DBX 480-100-CBC

January 21st, 2012 by admin Leave a reply »

Dbx 150 Noise Gate


Dbx 150 Noise Gate


$69.99


Save BIG when you buy today!

Dbx Zc-4 Wall Mount Zone Control


Dbx Zc-4 Wall Mount Zone Control


$99.95


The Zone Controllers, like this ZC-4, offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1,000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.<br><br>The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for ZonePRO devices.<br>

Dbx 266Xl Compressor


Dbx 266Xl Compressor


$49.99


Save BIG when you buy today!

Dbx Db12 Active Direct Box Black


Dbx Db12 Active Direct Box Black


$114


The dbx dB12 is an active direct box that utilizes custom dbx mu-metal-shielded audio transformers, high-quality Neutrik connectors, and low-noise circuitry. The dB12 direct box includes a pad switch that accommodates instrument, line, and even speaker level signals. Take even more control of your sound by utilizing the dB12 direct box's polarity invert switch to set the phase relationship between the direct and mic'd sound. <BR/> <BR/>As a professional, you don't have time for interference, so dbx includes a ground lift switch in the dB12 active direct box to solve potential hum and buzz problems due to ground loops. And between the combined shielding of the cast metal chassis and the custom-wound transformer, you can be doubly assured of a clean signal free from interference. All of this sits atop a solid, stable footprint, that will keep the dB12 direct box from being dragged around the stage. Unique contoured underside allows secure stacking of multiple dbx dB12 Active Direct Box units. <BR/><b>Input Section</b> <BR/>Input: 1 instrument/line/speaker level <BR/>Connector: 1/4″ jack <BR/>Type: Unbalanced, RF filtered <BR/>Impedance: 1M Ohm (0dB pad) <BR/>47k Ohm (20dB pad) <BR/>47k Ohm (40dB pad) <BR/>Max Input Level: +10dBu (0dB pad) <BR/>+30dBu (20dB pad) <BR/>+50dBu (40dB pad) <BR/> <BR/><b>Output Section</b> <BR/>Thru Output: 1 parallel connection from input jack <BR/>Connector: 1/4″ jack <BR/>Type: Unbalanced, RF filtered <BR/>Main Output: 1 line level <BR/>Connector: XLR male jack <BR/>Type: Balanced <BR/>Impedance: 150 Ohm typical <BR/>Max Output Level: +8dBu into 600 Ohm <BR/> <BR/><b>Performance</b> <BR/>Transformer: Custom dbx mu-metal-shielded <BR/>Frequency Response: 20Hz to 20kHz, 3dB <BR/>30Hz to 20kHz, +0/-1dB <BR/>Noise: <-105dB unweighted, 22kHz BW <BR/>THD: <0.01%, 20Hz to 20kHz BW <BR/><0.005%, 1kHz, 0dBu output <BR/> <BR/><b>General</b> <BR/>Current Drain Phantom: < 8mA <BR/>Phantom Power Range: +48 volts DC <BR/>Dimensions: 5.82″ L X 5.44″ W X 2.20″ H (148 x 138 x 56mm) <BR/>Weight: 1.4 lbs / 0.65 kg <BR/>

Dbx 266A Compressor


Dbx 266A Compressor


$59.99


Save BIG when you buy today!

Dbx 3031 Equalizer


Dbx 3031 Equalizer


$119.99


Save BIG when you buy today!

Dbx 510 Series Subharmonic Synthesizer


Dbx 510 Series Subharmonic Synthesizer


$159


<p>Youve heard dbxs patented Subharmonic Synthesis before. It has provided chest-thumping, teeth-rattling, bone-jarring bass in nightclubs, theatre and film, music recording, live music performance and broadcasting for decades. dbxs Subharmonic Synthesis process produces a new, waveform-modeled bass note, exactly one octave below the bass in the original audio.</p> <p></p> <p>The dbx 510 answers the call of audio professionals everywhere delivering Subharmonic Synthesis in the convenient design of a 500 Series module. The 510s two separate bands of subharmonic synthesis provide smoothness and control, while the independent Low Frequency Boost circuit gets the most out of low frequency speaker systems. Unlike other bass synthesis modules, the dbx process produces musical low frequencies that dont interfere with mid and high-band information, even when the maximum synthesis and boost are applied. The result is a low-end punch that people really feel.</p><p></p> <p>Based on dbx's fabled Subharmonic Synthesizer processors</p> <p>Simple, intuitive interface</p> <p>Synthesized frequency level indicator LEDs</p> <p>Individual controls for two ranges of subharmonic frequencies</p> <p>Subharmonics level control</p> <p>Synthesis Bypass switch</p> <p></p>

Dbx Driverack Pa Dbxpav Equalizer


Dbx Driverack Pa Dbxpav Equalizer


$349.99


Save BIG when you buy today!

Dbx 166A Compressor


Dbx 166A Compressor


$69.99


Save BIG when you buy today!

Dbx 166 Compressor


Dbx 166 Compressor


$69.99


Save BIG when you buy today!

Dbx Dbxzc2v Wall Mount Zone Control With Mute


Dbx Dbxzc2v Wall Mount Zone Control With Mute


$59


Save BIG when you buy today!

Dbx 266Xs Compressor


Dbx 266Xs Compressor


$69.99


Save BIG when you buy today!

Dbx 560A Compressor


Dbx 560A Compressor


$159.99


Save BIG when you buy today!

Dbx 231 Dual 31-Band Graphic Equalizer


Dbx 231 Dual 31-Band Graphic Equalizer


$72.99


Save BIG when you buy today!

Dbx 560A 500 Series Compressor / Limiter


Dbx 560A 500 Series Compressor / Limiter


$199.95


The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to the 900 Series and the 560A continues that tradition.Featuring the same switch-selectable OverEasy and Hard Knee compression curves as the industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! Its also versatile enough to go from subtle compression to “brick wall” peak limiting.Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560A’s Hard Knee compression and high ratios for bombproof protection against overload distortion in digital recording, P.A. systems and broadcast signals.The 560A’s 19-segment, switchable Input/Output LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the dbx 560A’s unique “INFINITY +” inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway mix levels.OverEasy or classic hard knee compression with dbx’ ultra-musical program dependent attack and release timesCompression ratio variable from 1:1 through infinity:1 to -1:1Precise RMS gain reduction and input/output meter displays with calibration control for different operating levelsTrue RMS level detectionExclusive Infinity+ compression using negative ratios

Dbx 2231 Dual 31-Band Graphic Equalizer


Dbx 2231 Dual 31-Band Graphic Equalizer


$569


The dbx 2231 Dual 31-Band Graphic Equalizer gives you 2 channels with 31 bands, each 1/3 octave to achieve the most precise tone control you can get. The dbx 2231 equalizer combines a superb EQ circuit, a powerful limiter, and revolutionary Type III noise reduction that increases S/N ratio by 20dB. The PeakPlus limiter’s threshold ranges from 0dBu to +20dBu and can transparently tame the wildest hits or subtlest nuances of any signal. A 4-segment LED bar graph for both gain reduction and output level offers the most comprehensive visual feedback available. XLR, barrier strip, and 1/4″ connectors; 45mm nylon sliders; and 12dB input gain stage provide pro flexibility and performance. dbx also includes status LEDs for all settings on the front panel of the 2231 Dual Graphic Equalizer.Dual-channel 31-bands 1/3-octave per band PeakPlus limiter LED bar graph for gain reduction and output level Status LEDs for all settings on the front panel XLR, barrier strip, and 1/4″ connectors 45mm nylon sliders 12dB input gain stage

Dbx 1215 Dual 15-Band Graphic Equalizer


Dbx 1215 Dual 15-Band Graphic Equalizer


$289


Designed for use in the most demanding live situations, the dbx 1215 Dual 15-Band Graphic Equalizer provides dual channels, 15 – 2/3-octave bands, ISO frequency centers, 12dB input gain range, and switchable 40Hz/18dB per octave low-cut filters. Other quality features of the dbx 1215 EQ include 45mm faders; selectable 6dB or 15dB boost/cut range; XLR, barrier strip, and 1/4″ TRS connectors; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation.Switchable boost/cut range between 6dB and 15dB Electronically balanced/unbalanced inputs Servo balanced/unbalanced outputs RF filtered inputs and outputs XLR, barrier strip, and 1/4″ TRS connectors -12dB/+12dB input gain range 18dB/octave 40Hz Bessel low-cut filter Chassis/signal ground lift capability Internal power supply transformer Power-off hardwire relay bypass with 2-second power-up delay

Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System


Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System


$454.99


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Used Dbx Dbxzc9v Wall Mount Zone Volume Control&*


Used Dbx Dbxzc9v Wall Mount Zone Volume Control&*


$37.99


Save BIG when you buy today!

Dbx 220I 2X2 Loudspeaker Management System With Display


Dbx 220I 2X2 Loudspeaker Management System With Display


$629.95


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 220i provides both system and microphone processing thanks to its full set of processing features and mic/line inputs. Click on the “View additional manufacturer information” link below to get the full scoop!Advanced feedback suppression (AFS) Graphic and parametric EQ Compressor Limiter Auto gain control Noise gating De-esser Ducker Bandpass filters 2×2 matrix mixer 1.3 seconds of delay RS-232 PC GUI control Mic/line inputs Wall panel control Security lockout

Dbx 215S Dual Channel 15-Band Graphic Equalizer


Dbx 215S Dual Channel 15-Band Graphic Equalizer


$179


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 215s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 215s includes two 15-band channels of 2/3-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 215s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 215s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. Dual 15-band, 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of 6 or 12 dB Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inpts and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB

Dbx Dbxzc9v Wall Mount Zone Volume Control&*


Dbx Dbxzc9v Wall Mount Zone Volume Control&*


$69


Save BIG when you buy today!

dbx iEQ-31 Graphic EQ


dbx iEQ-31 Graphic EQ


$554.36


dbx IEQ31 Dual 31 Band Graphic EQLimiter Visionary Design Besides including two 31-band channels of 13-octave equalization, the iEQ-31also offers 12 dB input gain range switchable 6 or 15 dB boostcut range,40mm faders, XLR, 14 and Euroblock inputs and outputs, nonconductivenylon sliders and an intuitive user interface with comprehensive output andgain reduction metering. As always, the inevitable result of our meticulousattention to detail and top-quality componentry is exceptional sound, performance,and reliability.Revolutionary Engineering The iEQ series represents a major step forward in the performance of graphicequalizers. The iEQ series is now able to offer state-of-the-art digital EQ performanceand specs with an analog look and feel. From its amazing 10Hz to22kHz frequency response, to its 113dB dynamic range and Advanced FeedbackSuppression AFS, dbx proprietary Type V noise reduction andPeakStopPlus limiting, the iEQ-31 offers out of this world specifications with adown-to-earth price point. Sure to find a home in the studio, on tour and withinstalled sound venues, the iEQ-31 is destined to take its rightful place in thelineage of great dbx signal processors that are the professionals choice in signalprocessing. With such pristine design and quality, the iEQ-31 offers the maximumsonic flexibility in a straight forward interface and rock-solid construction.Dual 15-band EQ AFS one-touch feedback suppression Type V noise reduction PeakStopPlus limiting Switchable 6 or 15dB boostcut range 12dB input gain range 40mm faders Nonconductive nylon sliders 10Hz to 22kHz frequency response 110dB dynamic range 13-octave Constant Q frequency bands Internal toroidal transformer 14 TRS, XLR, and Euroblock balanced and unbalanced RF-filtered inputs and outputs

dbx 223xs Stereo 2-Way/Mono 3-Way Crossover


dbx 223xs Stereo 2-Way/Mono 3-Way Crossover


$158.36


With the dbx 223xs Crossover youll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the worlds finest processors. The dbx 223xs Crossover uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality XLR inputs and outputs. XLR balanced ins and outs Mode switch for stereo 2-way or mono 3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant

dbx ZonePRO 641 m Speaker Processor


dbx ZonePRO 641 m Speaker Processor


$439.96


The ZonePRO 641m offers fixed IO, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 641m features a total of six inputs and four outputs. Inputs include four balanced micline switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable see table for further information. ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.6 Inputs 4 Outputs4 Balanced MicLine Inputs2 Unbalanced, Mono-Summed RCA Input PairsMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

dbx 234s Stereo 2/3 Way Mono 4-Way Crossover Regular 190839151650


dbx 234s Stereo 2/3 Way Mono 4-Way Crossover Regular 190839151650


$159.96


The dbx 234s Stereo 23 Way Mono 4-Way Crossover is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality 14 TRS inputs and outputs. The 234s uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234s leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. TRS differentially balanced ins and outs Mode switches for mono 4-way or stereo 2-way3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant Connectors 14 TRS Type Electronically balancedunbalanced, RF filtered Impedance Balanced >50k ohm, unbalanced >25k ohm Max Input Level >22dBu balanced or unbalanced CMRR >40dB, typically >50dB at 1kHz

Dog Personalized Throw, Color: Boxer by Fingerhut


Dog Personalized Throw, Color: Boxer by Fingerhut


$80.99


Personalized dog breed tapestry throw makes a wonderful gift for pet owners. Many breeds to choose from. Personalize with pet’s name (up to 12 characters). Fringed, woven 100% cotton for comfort Easy care; just machine wash Made in USA Personalized items cannot be returned unless defective. Please place orders carefully. Home > Domestics > Bedding > Blankets-Throws > Personalized. Bed & Bath > Bedding > Blankets & Throws.

Healthy Breeds Omega-3 Fatty Acids Skin/Coat 60-Ct, Color: Boxer by Fingerhut


Healthy Breeds Omega-3 Fatty Acids Skin/Coat 60-Ct, Color: Boxer by Fingerhut


$34.99


Includes 60 soft chews Helps support skin and coat health in dogs with food or environmental sensitivities as well as seasonal allergies Made in USA. Entertainment > Sports and Recreation > Pet Care > Dog > Feeding – Food Storage. Home > Pet Supplies > Dogs > Health & Grooming, Home > Pet Supplies > Dogs > Feeding & Treats.

Quad Base F18 4PLR CFL Light Bulb by GE (38876)


Quad Base F18 4PLR CFL Light Bulb by GE (38876)


$7.99


This compact-fluorescent bulb comes from the GE CFL collection. It has a quad plug-in base and a white overcoat on the glass. GE technical code is F18 DBX / SPX 27 / 4PLR. From GE, General Electric. Compact-fluorescent CFL bulb. F18 DBX / SPX 27 / 4PLR. From GE, General Electric. White overcoat on the glass. Light output of 1200 lumens. 2700K color temperature. Average lifespan of 12,000 hours. One bulb per pack. Price is for one light bulb.
Advertisement

Comments are closed.