DBX DRIVE RACK 260 Standard

August 6th, 2009 by admin Leave a reply »

Dbx Drive Rack 260 With Rta-M Reference Mic


Dbx Drive Rack 260 With Rta-M Reference Mic


$1099.94


The DriveRack 260 with RTA-M Reference Microphone includes the DriveRack 260 Complete Equalization and Loudspeaker Management System and the DBX RTA-M Reference Microphone. The 260 DriveRack essentially becomes the only device that you will need between the mixer and the power amps. DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application.DriveRack 260 DriveRack 260 Complete Equalization and Loudspeaker Management SystemThe DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI software control provides easy PC-based control.RTA-M Reference MicrophoneThe DBX RTA-M Reference Microphone is omnidirectional, and has a flat frequency response, making it ideal an a measurement microphone. The RTA-M was designed to work with the DBX DriveRack Loudspeaker Management Systems for feedback elimination in venues and studios.Feedback elimination2.7 seconds of alignment and zone delayRS-232 PC GUI Software Interface controlClassic dbx compression and limitingGraphic and parametric EQsAuto-EQ functionFull bandpass, crossover, and routing configurationsAuto gain controlPink noise generator and fulltime RTASetup wizard with JBL speaker and Crown power amplifier tuningsSecurity lockoutWall panel control inputs for permanent installations

Dbx Dbxzcv-Fire Wall Mount Drive Rack Zone Control


Dbx Dbxzcv-Fire Wall Mount Drive Rack Zone Control


$69


Save BIG when you buy today!

Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System


Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System


$454.99


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Black


Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Black


$639


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

dbx DriveRack 260 Complete Equalization and Loudspeaker Control System


dbx DriveRack 260 Complete Equalization and Loudspeaker Control System


$562.32


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters to provide protection against speaker blowouts, and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Regular 190839685971


Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Regular 190839685971


$511.2


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

dbx DriveRack 260 Complete Equalization and Loudspeaker Control System Regular 1


dbx DriveRack 260 Complete Equalization and Loudspeaker Control System Regular 1


$511.2


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters to provide protection against speaker blowouts, and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Dbx Zc-4 Wall Mount Zone Control


Dbx Zc-4 Wall Mount Zone Control


$64.99


The Zone Controllers, like this ZC-4, offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1,000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for ZonePRO devices.

dbx ZC-4 Wall Mount Zone Control


dbx ZC-4 Wall Mount Zone Control


$99.95


The Zone Controllers, like this ZC-4, offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1,000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260 it can also provide source selection, page steering, or scene selection for ZonePRO devices.

dbx 234s Stereo 2/3 Way Mono 4-Way Crossover Regular 190839151650


dbx 234s Stereo 2/3 Way Mono 4-Way Crossover Regular 190839151650


$159.96


The dbx 234s Stereo 23 Way Mono 4-Way Crossover is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality 14 TRS inputs and outputs. The 234s uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234s leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. TRS differentially balanced ins and outs Mode switches for mono 4-way or stereo 2-way3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant Connectors 14 TRS Type Electronically balancedunbalanced, RF filtered Impedance Balanced >50k ohm, unbalanced >25k ohm Max Input Level >22dBu balanced or unbalanced CMRR >40dB, typically >50dB at 1kHz

dbx 223xs Stereo 2-Way/Mono 3-Way Crossover


dbx 223xs Stereo 2-Way/Mono 3-Way Crossover


$158.36


With the dbx 223xs Crossover youll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the worlds finest processors. The dbx 223xs Crossover uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality XLR inputs and outputs. XLR balanced ins and outs Mode switch for stereo 2-way or mono 3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant

dbx 234xs Stereo 2/3 Way, Mono 4-Way Crossover


dbx 234xs Stereo 2/3 Way, Mono 4-Way Crossover


$259


The secret to making speakers sound great lies with the crossover you use. With the dbx 234xs Crossover youll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the worlds finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality XLR inputs and outputs. XLR balanced ins and outs Mode switches for mono 4-way or stereo 2-way3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant

dbx 234s Stereo 2/3 Way Mono 4-Way Crossover Regular 190839126535


dbx 234s Stereo 2/3 Way Mono 4-Way Crossover Regular 190839126535


$123.97


The dbx 234s Stereo 23 Way Mono 4-Way Crossover is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality 14 TRS inputs and outputs. The 234s uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234s leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. TRS differentially balanced ins and outs Mode switches for mono 4-way or stereo 2-way3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant Connectors 14 TRS Type Electronically balancedunbalanced, RF filtered Impedance Balanced >50k ohm, unbalanced >25k ohm Max Input Level >22dBu balanced or unbalanced CMRR >40dB, typically >50dB at 1kHz

Dbx 223Xs Stereo 2-Way/Mono 3-Way Crossover


Dbx 223Xs Stereo 2-Way/Mono 3-Way Crossover


$199


With the dbx 223xs Crossover you’ll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world’s finest processors. The dbx 223xs Crossover uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid “click” controls to the high quality XLR inputs and outputs. XLR balanced ins and outs Mode switch for stereo 2-way or mono 3-way operation Low frequency summed (subwoofer) output x10 range switch on both channels 40Hz high pass (low cut) filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters (the professional standard) Stereo/Mono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTL/C approved CE compliant

Dbx 234Xs Stereo 2/3 Way, Mono 4-Way Crossover


Dbx 234Xs Stereo 2/3 Way, Mono 4-Way Crossover


$259


The secret to making speakers sound great lies with the crossover you use. With the dbx 234xs Crossover you’ll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world’s finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid “click” controls to the high quality XLR inputs and outputs. XLR balanced ins and outs Mode switches for mono 4-way or stereo 2-way/3-way operation Low frequency summed (subwoofer) output x10 range switch on both channels 40Hz high pass (low cut) filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters (the professional standard) Stereo/Mono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTL/C approved CE compliant

dbx 234xs Stereo 2/3 Way, Mono 4-Way Crossover Regular 190839210197


dbx 234xs Stereo 2/3 Way, Mono 4-Way Crossover Regular 190839210197


$191.96


The secret to making speakers sound great lies with the crossover you use. With the dbx 234xs Crossover youll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the worlds finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality XLR inputs and outputs. XLR balanced ins and outs Mode switches for mono 4-way or stereo 2-way3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant

Dbx 234S Stereo 2/3 Way Mono 4-Way Crossover


Dbx 234S Stereo 2/3 Way Mono 4-Way Crossover


$219


The dbx 234s Stereo 2/3 Way Mono 4-Way Crossover is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid “click” controls to the high quality 1/4″ TRS inputs and outputs. The 234s uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234s leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. TRS differentially balanced ins and outs Mode switches for mono 4-way or stereo 2-way/3-way operation Low frequency summed (subwoofer) output x10 range switch on both channels 40Hz high pass (low cut) filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters (the professional standard) Stereo/Mono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTL/C approved CE compliant Connectors: 1/4″ TRS Type: Electronically balanced/unbalanced, RF filtered Impedance: Balanced >50k ohm, unbalanced >25k ohm Max Input Level: >+22dBu balanced or unbalanced CMRR: >40dB, typically >50dB at 1kHz

dbx 234s Stereo 2/3 Way Mono 4-Way Crossover


dbx 234s Stereo 2/3 Way Mono 4-Way Crossover


$219


The dbx 234s Stereo 23 Way Mono 4-Way Crossover is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality 14 TRS inputs and outputs. The 234s uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234s leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. TRS differentially balanced ins and outs Mode switches for mono 4-way or stereo 2-way3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant Connectors 14quot TRS Type Electronically balancedunbalanced, RF filtered Impedance Balanced >50k ohm, unbalanced >25k ohm Max Input Level >22dBu balanced or unbalanced CMRR >40dB, typically >50dB at 1kHz

dbx 234xs Stereo 2/3 Way, Mono 4-Way Crossover Regular 190839476555


dbx 234xs Stereo 2/3 Way, Mono 4-Way Crossover Regular 190839476555


$191.96


The secret to making speakers sound great lies with the crossover you use. With the dbx 234xs Crossover youll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the worlds finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality XLR inputs and outputs. XLR balanced ins and outs Mode switches for mono 4-way or stereo 2-way3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant

dbx ZonePRO 640 Speaker Processor


dbx ZonePRO 640 Speaker Processor


$599


With 6 inputs and 4 outputs the dbx ZonePRO 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.Designed to offer superior system sonic performance and flexibility, the 640641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.Beyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoringAdvanced Feedback Suppression AFSAutowarmthAuto Gain ControlCompressionLimitingNoise GatingNotch FilteringBandpass and Crossover FiltersParametric EQSecurity LockoutWall Panel ControlRS-232 ControlWindows 2000 and XP GUIIEC, UL and CSA Approvals

Dbx Zonepro 640 Speaker Processor


Dbx Zonepro 640 Speaker Processor


$599


With 6 inputs and 4 outputs the dbx ZonePRO 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.Designed to offer superior system sonic performance and flexibility, the 640/641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.Beyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoringAdvanced Feedback Suppression (AFS)AutowarmthAuto Gain ControlCompressionLimitingNoise GatingNotch FilteringBandpass and Crossover FiltersParametric EQSecurity LockoutWall Panel ControlRS-232 ControlWindows 2000 and XP GUIIEC, UL and CSA Approvals

dbx ZonePRO 640 Speaker Processor  888365966595


dbx ZonePRO 640 Speaker Processor 888365966595


$439.96


With 6 inputs and 4 outputs the dbx ZonePRO 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.Designed to offer superior system sonic performance and flexibility, the 640641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.Beyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoring the ZonePRO Designer software provides an intuitive interface and a speedy setup Wizard for configuring and editing all system parameters.The ZonePRO 640 will take your Commercial Audio system to the next level with advanced processing, versatility and control.Advanced Feedback Suppression AFSAutowarmthAuto Gain ControlCompressionLimitingNoise GatingNotch FilteringBandpass and Crossover FiltersParametric EQSecurity LockoutWall Panel ControlRS-232 ControlWindows 2000 and XP GUIIEC, UL and CSA Approvals

Dbx 560A 500 Series Compressor / Limiter


Dbx 560A 500 Series Compressor / Limiter


$199.95


The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to the 900 Series and the 560A continues that tradition.Featuring the same switch-selectable OverEasy and Hard Knee compression curves as the industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! Its also versatile enough to go from subtle compression to “brick wall” peak limiting.Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560A’s Hard Knee compression and high ratios for bombproof protection against overload distortion in digital recording, P.A. systems and broadcast signals.The 560A’s 19-segment, switchable Input/Output LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the dbx 560A’s unique “INFINITY +” inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway mix levels.OverEasy or classic hard knee compression with dbx’ ultra-musical program dependent attack and release timesCompression ratio variable from 1:1 through infinity:1 to -1:1Precise RMS gain reduction and input/output meter displays with calibration control for different operating levelsTrue RMS level detectionExclusive Infinity+ compression using negative ratios
Advertisement

Comments are closed.