DBX 480 P Power Supply Unit

May 4th, 2012 by admin Leave a reply »

Dbx Driverack Eq Combo W Power Supply Signal Processor


Dbx Driverack Eq Combo W Power Supply Signal Processor


$924.99


DRIVERACK 481 EQ & LOUDSPEAKER W/480 P REMOTE POWER SYSTEM.

Dbx 2331 Equalizer/Limiter With Type Iii Nr Equalizer


Dbx 2331 Equalizer/Limiter With Type Iii Nr Equalizer


$224.99


Included accessories: Power Cable/Supply.

Dbx 1215 Dual 15-Band Graphic Equalizer


Dbx 1215 Dual 15-Band Graphic Equalizer


$289


Designed for use in the most demanding live situations, the dbx 1215 Dual 15-Band Graphic Equalizer provides dual channels, 15 – 2/3-octave bands, ISO frequency centers, 12dB input gain range, and switchable 40Hz/18dB per octave low-cut filters. Other quality features of the dbx 1215 EQ include 45mm faders; selectable 6dB or 15dB boost/cut range; XLR, barrier strip, and 1/4″ TRS connectors; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation.Switchable boost/cut range between 6dB and 15dB Electronically balanced/unbalanced inputs Servo balanced/unbalanced outputs RF filtered inputs and outputs XLR, barrier strip, and 1/4″ TRS connectors -12dB/+12dB input gain range 18dB/octave 40Hz Bessel low-cut filter Chassis/signal ground lift capability Internal power supply transformer Power-off hardwire relay bypass with 2-second power-up delay

dbx 1215 Dual 15-Band Graphic Equalizer


dbx 1215 Dual 15-Band Graphic Equalizer


$289


Designed for use in the most demanding live situations, the dbx 1215 Dual 15-Band Graphic Equalizer provides dual channels, 15 – 23-octave bands, ISO frequency centers, 12dB input gain range, and switchable 40Hz18dB per octave low-cut filters. Other quality features of the dbx 1215 EQ include 45mm faders selectable 6dB or 15dB boostcut range XLR, barrier strip, and 14 TRS connectors balanced inputs and outputs for quiet operation and chassissignal ground lift capabilities for quick hum isolation.Switchable boostcut range between 6dB and 15dB Electronically balancedunbalanced inputs Servo balancedunbalanced outputs RF filtered inputs and outputs XLR, barrier strip, and 14quot TRS connectors -12dB12dB input gain range 18dBoctave 40Hz Bessel low-cut filter Chassissignal ground lift capability Internal power supply transformer Power-off hardwire relay bypass with 2-second power-up delay

Dbx Di1 Active Direct Box


Dbx Di1 Active Direct Box


$109


The dbx DI1 is a compact, high-quality active direct injection box. Ideal for both studios and on the road, the DI1 will ensure audio signals reach their intended destination in both a balanced format and free from unwanted noise.<br><br>Connect the output from electric guitars, bass amplifiers, keyboards, etc, directly to a console mixer without the use of a microphone. Built for toughness and reliability, the DI1 has all the features of a fully featured gig-ready workhorse DI unit.<ul><li>Level and impedance matching function</li><li>Output impedance: > 600 Ohms</li><li>Signal pass through connector</li><li>Output connector: XLR balanced</li><li>Battery LED indicator</li><li>Distortion: (THD) < 0.005% at 1kHz, 0dBu</li><li>Phantom power led indicator</li><li>Max Input: +12dBu (at 0dB) Level +32dBu (at -20dB) +52dBu (at -40dB)</li><li>Output Noise: <-100dB unweighted</li><li>TS and XLR inputs and outputs</li><li>Frequency response: 10Hz to 70kHz, +0dB/-3dB</li><li>Attenuation control</li><li>Phantom Power: +18 volts DC to +48 volts DC</li><li>Ground lift switch</li><li>Main/Standby: 9V battery</li><li>Input Impedance: >250k Ohm</li><li>Metal Chassis</li></ul>

Dbx Rta-M Reference Microphone For Driverack Pa


Dbx Rta-M Reference Microphone For Driverack Pa


$99.95


Omni-directional, flat frequency, measurement mic. Requires phantom power.

Dbx 2006 166Ae Exciter


Dbx 2006 166Ae Exciter


$89.99


<!– Begin Made In –><p />Made In: China<!– End Made In –>.

Dbx 2009 263A Vocal Processor


Dbx 2009 263A Vocal Processor


$39.99


<!– Begin Made In –><p />Made In: Japan<!– End Made In –>.

Dbx Zonepro 640 Speaker Processor


Dbx Zonepro 640 Speaker Processor


$599


With 6 inputs and 4 outputs the dbx ZonePRO 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.Designed to offer superior system sonic performance and flexibility, the 640/641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.Beyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoringAdvanced Feedback Suppression (AFS)AutowarmthAuto Gain ControlCompressionLimitingNoise GatingNotch FilteringBandpass and Crossover FiltersParametric EQSecurity LockoutWall Panel ControlRS-232 ControlWindows 2000 and XP GUIIEC, UL and CSA Approvals

Dbx Project 1 266 Compressor/Gate Compressor


Dbx Project 1 266 Compressor/Gate Compressor


$49.99


<!– Begin Made In –><p />Made In: United States<!– End Made In –>.

Dbx 530 Series Parametric Eq


Dbx 530 Series Parametric Eq


$219


<p>The dbx 530 Parametric EQ offers a unique degree of equalization flexibility in the popular 500 Series format. Based upon the classic dbx 905, the dbx 530 is an uncompromising equalizer offering true, fully parametric operation of all three filter bands. dbx has a much-heralded history with modular processors dating back to the 900 Series, and the dbx 530 continues that tradition.</p> <p></p> <p>The dbx 530's overlapping bands each offer control of frequency bandwidth (Q) and up to 15dB of reciprocal cut or boost to provide exact, complimentary filter action for the most demanding of equalization needs. For problem situations requiring the removal of spurious signals, each of the bands can be independently switched into infinite notch mode without affecting the operation of others. </p> <p></p> <span style=”font-size: 12pt; font-family: Cambria;”>In situations where a shelving equalizer will produce better results than a peaking one, the 530s high and low bands can be independently switched from peaking to shelving operation. You can also make instant affected/bypassed comparisons using the 530's On switch.</span><ul><li><p>Based on the classic dbx 905</p> <p>3-band parametric EQ</p> <p>Selectable bell or shelf type filters on low and high frequency bands</p> <p>Adjustable Q on each band</p></li></ul>

dbx ZonePRO 640 Speaker Processor  888365966595


dbx ZonePRO 640 Speaker Processor 888365966595


$439.96


With 6 inputs and 4 outputs the dbx ZonePRO 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.Designed to offer superior system sonic performance and flexibility, the 640641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.Beyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoring the ZonePRO Designer software provides an intuitive interface and a speedy setup Wizard for configuring and editing all system parameters.The ZonePRO 640 will take your Commercial Audio system to the next level with advanced processing, versatility and control.Advanced Feedback Suppression AFSAutowarmthAuto Gain ControlCompressionLimitingNoise GatingNotch FilteringBandpass and Crossover FiltersParametric EQSecurity LockoutWall Panel ControlRS-232 ControlWindows 2000 and XP GUIIEC, UL and CSA Approvals

dbx Di1 Active Direct Box


dbx Di1 Active Direct Box


$109


The dbx DI1 is a compact, high-quality active direct injection box. Ideal for both studios and on the road, the DI1 will ensure audio signals reach their intended destination in both a balanced format and free from unwanted noise.Connect the output from electric guitars, bass amplifiers, keyboards, etc, directly to anbspconsole mixer without the use of a microphone.nbspBuilt for toughness and reliability, the DI1 has all the features of a fully featured gig-ready workhorse DI unit.Level and impedance matching functionOutput impedance gt 600 OhmsSignal pass through connectorOutput connector XLR balancedBattery LED indicatorDistortion THD lt 0.005 at 1kHz, 0dBuPhantom power led indicatorMax Input 12dBu at 0dB Level 32dBu at -20dB 52dBu at -40dBOutput Noise lt-100dB unweightedTS and XLR inputs and outputsFrequency response 10Hz to 70kHz, 0dB-3dBAttenuation controlPhantom Power 18 volts DC to 48 volts DCGround lift switchMainStandby 9V batteryInput Impedance gt250k OhmMetal Chassis

Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Black


Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Black


$639


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. <BR/> <BR/>The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. <BR/> <BR/>Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination <BR/>2.7 seconds of alignment and zone delay <BR/>RS-232 PC GUI control <BR/>Classic dbx compression and limiting <BR/>Graphic and parametric EQs <BR/>Auto-EQ function <BR/>Full bandpass, crossover, and routing configurations <BR/>Auto gain control <BR/>Pink noise generator and fulltime RTA <BR/>Setup wizard with JBL speaker and Crown power amplifier tunings <BR/>Security lockout <BR/>Wall panel control inputs for permanent installations <BR/>

dbx DriveRack 260 Complete Equalization and Loudspeaker Control System


dbx DriveRack 260 Complete Equalization and Loudspeaker Control System


$562.32


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters to provide protection against speaker blowouts, and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Dbx Drive Rack 260 With Rta-M Reference Mic


Dbx Drive Rack 260 With Rta-M Reference Mic


$738.95


The DriveRack 260 with RTA-M Reference Microphone includes the DriveRack 260 Complete Equalization and Loudspeaker Management System and the DBX RTA-M Reference Microphone. The 260 DriveRack essentially becomes the only device that you will need between the mixer and the power amps. DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application.DriveRack 260 DriveRack 260 Complete Equalization and Loudspeaker Management SystemThe DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI software control provides easy PC-based control.RTA-M Reference MicrophoneThe DBX RTA-M Reference Microphone is omnidirectional, and has a flat frequency response, making it ideal an a measurement microphone. The RTA-M was designed to work with the DBX DriveRack Loudspeaker Management Systems for feedback elimination in venues and studios.Feedback elimination2.7 seconds of alignment and zone delayRS-232 PC GUI Software Interface controlClassic dbx compression and limitingGraphic and parametric EQsAuto-EQ functionFull bandpass, crossover, and routing configurationsAuto gain controlPink noise generator and fulltime RTASetup wizard with JBL speaker and Crown power amplifier tuningsSecurity lockoutWall panel control inputs for permanent installations

dbx DriveRack 260 Complete Equalization and Loudspeaker Control System Black


dbx DriveRack 260 Complete Equalization and Loudspeaker Control System Black


$639


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters to provide protection against speaker blowouts, and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System


Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System


$454.99


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Regular 190839685971


Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Regular 190839685971


$511.2


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

dbx DriveRack 260 Complete Equalization and Loudspeaker Control System Regular 1


dbx DriveRack 260 Complete Equalization and Loudspeaker Control System Regular 1


$511.2


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters to provide protection against speaker blowouts, and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Dbx 220I 2X2 Loudspeaker Management System With Display


Dbx 220I 2X2 Loudspeaker Management System With Display


$629.95


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 220i provides both system and microphone processing thanks to its full set of processing features and mic/line inputs. Click on the “View additional manufacturer information” link below to get the full scoop!Advanced feedback suppression (AFS) Graphic and parametric EQ Compressor Limiter Auto gain control Noise gating De-esser Ducker Bandpass filters 2×2 matrix mixer 1.3 seconds of delay RS-232 PC GUI control Mic/line inputs Wall panel control Security lockout

DRIVERACKPA2 Complete Loudspeaker Management System


DRIVERACKPA2 Complete Loudspeaker Management System


$523.9


The dbx Driverack is one of the most innovative and helpful tools to come along for the live sound engineer in decades. It incorporates crossover, EQ, compression, delay parameters and much more within individual presets. These presets can then be applied to specific rooms, expected environments and applications. The dbx Driverack PA2 incorporates heavily researched and well-considered improvements in the original Driverack system.Updated Wizard Setup FunctionsUpdated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date. Wizard functions on the DriveRack PA2 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system.Input Processingdbx Compression.AFS (Advanced Feedback Suppression).Graphic EQ.8-Band Parametric EQ (adjusted when using the AutoEQ).Subharmonic Synthesis.Output ProcessingCrossover (supports full range, 2-way, and 3-way systems).8-Band Parametric EQs (used for speaker tunings).dbx Limiting.Driver Alignment Delays.

dbx 223xs Stereo 2-Way/Mono 3-Way Crossover


dbx 223xs Stereo 2-Way/Mono 3-Way Crossover


$158.36


With the dbx 223xs Crossover youll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the worlds finest processors. The dbx 223xs Crossover uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality XLR inputs and outputs. XLR balanced ins and outs Mode switch for stereo 2-way or mono 3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant

dbx 234xs Stereo 2/3 Way, Mono 4-Way Crossover


dbx 234xs Stereo 2/3 Way, Mono 4-Way Crossover


$259


The secret to making speakers sound great lies with the crossover you use. With the dbx 234xs Crossover youll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the worlds finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality XLR inputs and outputs. XLR balanced ins and outs Mode switches for mono 4-way or stereo 2-way3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant

dbx 234s Stereo 2/3 Way Mono 4-Way Crossover Regular 190839126535


dbx 234s Stereo 2/3 Way Mono 4-Way Crossover Regular 190839126535


$123.97


The dbx 234s Stereo 23 Way Mono 4-Way Crossover is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality 14 TRS inputs and outputs. The 234s uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234s leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. TRS differentially balanced ins and outs Mode switches for mono 4-way or stereo 2-way3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant Connectors 14 TRS Type Electronically balancedunbalanced, RF filtered Impedance Balanced >50k ohm, unbalanced >25k ohm Max Input Level >22dBu balanced or unbalanced CMRR >40dB, typically >50dB at 1kHz
Advertisement

Comments are closed.