Dbx Project 1 296 Spectral Enhancer 621 121712

May 30th, 2009 by admin Leave a reply »

Dbx Project 1 Powered Mixer


Dbx Project 1 Powered Mixer


$99.99


Save BIG when you buy today!

Dbx Single Channel Strip With Compressor/Expander/Gate/De-Esser/Enhancer


Dbx Single Channel Strip With Compressor/Expander/Gate/De-Esser/Enhancer


$199.95


The dbx 286s is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. Why mic up vocals and instruments through a noisy, blurry mixer? The sonically pristine dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy compressor to transparently smooth out uneven acoustic tracks or deliver that classic “in your face” vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps.

Used Dbx Single Channel Strip With Compressor/Expander/Gate/De-Esser/Enhancer


Used Dbx Single Channel Strip With Compressor/Expander/Gate/De-Esser/Enhancer


$175.96


The dbx 286s is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. Why mic up vocals and instruments through a noisy, blurry mixer? The sonically pristine dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy compressor to transparently smooth out uneven acoustic tracks or deliver that classic “in your face” vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps.

Dbx Pb-48 48-Point 1/4 Patchbay


Dbx Pb-48 48-Point 1/4 Patchbay


$109


Patchbays often go unappreciated until their contacts get rusty or you need just a few more connections. The dbx PB-48 48-point Patchbay takes care of both problems with the greatest of ease. This balanced DBX 1/4″ TRS patchbay has 48 easy-to-reach jacks in the front and rear-96 points in all. Each of its 24-card assemblies has 4 jacks and thumbscrews so switching from normalled to non-normalled positions is easy. Pure nickel silver self-cleaning contacts won't get funky and waste your connections. The patchbay uses one rackspace. You'll appreciate its dependability and the price!

dbx PB-48 48-Point 1/4 Patchbay


dbx PB-48 48-Point 1/4 Patchbay


$87.96


PB-48 48-Point QTR Patch Bay Well, its not very glamourous, but everybody needs a patchbay. And as for the PB48, it is a patchbay that just works, all the time, every time. The PB48 is a rugged, noise-free, versatile patchbay designed to serve all your patchbay needs, from providing clear and easy access to your mixer and other studio gear, to reducing the wear and tear on their jacks, to facilitating quick and precise rerouting of devices within your studio setup. See, not glamorous, but it works great.

Dbx Ieq-31 Graphic Eq


Dbx Ieq-31 Graphic Eq


$629.95


Uncompromised dbx sonic integrity enhanced with a powerful array of flexible features define the dbx iEQ-31 Graphic EQ. You get AFS one-touch feedback suppression, Type V noise reduction, and PeakStopPlus limiting. Switchable 6 or 15dB boost/cut range; 12dB input gain range; 40mm faders; and nonconductive nylon sliders give you precision command. 10Hz to 22kHz frequency response, 110dB dynamic range, 1/3-octave Constant Q frequency bands, and internal toroidal transformer. 1/4″ TRS, XLR, and Euroblock balanced and unbalanced RF-filtered inputs and outputs.Dual 31-band EQ AFS one-touch feedback suppression Type V noise reduction PeakStopPlus limiting Switchable 6 or 15dB boost/cut range 12dB input gain range 40mm faders Nonconductive nylon sliders 10Hz to 22kHz frequency response 110dB dynamic range 1/3-octave Constant Q frequency bands Internal toroidal transformer 1/4″ TRS, XLR, and Euroblock balanced and unbalanced RF-filtered inputs and outputs

Dbx 560A 500 Series Compressor / Limiter


Dbx 560A 500 Series Compressor / Limiter


$199.95


The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to the 900 Series and the 560A continues that tradition.Featuring the same switch-selectable OverEasy and Hard Knee compression curves as the industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! Its also versatile enough to go from subtle compression to “brick wall” peak limiting.Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560A’s Hard Knee compression and high ratios for bombproof protection against overload distortion in digital recording, P.A. systems and broadcast signals.The 560A’s 19-segment, switchable Input/Output LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the dbx 560A’s unique “INFINITY +” inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway mix levels.OverEasy or classic hard knee compression with dbx’ ultra-musical program dependent attack and release timesCompression ratio variable from 1:1 through infinity:1 to -1:1Precise RMS gain reduction and input/output meter displays with calibration control for different operating levelsTrue RMS level detectionExclusive Infinity+ compression using negative ratios

Dbx Db10 Passive Direct Box Black


Dbx Db10 Passive Direct Box Black


$79


The dbx dB10 is a passive direct box that features custom dbx mu-metal-shielded audio transformers, high-quality Neutrik connectors, and low-noise circuitry. The dB10 direct box includes a pad switch that accommodates instrument, line, and even speaker level signals. Take even more control of your sound by utilizing the dB10 passive direct box’s polarity invert switch to set the phase relationship between the direct and the mic’d sound. As a professional, you don’t have time for interference, so dbx includes a ground lift switch in the db10 passive DI box to solve potential hum and buzz problems due to ground loops. And between the combined shielding of the db10′s cast metal chassis and the custom-wound transformer, you can be doubly assured of a clean signal free from interference. All of this sits atop the dbx dB10 direct box’s solid, stable footprint, that keeps the dB10 box from being dragged around the stage. The dbx DB10 Passive Direct Box also has a uniquely contoured underside that allows secure stacking of multiple units.Input Section: Input: 1 instrument/line/speaker level Connector: 1/4″ jack Type: Unbalanced, RF filtered Impedance: 150k Ohm typical Max Input Level: +20dBu (0dB pad) +40dBu (20dB pad) +60dBu (40dB pad) Output Section: Thru Output: 1 parallel connection from input jack Connector: 1/4″ jack Type: Unbalanced, RF filtered Main Output: 1 line level Connector: XLR male jack Type: Balanced Impedance: 150 Ohm typical Max Output Level: 0dBu Performance: Transformer: Custom dbx mu-metal-shielded Frequency Response: 20Hz to 20kHz, 2.5dB Noise:

Used Dbx Db12 Active Direct Box Black


Used Dbx Db12 Active Direct Box Black


$100.32


The dbx dB12 is an active direct box that utilizes custom dbx mu-metal-shielded audio transformers, high-quality Neutrik connectors, and low-noise circuitry. The dB12 direct box includes a pad switch that accommodates instrument, line, and even speaker level signals. Take even more control of your sound by utilizing the dB12 direct box’s polarity invert switch to set the phase relationship between the direct and mic’d sound. As a professional, you don’t have time for interference, so dbx includes a ground lift switch in the dB12 active direct box to solve potential hum and buzz problems due to ground loops. And between the combined shielding of the cast metal chassis and the custom-wound transformer, you can be doubly assured of a clean signal free from interference. All of this sits atop a solid, stable footprint, that will keep the dB12 direct box from being dragged around the stage. Unique contoured underside allows secure stacking of multiple dbx dB12 Active Direct Box units. Input Section Input: 1 instrument/line/speaker level Connector: 1/4″ jack Type: Unbalanced, RF filtered Impedance: 1M Ohm (0dB pad) 47k Ohm (20dB pad) 47k Ohm (40dB pad) Max Input Level: +10dBu (0dB pad) +30dBu (20dB pad) +50dBu (40dB pad) Output Section Thru Output: 1 parallel connection from input jack Connector: 1/4″ jack Type: Unbalanced, RF filtered Main Output: 1 line level Connector: XLR male jack Type: Balanced Impedance: 150 Ohm typical Max Output Level: +8dBu into 600 Ohm Performance Transformer: Custom dbx mu-metal-shielded Frequency Response: 20Hz to 20kHz, 3dB 30Hz to 20kHz, +0/-1dB Noise:

Dbx Db12 Active Direct Box Black


Dbx Db12 Active Direct Box Black


$114


The dbx dB12 is an active direct box that utilizes custom dbx mu-metal-shielded audio transformers, high-quality Neutrik connectors, and low-noise circuitry. The dB12 direct box includes a pad switch that accommodates instrument, line, and even speaker level signals. Take even more control of your sound by utilizing the dB12 direct box’s polarity invert switch to set the phase relationship between the direct and mic’d sound. As a professional, you don’t have time for interference, so dbx includes a ground lift switch in the dB12 active direct box to solve potential hum and buzz problems due to ground loops. And between the combined shielding of the cast metal chassis and the custom-wound transformer, you can be doubly assured of a clean signal free from interference. All of this sits atop a solid, stable footprint, that will keep the dB12 direct box from being dragged around the stage. Unique contoured underside allows secure stacking of multiple dbx dB12 Active Direct Box units. Input Section Input: 1 instrument/line/speaker level Connector: 1/4″ jack Type: Unbalanced, RF filtered Impedance: 1M Ohm (0dB pad) 47k Ohm (20dB pad) 47k Ohm (40dB pad) Max Input Level: +10dBu (0dB pad) +30dBu (20dB pad) +50dBu (40dB pad) Output Section Thru Output: 1 parallel connection from input jack Connector: 1/4″ jack Type: Unbalanced, RF filtered Main Output: 1 line level Connector: XLR male jack Type: Balanced Impedance: 150 Ohm typical Max Output Level: +8dBu into 600 Ohm Performance Transformer: Custom dbx mu-metal-shielded Frequency Response: 20Hz to 20kHz, 3dB 30Hz to 20kHz, +0/-1dB Noise:

Dbx 1215 Dual 15-Band Graphic Equalizer


Dbx 1215 Dual 15-Band Graphic Equalizer


$289


Designed for use in the most demanding live situations, the dbx 1215 Dual 15-Band Graphic Equalizer provides dual channels, 15 – 2/3-octave bands, ISO frequency centers, 12dB input gain range, and switchable 40Hz/18dB per octave low-cut filters. Other quality features of the dbx 1215 EQ include 45mm faders; selectable 6dB or 15dB boost/cut range; XLR, barrier strip, and 1/4″ TRS connectors; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation.Switchable boost/cut range between 6dB and 15dB Electronically balanced/unbalanced inputs Servo balanced/unbalanced outputs RF filtered inputs and outputs XLR, barrier strip, and 1/4″ TRS connectors -12dB/+12dB input gain range 18dB/octave 40Hz Bessel low-cut filter Chassis/signal ground lift capability Internal power supply transformer Power-off hardwire relay bypass with 2-second power-up delay

dbx dB12 Active Direct Box Black


dbx dB12 Active Direct Box Black


$100.32


The dbx dB12 is an active direct box that utilizes custom dbx mu-metal-shielded audio transformers, high-quality Neutrik connectors, and low-noise circuitry. The dB12 direct box includes a pad switch that accommodates instrument, line, and even speaker level signals. Take even more control of your sound by utilizing the dB12 direct boxs polarity invert switch to set the phase relationship between the direct and micd sound. As a professional, you dont have time for interference, so dbx includes a ground lift switch in the dB12 active direct box to solve potential hum and buzz problems due to ground loops. And between the combined shielding of the cast metal chassis and the custom-wound transformer, you can be doubly assured of a clean signal free from interference. All of this sits atop a solid, stable footprint, that will keep the dB12 direct box from being dragged around the stage. Unique contoured underside allows secure stacking of multiple dbx dB12 Active Direct Box units. Input Section Input 1 instrumentlinespeaker level Connector 14quot jack Type Unbalanced, RF filtered Impedance 1M Ohm 0dB pad 47k Ohm 20dB pad 47k Ohm 40dB pad Max Input Level 10dBu 0dB pad 30dBu 20dB pad 50dBu 40dB pad Output Section Thru Output 1 parallel connection from input jack Connector 14quot jack Type Unbalanced, RF filtered Main Output 1 line level Connector XLR male jack Type Balanced Impedance 150 Ohm typical Max Output Level 8dBu into 600 Ohm Performance Transformer Custom dbx mu-metal-shielded Frequency Response 20Hz to 20kHz, 3dB 30Hz to 20kHz, 0-1dB Noise

Used Dbx 266Xs Compressor/Gate


Used Dbx 266Xs Compressor/Gate


$131.96


The dbx 266xs Compressor/Gate is the latest in a long line of the world’s most successful compressors from the inventors of the technology. Its patented Overeasy compression technology provides smooth and musical performance while the AutoDynamic attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 266xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4″ TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches. Adding a dbx 266xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix – adding greater clarity and making them stand out from the surrounding instruments Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes New gate timing algorithms ensure the smoothest release characteristics Program-adaptive expander/gates Great sounding dynamics control for any type of program material Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup Stereo or dual-mono operation Balanced inputs and outputs on 1/4″ TRS and XLR connectors Side Chain insert Classic dbx “Auto” mode

Dbx 131S Single Channel 31-Band Graphic Equalizer


Dbx 131S Single Channel 31-Band Graphic Equalizer


$179


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 131s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 131s includes a single 31-band channel of 1/3-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 110 dB dynamic range to the quality componentry and meticulous attention to detail, the 131s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 131s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. With such affordable quality, there’s no longer any excuse for compromising your sound. Single 31-band, 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of 6 or 12dB 12dB per octave, 3dB down @ 50Hz low-cut filter Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inputs and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB

Dbx 266Xs Compressor/Gate


Dbx 266Xs Compressor/Gate


$149.95


The dbx 266xs Compressor/Gate is the latest in a long line of the world’s most successful compressors from the inventors of the technology. Its patented Overeasy compression technology provides smooth and musical performance while the AutoDynamic attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 266xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4″ TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches. Adding a dbx 266xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix – adding greater clarity and making them stand out from the surrounding instruments Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes New gate timing algorithms ensure the smoothest release characteristics Program-adaptive expander/gates Great sounding dynamics control for any type of program material Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup Stereo or dual-mono operation Balanced inputs and outputs on 1/4″ TRS and XLR connectors Side Chain insert Classic dbx “Auto” mode

Dbx 234S Stereo 2/3 Way Mono 4-Way Crossover


Dbx 234S Stereo 2/3 Way Mono 4-Way Crossover


$219


The dbx 234s Stereo 2/3 Way Mono 4-Way Crossover is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid “click” controls to the high quality 1/4″ TRS inputs and outputs. The 234s uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234s leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. TRS differentially balanced ins and outs Mode switches for mono 4-way or stereo 2-way/3-way operation Low frequency summed (subwoofer) output x10 range switch on both channels 40Hz high pass (low cut) filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters (the professional standard) Stereo/Mono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTL/C approved CE compliant Connectors: 1/4″ TRS Type: Electronically balanced/unbalanced, RF filtered Impedance: Balanced >50k ohm, unbalanced >25k ohm Max Input Level: >+22dBu balanced or unbalanced CMRR: >40dB, typically >50dB at 1kHz

Dbx 231S Dual Channel 31-Band Graphic Equalizer


Dbx 231S Dual Channel 31-Band Graphic Equalizer


$219


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 231s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. <BR/> <BR/>The dbx 231s includes two 31-band channels of 1/3-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 231s offers exceptional sound and rugged reliability that guarantees you will always sound your best. <BR/> <BR/>Sure to find a home in the studio, on tour and with installed sound venues, the dbx 231s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional's choice in signal processing. With such affordable quality, there's no longer any excuse for compromising your sound. <BR/><ul><li>Dual 31-band, 1/3-octave Constant Q frequency bands </li><li>Switchable boost/cut ranges of 6 or 12 dB </li><li>Front panel bypass switch </li><li>12 dB input gain range </li><li>4-segment LED ladders for monitoring output levels </li><li>XLR and TRS Inpts and Outputs </li><li>Frequency Repsonse of <10Hz to >50kHz </li><li>Dynamic range of greater than 108dB </li></ul>

Dbx 215S Dual Channel 15-Band Graphic Equalizer


Dbx 215S Dual Channel 15-Band Graphic Equalizer


$179


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 215s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 215s includes two 15-band channels of 2/3-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 215s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 215s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. Dual 15-band, 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of 6 or 12 dB Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inpts and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB

Used Dbx 215S Dual Channel 15-Band Graphic Equalizer Regular 190839718693


Used Dbx 215S Dual Channel 15-Band Graphic Equalizer Regular 190839718693


$143.2


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 215s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 215s includes two 15-band channels of 2/3-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 215s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 215s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. Dual 15-band, 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of 6 or 12 dB Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inpts and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB

Dbx 220I 2X2 Loudspeaker Management System With Display


Dbx 220I 2X2 Loudspeaker Management System With Display


$629.95


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 220i provides both system and microphone processing thanks to its full set of processing features and mic/line inputs. Click on the “View additional manufacturer information” link below to get the full scoop!Advanced feedback suppression (AFS) Graphic and parametric EQ Compressor Limiter Auto gain control Noise gating De-esser Ducker Bandpass filters 2×2 matrix mixer 1.3 seconds of delay RS-232 PC GUI control Mic/line inputs Wall panel control Security lockout
Advertisement

Comments are closed.