter


Dbx 560A 500 Series Compressor / Limiter


$199.95


The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to the 900 Series and the 560A continues that tradition.Featuring the same switch-selectable OverEasy and Hard Knee compression curves as the industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! Its also versatile enough to go from subtle compression to “brick wall” peak limiting.Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560A’s Hard Knee compression and high ratios for bombproof protection against overload distortion in digital recording, P.A. systems and broadcast signals.The 560A’s 19-segment, switchable Input/Output LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the dbx 560A’s unique “INFINITY +” inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway mix levels.OverEasy or classic hard knee compression with dbx’ ultra-musical program dependent attack and release timesCompression ratio variable from 1:1 through infinity:1 to -1:1Precise RMS gain reduction and input/output meter displays with calibration control for different operating levelsTrue RMS level detectionExclusive Infinity+ compression using negative ratios

dbx 560A 500 Series Compressor / Limiter


dbx 560A 500 Series Compressor / Limiter


$199.95


The dbx 560A CompressorLimiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to the 900 Series and the 560A continues that tradition.Featuring the same switch-selectable OverEasy and Hard Knee compression curves as the industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything Its also versatile enough to go from subtle compression to brick wall peak limiting.Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560As Hard Knee compression and high ratios for bombproof protection against overload distortion in digital recording, P.A. systems and broadcast signals.The 560As 19-segment, switchable InputOutput LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the dbx 560As unique INFINITY inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway mix levels.OverEasy or classic hard knee compression with dbx ultra-musical program dependent attack and release timesCompression ratio variable from 11 through infinity1 to -11Precise RMS gain reduction and inputoutput meter displays with calibration control for different operating levelsTrue RMS level detectionExclusive Infinity compression using negative ratios

dbx goRack Performance Processor


dbx goRack Performance Processor


$29


A small and inexpensive speaker processor that will result in unprecedented performance from your existing powered speaker system. Based on dbxs DriveRack Series, the goRack provides Anti-Feedback, Compression, Sub-Harmonic Synth and EQ. Each processing function is enabled or disabled via top-level function buttons, and settings can be adjusted via goRack large data wheel.goRack rear panel features combination 14XLR inputs that can be connected to mixer outputs or to microphones directly. When using a mic, the goRacks MicLine switch selects the proper input sensitivity and gain range while dual gain controls on the top provide independent level adjustment. goRack 18 Aux input allows for direct connection of mobile music players while XLR outputs interface with powered speakers. The goRack is perfect for applications from a mixer, or with its dual XLR inputs and Aux input, it can be used as a standalone performance processormixer for the solo artist.Feedback supressionMake annoying and potentially painful audio feedback a thing of the past with the goRacks simple-to-use, Anti-Feedback processing. Based on dbxs industry-leading AFS Advanced Feedback Suppression algorithm, the goRack makes eliminating system feedback a snap. Simply press the goRacks Anti-Feedback function button and use the Data Wheel to adjust the settings. The goRack listens for, anticipates and removes feedback automatically without altering your sound.CompressionControl dynamics and fine-tune your system with the straightforward Compressor feature based on the legendary dbx 163 Compressor. Minimize peaks and level out variances in your audio source material with goRack intuitive Compressor feature.Sub-harmonic synthgoRacks Sub Synth feature is the perfect tool for adding extra bass to your system. For decades, dbxs patented Subharmonic Synthesis has been the secret weapon usCompact Form FactorAnti-Feedback Processing based on the dbx AFS Advanced Feedback Suppression algorithmdbx Compression based on the dbx 163Subharmonic SynthesisEQ 20 Musical Genre-Based 31-Band Graphic EQ SettingsDual dbx Microphone PreampLine InputsSelectable MicLine Input SettingsStereo Inputs and OutputsCombination MicLine Input Jacks and XLR Outputs18quot Stereo Aux Input for Mobile Music PlayersDevicesIndependent Left and Right Channel Volume Controls

Dbx Driverack 220I Signal Processor


Dbx Driverack 220I Signal Processor


$149.99


Save BIG when you buy today!

DBX 286s Microphone Pre-amp Processor - White


DBX 286s Microphone Pre-amp Processor – White


$219


Microphone Pre-amp Processor

Dbx Driverack Eq Combo W Power Supply Signal Processor


Dbx Driverack Eq Combo W Power Supply Signal Processor


$924.99


DRIVERACK 481 EQ & LOUDSPEAKER W/480 P REMOTE POWER SYSTEM.

Dbx Dbxzc3v Wall Mount Zone Control


Dbx Dbxzc3v Wall Mount Zone Control


$69


Save BIG when you buy today!

Dbx Dbxzc6v Wall Mount Zone Control


Dbx Dbxzc6v Wall Mount Zone Control


$54


Save BIG when you buy today!

dbx DBXZC3V Wall Mount Zone Control


dbx DBXZC3V Wall Mount Zone Control


$69


Save BIG when you buy today

Dbx Dbxzc1v Wall Mount Zone Control


Dbx Dbxzc1v Wall Mount Zone Control


$49


Save BIG when you buy today!

Dbx Dbxbob Wall Mount Zone Control&*


Dbx Dbxbob Wall Mount Zone Control&*


$79


Save BIG when you buy today!

Dbx Dbxzc8v Wall Mount Zone Volume Control


Dbx Dbxzc8v Wall Mount Zone Volume Control


$69


Save BIG when you buy today!

dbx DBXZC6V Wall Mount Zone Control


dbx DBXZC6V Wall Mount Zone Control


$54


Save BIG when you buy today

dbx DBXZC9V Wall Mount Zone Volume Control&*


dbx DBXZC9V Wall Mount Zone Volume Control&*


$62.79


Save BIG when you buy today

Dbx Dbxzc9v Wall Mount Zone Volume Control&*


Dbx Dbxzc9v Wall Mount Zone Volume Control&*


$69


Save BIG when you buy today!
Advertisement

Comments are closed.