Dbx Rta Microphone

September 26th, 2009 by admin Leave a reply »

Dbx Rta-M Dynamic Microphone


Dbx Rta-M Dynamic Microphone


$49.99


Save BIG when you buy today!

dbx RTA-M Reference Microphone for DriveRack PA


dbx RTA-M Reference Microphone for DriveRack PA


$99.95


Omni-directional, flat frequency, measurement mic. Requires phantom power.

Dbx Rta-M Reference Microphone For Driverack Pa


Dbx Rta-M Reference Microphone For Driverack Pa


$99.95


Omni-directional, flat frequency, measurement mic. <BR/>Requires phantom power.

Dbx Drive Rack 260 With Rta-M Reference Mic


Dbx Drive Rack 260 With Rta-M Reference Mic


$1099.94


The DriveRack 260 with RTA-M Reference Microphone includes the DriveRack 260 Complete Equalization and Loudspeaker Management System and the DBX RTA-M Reference Microphone. The 260 DriveRack essentially becomes the only device that you will need between the mixer and the power amps. DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application.DriveRack 260 DriveRack 260 Complete Equalization and Loudspeaker Management SystemThe DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI software control provides easy PC-based control.RTA-M Reference MicrophoneThe DBX RTA-M Reference Microphone is omnidirectional, and has a flat frequency response, making it ideal an a measurement microphone. The RTA-M was designed to work with the DBX DriveRack Loudspeaker Management Systems for feedback elimination in venues and studios.Feedback elimination2.7 seconds of alignment and zone delayRS-232 PC GUI Software Interface controlClassic dbx compression and limitingGraphic and parametric EQsAuto-EQ functionFull bandpass, crossover, and routing configurationsAuto gain controlPink noise generator and fulltime RTASetup wizard with JBL speaker and Crown power amplifier tuningsSecurity lockoutWall panel control inputs for permanent installations

Dbx 786 Microphone Preamp


Dbx 786 Microphone Preamp


$1199.99


Save BIG when you buy today!

DBX 286s Microphone Pre-amp Processor - White


DBX 286s Microphone Pre-amp Processor – White


$219


Microphone Pre-amp Processor

dbx DriveRack PX Powered Speaker Optimizer


dbx DriveRack PX Powered Speaker Optimizer


$131.99


Powered speakers are beautiful things. Everything you need bundled into simple, tidy, portable packages. Just grab em and go, right Well, you may think your powered speaker system is complete, but youre missing half the picture. DriveRack PX is the other half. With the PX, dbx has created a processor specifically tailored for powered speakers. Utilizing dbxs highly acclaimed DriveRack technology, the PX picks up where your powered speakers leave off. The DriveRack PX Powered Speaker Optimizer has everything you need to get the most out of your stereo powered speaker system. It even includes stereo or mono subwoofer support. With the included dbx M2 measurement mic, Auto-EQ corrects for audible deficiencies in the room environment. Dbxs patented Advanced Feedback Suppression AFSTM kills nasty feedback, allowing problem-free operation at higher sound levels, while dbxs patented Subharmonic Synthesizer extends bass response for enhanced bottom end. With all that, you also get classic dbx compression and the protection offered by dbxs graceful PeakStopPlus limiting. Your ears, your audience, and your powered speakers will forever thank you. In spite of all that sophistication, rest assured dbx wont overcomplicate the simplicity of your rig. Dbxs exclusive Setup, Auto-EQ, AFS Wizards, and out-of-the-box support for a host of JBL and other popular powered speakers, make setup a snap. Louder, cleaner, better sound than you thought possible from your powered speakers.Stereo feedback elimination with 12 feedback notch filters Dual 28-band graphic EQ Classic dbx Compressor 120A subharmonic synthesizer Stereo multi-band parametric EQ Stereo PeakStopPlus limiters Pink noise generator Auto-EQ with 28-band RTA JBL and other popular powered speakers included in Setup Wizard dbx M2 measurement mic and zippered pouch included Front panel RTA-Mic XLR inputwith phantom power 25 user programs 25 factory programs 2-channel XLR Input 2-channel XLR Output 2-channel XLR Sub Output 24-bit ADC24-bit DAC, >110 dB dynamic range dbx Type IVTM conversion system Full graphic LCD display

Dbx 220I 2X2 Loudspeaker Management System With Display


Dbx 220I 2X2 Loudspeaker Management System With Display


$629.95


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 220i provides both system and microphone processing thanks to its full set of processing features and mic/line inputs. Click on the “View additional manufacturer information” link below to get the full scoop!Advanced feedback suppression (AFS) Graphic and parametric EQ Compressor Limiter Auto gain control Noise gating De-esser Ducker Bandpass filters 2×2 matrix mixer 1.3 seconds of delay RS-232 PC GUI control Mic/line inputs Wall panel control Security lockout

Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System


Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System


$454.99


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Black


Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Black


$639


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

dbx DriveRack 260 Complete Equalization and Loudspeaker Control System


dbx DriveRack 260 Complete Equalization and Loudspeaker Control System


$562.32


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters to provide protection against speaker blowouts, and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Regular 190839685971


Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Regular 190839685971


$511.2


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

dbx DriveRack 260 Complete Equalization and Loudspeaker Control System Regular 1


dbx DriveRack 260 Complete Equalization and Loudspeaker Control System Regular 1


$511.2


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters to provide protection against speaker blowouts, and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Dbx Driverack Pa2


Dbx Driverack Pa2


$439


The dbx Driverack is one of the most innovative and helpful tools to come along for the live sound engineer in decades. It incorporates crossover, EQ, compression, delay parameters and much more within individual presets. These presets can then be applied to specific rooms, expected environments and applications. The dbx Driverack PA2 incorporates heavily researched and well-considered improvements in the original Driverack system.The DriveRack PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ and AFS algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android, iOS, Mac, or Windows device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.AutoEQNew, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.With the RTA Mic “listening” to your room, the new, updated DriveRack PA2 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.Enhanced AFS Feedback EliminationEnhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system’s tone.Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before it even has a chance, while never altering your sound.

dbx DriveRack PA2


dbx DriveRack PA2


$439


The dbx Driverack is one of the most innovative and helpful tools to come along for the live sound engineer in decades. It incorporates crossover, EQ, compression, delay parameters and much more within individual presets. These presets can then be applied to specific rooms, expected environments and applications. The dbx Driverack PA2 incorporates heavily researched and well-considered improvements in the original Driverack system.The DriveRack PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbxs proprietary AutoEQ and AFS algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android, iOS, Mac, or Windows device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.AutoEQNew, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.With the RTA Mic listening to your room, the new, updated DriveRack PA2 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.Enhanced AFS Feedback EliminationEnhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your systems tone.Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before it even has a chance, while never altering your sound.

Dbx Zonepro 1261M Speaker Processor


Dbx Zonepro 1261M Speaker Processor


$749.95


The ZonePRO products have long been the obvious choice for managing commercial audio applications. They're easy to install and use – thanks to step-by-step setup wizards – and they're backed by long track record of dbx reliability. The fact that so many are in use in locations worldwide speaks to their popularity and dependable performance.<BR/><BR/>The ZonePRO 1261m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.<BR/><BR/>The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled<BR/>microphone gain allows adjustment of microphone gain per channel.<BR/><BR/>The 1261m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.<BR/><BR/>A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.<BR/><BR/>The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port.<BR/><BR/>Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.<BR/><BR/>All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).<BR/><BR/>ZonePRO Designer-the configuration, control and monito2 Inputs / 6 Outputs<BR/>6 Balanced Mic/Line Inputs<BR/>4 Unbalanced, Mono-Summed RCA Input Pairs<BR/>S/PDIF Input<BR/>Microphone Gain per Channel<BR/>Pre-Configured Architecture<BR/>Two Configurable Input Insert Positions<BR/>One Configurable Output Insert Position<BR/>AutoWarmth per Output Zone<BR/>Link Bus<BR/>Optional ZC Controllers<BR/>Ethernet Control<BR/>Serial Control<BR/>Third Party Control<BR/>Wizard-Driven Configuration<BR/>

Dbx Di1 Active Direct Box


Dbx Di1 Active Direct Box


$109


The dbx DI1 is a compact, high-quality active direct injection box. Ideal for both studios and on the road, the DI1 will ensure audio signals reach their intended destination in both a balanced format and free from unwanted noise.Connect the output from electric guitars, bass amplifiers, keyboards, etc, directly to a console mixer without the use of a microphone. Built for toughness and reliability, the DI1 has all the features of a fully featured gig-ready workhorse DI unit.Level and impedance matching functionOutput impedance: > 600 OhmsSignal pass through connectorOutput connector: XLR balancedBattery LED indicatorDistortion: (THD) < 0.005% at 1kHz, 0dBuPhantom power led indicatorMax Input: +12dBu (at 0dB) Level +32dBu (at -20dB) +52dBu (at -40dB)Output Noise: <-100dB unweightedTS and XLR inputs and outputsFrequency response: 10Hz to 70kHz, +0dB/-3dBAttenuation controlPhantom Power: +18 volts DC to +48 volts DCGround lift switchMain/Standby: 9V batteryInput Impedance: >250k OhmMetal Chassis

dbx ZonePRO 641 m Speaker Processor


dbx ZonePRO 641 m Speaker Processor


$439.96


The ZonePRO 641m offers fixed IO, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 641m features a total of six inputs and four outputs. Inputs include four balanced micline switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable see table for further information. ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.6 Inputs 4 Outputs4 Balanced MicLine Inputs2 Unbalanced, Mono-Summed RCA Input PairsMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Used Dbx Zonepro 1260M Speaker Processor


Used Dbx Zonepro 1260M Speaker Processor


$747.96


The ZonePRO 1260m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.12 Inputs / 6 Outputs6 Balanced Mic/Line Inputs4 Unbalanced, Mono-Summed RCA Input PairsS/PDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusComprehensive Signal MeteringFront Panel LCD9 User-Specified Front Panel ControlOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Zonepro 641 M Speaker Processor


Dbx Zonepro 641 M Speaker Processor


$499.95


The ZonePRO 641m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 641m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information). ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.6 Inputs / 4 Outputs4 Balanced Mic/Line Inputs2 Unbalanced, Mono-Summed RCA Input PairsMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Zonepro 1260M Speaker Processor


Dbx Zonepro 1260M Speaker Processor


$849.95


The ZonePRO 1260m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.12 Inputs / 6 Outputs6 Balanced Mic/Line Inputs4 Unbalanced, Mono-Summed RCA Input PairsS/PDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusComprehensive Signal MeteringFront Panel LCD9 User-Specified Front Panel ControlOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

dbx ZonePRO 1260m Speaker Processor


dbx ZonePRO 1260m Speaker Processor


$747.96


The ZonePRO 1260m offers fixed IO, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced micline switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one SPDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable see table for further information.ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.12 Inputs 6 Outputs6 Balanced MicLine Inputs4 Unbalanced, Mono-Summed RCA Input PairsSPDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusComprehensive Signal MeteringFront Panel LCD9 User-Specified Front Panel ControlOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Driverack Venu360 Speaker Management System


Dbx Driverack Venu360 Speaker Management System


$869


The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’ proprietary AutoEQ and AFS algorithms, additional input channels, ethernet control via an Android, iOS, Mac, or Windows device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.AutoEQNew, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.With a RTA Mic listening to your room, the updated DriveRack VENU360 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds using sine sweeps. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.The AutoEQ is now located in the output processing stage, which means independent sections of a system can be equalized automatically. This allows AutoEQ to be used on the FOH system as well as the stage monitors, zones and tower delays!Enhanced AFS Feedback Elimination Enhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system’ tone.Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack VENU360 listens for and anticipates feedback and automatically removes it before it even has a chance, while never altering your sound.Updated Wizard Setup FunctionsUpdated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date.Wizard functions in the DriveRack VENU360 guide you throughInput Processingdbx CompressionAFS (Advanced Feedback Suppression)31-Band Graphic EQ12-Band Parametric EQ (with narrow notch capabilities)Subharmonic SynthesisBackline DelayNoise GateOutput ProcessingCrossover (supports full range up to mono 6-way systems)12-Band AutoEQs (8 AutoEQ bands, 4 User bands)dbx CompressionAutomatic Gain ControlSubharmonic SynthesisNoise GateTower Delays (up to 1000ms per output)8-Band Parametric EQs (used for speaker tunings)dbx LimitingDriver Alignment DelaysTested Wireless RoutersDlink 636LDlink Cloud router 2000Cisco / linksys: WRT54G2V1Netgear WGR614 v7Netgear WNR 1000

dbx DriveRack VENU360 Speaker Management System  190839001689


dbx DriveRack VENU360 Speaker Management System 190839001689


$639.2


The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx proprietary AutoEQ and AFS algorithms, additional input channels, ethernet control via an Android, iOS, Mac, or Windows device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.AutoEQNew, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.With a RTA Mic listening to your room, the updated DriveRack VENU360 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds using sine sweeps. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.The AutoEQ is now located in the output processing stage, which means independent sections of a system can be equalized automatically. This allows AutoEQ to be used on the FOH system as well as the stage monitors, zones and tower delaysEnhanced AFS Feedback Elimination Enhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system tone.Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack VENU360 listens for and anticipates feedback and automatically removes it before it even has a chance, while never altering your sound.Updated Wizard Setup FunctionsUpdated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date.Wizard functions in the DriveRack VENU360 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system. The Wizards help you configure routing, level balancing, AutoEQ, Advanced Feedback Suppression, and provide access to updated speaker tunings available for most major speaker brands. The addition of a Monitor Wizard makes it easy to configure and optimize stage monitors.Mobile ControlConnect to the DriveRack VENU360 through your local network with your Android, iOS, Mac, or Windows device to customize the sound of your loudspeaker system so it sounds and performs optimally. The app lets you directly manipulate the Compressor, Graphic EQ, Parametric EQ, Crossover settings, Speaker profiles, and more with its attractive, easy-to-use graphical user interface.Input Processingdbx CompressionAFS Advanced Feedback Suppression31-Band Graphic EQ12-Band Parametric EQ with narrow notch capabilitiesSubharmonic SynthesisBackline DelayNoise GateOutput

dbx DriveRack VENU360 Speaker Management System


dbx DriveRack VENU360 Speaker Management System


$703.12


The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx proprietary AutoEQ and AFS algorithms, additional input channels, ethernet control via an Android, iOS, Mac, or Windows device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.AutoEQNew, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.With a RTA Mic listening to your room, the updated DriveRack VENU360 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds using sine sweeps. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.The AutoEQ is now located in the output processing stage, which means independent sections of a system can be equalized automatically. This allows AutoEQ to be used on the FOH system as well as the stage monitors, zones and tower delaysEnhanced AFS Feedback Elimination Enhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system tone.Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack VENU360 listens for and anticipates feedback and automatically removes it before it even has a chance, while never altering your sound.Updated Wizard Setup FunctionsUpdated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date.Wizard functions in the DriveRack VENU360 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system. The Wizards help you configure routing, level balancing, AutoEQ, Advanced Feedback Suppression, and provide access to updated speaker tunings available for most major speaker brands. The addition of a Monitor Wizard makes it easy to configure and optimize stage monitors.Mobile ControlConnect to the DriveRack VENU360 through your local network with your Android, iOS, Mac, or Windows device to customize the sound of your loudspeaker system so it sounds and performs optimally. The app lets you directly manipulate the Compressor, Graphic EQ, Parametric EQ, Crossover settings, Speaker profiles, and more with its attractive, easy-to-use graphical user interface.Input Processingdbx CompressionAFS Advanced Feedback Suppression31-Band Graphic EQ12-Band Parametric EQ with narrow notch capabilitiesSubharmonic Synth
Advertisement

Comments are closed.