DBX Zone Pro 641

June 20th, 2010 by admin Leave a reply »

dbx ZonePRO 641 m Speaker Processor


dbx ZonePRO 641 m Speaker Processor


$439.96


The ZonePRO 641m offers fixed IO, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 641m features a total of six inputs and four outputs. Inputs include four balanced micline switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable see table for further information. ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.6 Inputs 4 Outputs4 Balanced MicLine Inputs2 Unbalanced, Mono-Summed RCA Input PairsMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Zonepro 641 M Speaker Processor


Dbx Zonepro 641 M Speaker Processor


$499.95


The ZonePRO 641m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 641m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information). ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.6 Inputs / 4 Outputs4 Balanced Mic/Line Inputs2 Unbalanced, Mono-Summed RCA Input PairsMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Zonepro 640 Speaker Processor


Dbx Zonepro 640 Speaker Processor


$599


With 6 inputs and 4 outputs the dbx ZonePRO 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.Designed to offer superior system sonic performance and flexibility, the 640/641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.Beyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoringAdvanced Feedback Suppression (AFS)AutowarmthAuto Gain ControlCompressionLimitingNoise GatingNotch FilteringBandpass and Crossover FiltersParametric EQSecurity LockoutWall Panel ControlRS-232 ControlWindows 2000 and XP GUIIEC, UL and CSA Approvals

dbx ZonePRO 640 Speaker Processor


dbx ZonePRO 640 Speaker Processor


$599


With 6 inputs and 4 outputs the dbx ZonePRO 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.Designed to offer superior system sonic performance and flexibility, the 640641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.Beyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoringAdvanced Feedback Suppression AFSAutowarmthAuto Gain ControlCompressionLimitingNoise GatingNotch FilteringBandpass and Crossover FiltersParametric EQSecurity LockoutWall Panel ControlRS-232 ControlWindows 2000 and XP GUIIEC, UL and CSA Approvals

dbx ZonePRO 640 Speaker Processor  888365966595


dbx ZonePRO 640 Speaker Processor 888365966595


$439.96


With 6 inputs and 4 outputs the dbx ZonePRO 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.Designed to offer superior system sonic performance and flexibility, the 640641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.Beyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoring the ZonePRO Designer software provides an intuitive interface and a speedy setup Wizard for configuring and editing all system parameters.The ZonePRO 640 will take your Commercial Audio system to the next level with advanced processing, versatility and control.Advanced Feedback Suppression AFSAutowarmthAuto Gain ControlCompressionLimitingNoise GatingNotch FilteringBandpass and Crossover FiltersParametric EQSecurity LockoutWall Panel ControlRS-232 ControlWindows 2000 and XP GUIIEC, UL and CSA Approvals

dbx DBXBOB Wall Mount Zone Control&*


dbx DBXBOB Wall Mount Zone Control&*


$79


Save BIG when you buy today

Dbx Zc-4 Wall Mount Zone Control


Dbx Zc-4 Wall Mount Zone Control


$99.95


The Zone Controllers, like this ZC-4, offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1,000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.<br><br>The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for ZonePRO devices.<br>

Dbx Dbxzc9v Wall Mount Zone Volume Control&*


Dbx Dbxzc9v Wall Mount Zone Volume Control&*


$69


Save BIG when you buy today!

Dbx Dbxzc3v Wall Mount Zone Control


Dbx Dbxzc3v Wall Mount Zone Control


$69


Save BIG when you buy today!

Dbx Dbxbob Wall Mount Zone Control&*


Dbx Dbxbob Wall Mount Zone Control&*


$79


Save BIG when you buy today!

Dbx Dbxzc8v Wall Mount Zone Volume Control


Dbx Dbxzc8v Wall Mount Zone Volume Control


$69


Save BIG when you buy today!

Dbx Dbxzc6v Wall Mount Zone Control


Dbx Dbxzc6v Wall Mount Zone Control


$54


Save BIG when you buy today!

dbx DBXZC6V Wall Mount Zone Control


dbx DBXZC6V Wall Mount Zone Control


$49.14


Save BIG when you buy today

Dbx Dbxzc1v Wall Mount Zone Control


Dbx Dbxzc1v Wall Mount Zone Control


$59


Save BIG when you buy today!

dbx DBXZC1V Wall Mount Zone Control


dbx DBXZC1V Wall Mount Zone Control


$50


Save BIG when you buy today

dbx DBXZC9V Wall Mount Zone Volume Control&*


dbx DBXZC9V Wall Mount Zone Volume Control&*


$69


Save BIG when you buy today

dbx ZC-4 Wall Mount Zone Control


dbx ZC-4 Wall Mount Zone Control


$99.95


The Zone Controllers, like this ZC-4, offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1,000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260 it can also provide source selection, page steering, or scene selection for ZonePRO devices.

dbx DBXZC4V Wall Mount Zone Control


dbx DBXZC4V Wall Mount Zone Control


$90.95


Save BIG when you buy today

dbx DBXZC8V Wall Mount Zone Volume Control


dbx DBXZC8V Wall Mount Zone Volume Control


$69


Save BIG when you buy today
Advertisement

Comments are closed.