Dbx 386 Dual Vacuum Tube Microphone Preamp With Digital Out

November 28th, 2011 by admin Leave a reply »

dbx goRack Performance Processor


dbx goRack Performance Processor


$29


A small and inexpensive speaker processor that will result in unprecedented performance from your existing powered speaker system. Based on dbxs DriveRack Series, the goRack provides Anti-Feedback, Compression, Sub-Harmonic Synth and EQ. Each processing function is enabled or disabled via top-level function buttons, and settings can be adjusted via goRack large data wheel.goRack rear panel features combination 14XLR inputs that can be connected to mixer outputs or to microphones directly. When using a mic, the goRacks MicLine switch selects the proper input sensitivity and gain range while dual gain controls on the top provide independent level adjustment. goRack 18 Aux input allows for direct connection of mobile music players while XLR outputs interface with powered speakers. The goRack is perfect for applications from a mixer, or with its dual XLR inputs and Aux input, it can be used as a standalone performance processormixer for the solo artist.Feedback supressionMake annoying and potentially painful audio feedback a thing of the past with the goRacks simple-to-use, Anti-Feedback processing. Based on dbxs industry-leading AFS Advanced Feedback Suppression algorithm, the goRack makes eliminating system feedback a snap. Simply press the goRacks Anti-Feedback function button and use the Data Wheel to adjust the settings. The goRack listens for, anticipates and removes feedback automatically without altering your sound.CompressionControl dynamics and fine-tune your system with the straightforward Compressor feature based on the legendary dbx 163 Compressor. Minimize peaks and level out variances in your audio source material with goRack intuitive Compressor feature.Sub-harmonic synthgoRacks Sub Synth feature is the perfect tool for adding extra bass to your system. For decades, dbxs patented Subharmonic Synthesis has been the secret weapon usCompact Form FactorAnti-Feedback Processing based on the dbx AFS Advanced Feedback Suppression algorithmdbx Compression based on the dbx 163Subharmonic SynthesisEQ 20 Musical Genre-Based 31-Band Graphic EQ SettingsDual dbx Microphone PreampLine InputsSelectable MicLine Input SettingsStereo Inputs and OutputsCombination MicLine Input Jacks and XLR Outputs18quot Stereo Aux Input for Mobile Music PlayersDevicesIndependent Left and Right Channel Volume Controls

dbx iEQ-31 Graphic EQ


dbx iEQ-31 Graphic EQ


$554.36


dbx IEQ31 Dual 31 Band Graphic EQLimiter Visionary Design Besides including two 31-band channels of 13-octave equalization, the iEQ-31also offers 12 dB input gain range switchable 6 or 15 dB boostcut range,40mm faders, XLR, 14 and Euroblock inputs and outputs, nonconductivenylon sliders and an intuitive user interface with comprehensive output andgain reduction metering. As always, the inevitable result of our meticulousattention to detail and top-quality componentry is exceptional sound, performance,and reliability.Revolutionary Engineering The iEQ series represents a major step forward in the performance of graphicequalizers. The iEQ series is now able to offer state-of-the-art digital EQ performanceand specs with an analog look and feel. From its amazing 10Hz to22kHz frequency response, to its 113dB dynamic range and Advanced FeedbackSuppression AFS, dbx proprietary Type V noise reduction andPeakStopPlus limiting, the iEQ-31 offers out of this world specifications with adown-to-earth price point. Sure to find a home in the studio, on tour and withinstalled sound venues, the iEQ-31 is destined to take its rightful place in thelineage of great dbx signal processors that are the professionals choice in signalprocessing. With such pristine design and quality, the iEQ-31 offers the maximumsonic flexibility in a straight forward interface and rock-solid construction.Dual 15-band EQ AFS one-touch feedback suppression Type V noise reduction PeakStopPlus limiting Switchable 6 or 15dB boostcut range 12dB input gain range 40mm faders Nonconductive nylon sliders 10Hz to 22kHz frequency response 110dB dynamic range 13-octave Constant Q frequency bands Internal toroidal transformer 14 TRS, XLR, and Euroblock balanced and unbalanced RF-filtered inputs and outputs

Tube-Tech MP2A Dual Mic Preamp and DI


Tube-Tech MP2A Dual Mic Preamp and DI


$3950


The MP 2A is a combined mic preampDI, based on a classic TUBE-TECH design, but featuring even higher fidelity and two primary new features An impedance switch to match the input perfectly to all types of microphones, and an overload indicator and 2 dB gain steps.MP2A is the second in the new range of upgraded microphone preamplifierDIs The modular PM1A was the first.nbspThese new preamps features even higher headroom and fidelity than the earlier TUBE-TECH micpres.nbspListening tests of the MP 2A reveal sound quality second to none, placing it among a handful of the worlds very best designs.The MP 2A DI continues the TUBE-TECH tradition of extremely good sounding DIs, delivering world class sound for bass and guitar DI recordings.Switchable 48 V phantom power, selectable mic impedance of 60012002400 OhmPhase reverse switch, low-cut filter 20 Hz40 Hzoff, as well as a switchable -20 dB padGain is adjustable from 10 dB to 70 dB. 10db steps, coarse 2 dB steps, fine.The Direct Instrument Input are unbalanced with a gain ranging from 10 dB to 60 dBInput transformer is enclosed in a MU-metal canInput and output transformers come with a static screen between the primary and secondary wiringsThe input and output are balanced as well as fully floatingAll-tube design featuring push-pull output amplifier

Tube-Tech Mp2a Dual Mic Preamp And Di


Tube-Tech Mp2a Dual Mic Preamp And Di


$3950


The MP 2A is a combined mic preamp/DI, based on a classic TUBE-TECH design, but featuring even higher fidelity and two primary new features: An impedance switch to match the input perfectly to all types of microphones, and an overload indicator and 2 dB gain steps.MP2A is the second in the new range of upgraded microphone preamplifier/DIs (The modular PM1A was the first). These new preamps features even higher headroom and fidelity than the earlier TUBE-TECH micpres. Listening tests of the MP 2A reveal sound quality second to none, placing it among a handful of the world’s very best designs.The MP 2A DI continues the TUBE-TECH tradition of extremely good sounding DIs, delivering world class sound for bass and guitar DI recordings.Switchable +48 V phantom power, selectable mic impedance of 600/1200/2400 OhmPhase reverse switch, low-cut filter (20 Hz/40 Hz/off), as well as a switchable -20 dB padGain is adjustable from +10 dB to +70 dB.( 10db steps, coarse +2 dB steps, fine.)The Direct Instrument Input are unbalanced with a gain ranging from + 10 dB to + 60 dBInput transformer is enclosed in a MU-metal canInput and output transformers come with a static screen between the primary and secondary wiringsThe input and output are balanced as well as fully floatingAll-tube design featuring push-pull output amplifier

dbx 166xs Dual Compressor Limiter


dbx 166xs Dual Compressor Limiter


$227.92


Adding a dbx 166xs CompressorLimiterGate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix – adding greater clarity and making them stand out from the surrounding instruments. To protect your expensive amps and speakers the PeakStop limiter provides an absolute ceiling for peak excursions or large transients that could damage your equipment. dbx knows compressors…after all they invented them The 166xs is the latest in a long line of the worlds most successful compressors from the inventors of the technology. Its patented Overeasy compression technology provides smooth and musical performance while the AutoDynamic attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 166xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 14 TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches. Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes New gate timing algorithms ensure the smoothest release characteristics Program-adaptive expandergates Great sounding dynamics control for any type of program material Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup Stereo or dual-mono operation Balanced inputs and outputs on 14quot TRS and XLR connectors Side Chain insert Classic dbx quotAutoquot mode

Dbx 166Xs Dual Compressor Limiter


Dbx 166Xs Dual Compressor Limiter


$259


Adding a dbx 166xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix – adding greater clarity and making them stand out from the surrounding instruments. To protect your expensive amps and speakers the PeakStop limiter provides an absolute ceiling for peak excursions or large transients that could damage your equipment. dbx knows compressors…after all they invented them! The 166xs is the latest in a long line of the world’s most successful compressors from the inventors of the technology. Its patented Overeasy compression technology provides smooth and musical performance while the AutoDynamic attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 166xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4″ TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches. Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes New gate timing algorithms ensure the smoothest release characteristics Program-adaptive expander/gates Great sounding dynamics control for any type of program material Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup Stereo or dual-mono operation Balanced inputs and outputs on 1/4″ TRS and XLR connectors Side Chain insert Classic dbx “Auto” mode

dbx 2231 Dual 31-Band Graphic Equalizer


dbx 2231 Dual 31-Band Graphic Equalizer


$466.36


2231 Dual 31 Band Graphic Equalizer Its amazing. One little button. It has so much effect. The Type III Noise Reduction is an entirely new concept… virtually instantaneous encodedecode within the circuitry of the box. dbx started out to build the finest EQs possible, boxes with the heritage and performance to rival the famous 30 Series EQs. And to no ones surprise they came out awfully darn good. Then came the crazy idea of putting this new noise reduction stuff in the box. Listen and be amazed. The EQs sound great without it, but with it the performance was nothing short of incredible. Check it out yourself and see.Dual-channel 31-bands 13-octave per band PeakPlus limiter LED bar graph for gain reduction and output level Status LEDs for all settings on the front panel XLR, barrier strip, and 14 connectors 45mm nylon sliders 12dB input gain stage

dbx 166xs Dual Compressor Limiter Regular 190839042880


dbx 166xs Dual Compressor Limiter Regular 190839042880


$148.77


Adding a dbx 166xs CompressorLimiterGate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix – adding greater clarity and making them stand out from the surrounding instruments. To protect your expensive amps and speakers the PeakStop limiter provides an absolute ceiling for peak excursions or large transients that could damage your equipment. dbx knows compressors…after all they invented them The 166xs is the latest in a long line of the worlds most successful compressors from the inventors of the technology. Its patented Overeasy compression technology provides smooth and musical performance while the AutoDynamic attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 166xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 14 TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches. Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes New gate timing algorithms ensure the smoothest release characteristics Program-adaptive expandergates Great sounding dynamics control for any type of program material Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup Stereo or dual-mono operation Balanced inputs and outputs on 14 TRS and XLR connectors Side Chain insert Classic dbx Auto mode

Tube-Tech Mec 1A Recording Channel


Tube-Tech Mec 1A Recording Channel


$4950


The rackmount Tube-Tech MEC 1A recording channel combines the MP 1A microphone and DI preamplifier, EQ 1A equalizer, and CL 1B optical compressor. It doesn’t get any better than that baby! The MEC 1A is designed and hand crafted to deliver the warmth of vintage quality recordings with unrivaled accuracy, purity, and realism. You couldn’t ask for a better front end for your DAW!Tube-Tech MEC 1A Recording Channel, First Take:All-tube channel strip comprising MP 1A preamp, EQ 1A equalizer, and CL 1B compressorMicrophone preamp: The microphone preamplifier consists of a microphone input transformer (with a static screen) with a step-up of +10 dB, two dual tube preamplifiers with two stepped gain switches, one with 10dB/step (coarse) and one 1dB/step (fine) giving a total gain range of +20dB to +70dB. The microphone input is provided with a switchable -20dB attenuation (PAD), switchable +48 V phantom-power and phase reverse. A highpass filter for the microphone and the DI input is switchable between off, 20 Hz and 40 Hz. For more information, check out the Tube-Tech MP 1A (# 182001)The microphone input is capable of accepting levels of up to +6 dBU (1.55V) at 40 Hz without the PAD. With the PAD switched into the circuit, the MEC 1A can be used as a unity gain line amplifier accepting levels up to +26 dBU (15.5V) at 40 Hz. The high impedance DI input is unbalanced and placed in the circuit directly after the input transformer. The gain range for this input is +10dB to +60dB. When in use, the microphone input is disabled. Equalizer: You’ll love the sound of this EQ. It performs exactly as you would want a high-end EQ to. With minimal tweaking, you can add all of the punch, polish, and air you like to make your recordings stand out. The equalizer features low and high shelving filter with a gain range of +/- 15dB, each with 6 switchable frequencies aTube based “All-in-one” recording channel+20 dB to +70 dB Gain mic preampPhantom Power (+48 V)Phase Reverse-20 dB padLowcut filterHigh-impedance DI-input (>1 Mohm) for direct connection of guitar, bass or keyboardThree band equalizer6 Low shelving frequency choices6 High shelving frequency choicesBell type Mid section with 12 switchable frequenciesVariable QSeparate in/out switchCompressor with optical gain reduction elementLinkable for stereo applicationsVariable Attack and Release parametersRatio 1.5:1 to 10:1Separate in/out switch

Dbx Zonepro 1261M Speaker Processor


Dbx Zonepro 1261M Speaker Processor


$749.95


The ZonePRO products have long been the obvious choice for managing commercial audio applications. They're easy to install and use – thanks to step-by-step setup wizards – and they're backed by long track record of dbx reliability. The fact that so many are in use in locations worldwide speaks to their popularity and dependable performance.<BR/><BR/>The ZonePRO 1261m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.<BR/><BR/>The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled<BR/>microphone gain allows adjustment of microphone gain per channel.<BR/><BR/>The 1261m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.<BR/><BR/>A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.<BR/><BR/>The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port.<BR/><BR/>Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.<BR/><BR/>All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).<BR/><BR/>ZonePRO Designer-the configuration, control and monito2 Inputs / 6 Outputs<BR/>6 Balanced Mic/Line Inputs<BR/>4 Unbalanced, Mono-Summed RCA Input Pairs<BR/>S/PDIF Input<BR/>Microphone Gain per Channel<BR/>Pre-Configured Architecture<BR/>Two Configurable Input Insert Positions<BR/>One Configurable Output Insert Position<BR/>AutoWarmth per Output Zone<BR/>Link Bus<BR/>Optional ZC Controllers<BR/>Ethernet Control<BR/>Serial Control<BR/>Third Party Control<BR/>Wizard-Driven Configuration<BR/>

Used Dbx Zonepro 1260M Speaker Processor


Used Dbx Zonepro 1260M Speaker Processor


$747.96


The ZonePRO 1260m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.12 Inputs / 6 Outputs6 Balanced Mic/Line Inputs4 Unbalanced, Mono-Summed RCA Input PairsS/PDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusComprehensive Signal MeteringFront Panel LCD9 User-Specified Front Panel ControlOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Zonepro 1260M Speaker Processor


Dbx Zonepro 1260M Speaker Processor


$849.95


The ZonePRO 1260m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.12 Inputs / 6 Outputs6 Balanced Mic/Line Inputs4 Unbalanced, Mono-Summed RCA Input PairsS/PDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusComprehensive Signal MeteringFront Panel LCD9 User-Specified Front Panel ControlOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

dbx ZonePRO 1260m Speaker Processor


dbx ZonePRO 1260m Speaker Processor


$747.96


The ZonePRO 1260m offers fixed IO, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced micline switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one SPDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable see table for further information.ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.12 Inputs 6 Outputs6 Balanced MicLine Inputs4 Unbalanced, Mono-Summed RCA Input PairsSPDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusComprehensive Signal MeteringFront Panel LCD9 User-Specified Front Panel ControlOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

dbx ZonePRO 1261m Speaker Processor


dbx ZonePRO 1261m Speaker Processor


$749.95


The ZonePRO products have long been the obvious choice for managing commercial audio applications. Theyre easy to install and use – thanks to step-by-step setup wizards – and theyre backed by long track record of dbx reliability. The fact that so many are in use in locations worldwide speaks to their popularity and dependable performance.The ZonePRO 1261m offers fixed IO, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced micline switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one SPDIF input for up to two digital channels. Hardware-controlledmicrophone gain allows adjustment of microphone gain per channel.The 1261m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable see table for further information.ZonePRO Designer-the configuration, control and monito2 Inputs 6 Outputs6 Balanced MicLine Inputs4 Unbalanced, Mono-Summed RCA Input PairsSPDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

dbx 266xs Compressor/Gate


dbx 266xs Compressor/Gate


$131.96


The dbx 266xs CompressorGate is the latest in a long line of the worlds most successful compressors from the inventors of the technology. Its patented Overeasy compression technology provides smooth and musical performance while the AutoDynamic attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 266xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 14 TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches. Adding a dbx 266xs CompressorLimiterGate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix – adding greater clarity and making them stand out from the surrounding instruments Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes New gate timing algorithms ensure the smoothest release characteristics Program-adaptive expandergates Great sounding dynamics control for any type of program material Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup Stereo or dual-mono operation Balanced inputs and outputs on 14quot TRS and XLR connectors Side Chain insert Classic dbx quotAutoquot mode

Dbx 266Xs Compressor/Gate


Dbx 266Xs Compressor/Gate


$169


The dbx 266xs Compressor/Gate is the latest in a long line of the world’s most successful compressors from the inventors of the technology. Its patented Overeasy compression technology provides smooth and musical performance while the AutoDynamic attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 266xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4″ TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches. Adding a dbx 266xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix – adding greater clarity and making them stand out from the surrounding instruments Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes New gate timing algorithms ensure the smoothest release characteristics Program-adaptive expander/gates Great sounding dynamics control for any type of program material Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup Stereo or dual-mono operation Balanced inputs and outputs on 1/4″ TRS and XLR connectors Side Chain insert Classic dbx “Auto” mode

dbx ZonePRO 1261m Speaker Processor  190839405210


dbx ZonePRO 1261m Speaker Processor 190839405210


$599.96


The ZonePRO products have long been the obvious choice for managing commercial audio applications. Theyre easy to install and use – thanks to step-by-step setup wizards – and theyre backed by long track record of dbx reliability. The fact that so many are in use in locations worldwide speaks to their popularity and dependable performance.The ZonePRO 1261m offers fixed IO, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced micline switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one SPDIF input for up to two digital channels. Hardware-controlledmicrophone gain allows adjustment of microphone gain per channel.The 1261m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable see table for further information.ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 1261m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1261m.2 Inputs 6 Outputs6 Balanced MicLine Inputs4 Unbalanced, Mono-Summed RCA Input PairsSPDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Used Dbx Zonepro 1261M Speaker Processor  190839405210


Used Dbx Zonepro 1261M Speaker Processor 190839405210


$599.96


The ZonePRO products have long been the obvious choice for managing commercial audio applications. They’re easy to install and use – thanks to step-by-step setup wizards – and they’re backed by long track record of dbx reliability. The fact that so many are in use in locations worldwide speaks to their popularity and dependable performance.The ZonePRO 1261m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlledmicrophone gain allows adjustment of microphone gain per channel.The 1261m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 1261m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1261m.2 Inputs / 6 Outputs6 Balanced Mic/Line Inputs4 Unbalanced, Mono-Summed RCA Input PairsS/PDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

dbx DriveRack PX Powered Speaker Optimizer


dbx DriveRack PX Powered Speaker Optimizer


$131.99


Powered speakers are beautiful things. Everything you need bundled into simple, tidy, portable packages. Just grab em and go, right Well, you may think your powered speaker system is complete, but youre missing half the picture. DriveRack PX is the other half. With the PX, dbx has created a processor specifically tailored for powered speakers. Utilizing dbxs highly acclaimed DriveRack technology, the PX picks up where your powered speakers leave off. The DriveRack PX Powered Speaker Optimizer has everything you need to get the most out of your stereo powered speaker system. It even includes stereo or mono subwoofer support. With the included dbx M2 measurement mic, Auto-EQ corrects for audible deficiencies in the room environment. Dbxs patented Advanced Feedback Suppression AFSTM kills nasty feedback, allowing problem-free operation at higher sound levels, while dbxs patented Subharmonic Synthesizer extends bass response for enhanced bottom end. With all that, you also get classic dbx compression and the protection offered by dbxs graceful PeakStopPlus limiting. Your ears, your audience, and your powered speakers will forever thank you. In spite of all that sophistication, rest assured dbx wont overcomplicate the simplicity of your rig. Dbxs exclusive Setup, Auto-EQ, AFS Wizards, and out-of-the-box support for a host of JBL and other popular powered speakers, make setup a snap. Louder, cleaner, better sound than you thought possible from your powered speakers.Stereo feedback elimination with 12 feedback notch filters Dual 28-band graphic EQ Classic dbx Compressor 120A subharmonic synthesizer Stereo multi-band parametric EQ Stereo PeakStopPlus limiters Pink noise generator Auto-EQ with 28-band RTA JBL and other popular powered speakers included in Setup Wizard dbx M2 measurement mic and zippered pouch included Front panel RTA-Mic XLR inputwith phantom power 25 user programs 25 factory programs 2-channel XLR Input 2-channel XLR Output 2-channel XLR Sub Output 24-bit ADC24-bit DAC, >110 dB dynamic range dbx Type IVTM conversion system Full graphic LCD display

Dbx 560A 500 Series Compressor / Limiter


Dbx 560A 500 Series Compressor / Limiter


$199.95


The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to the 900 Series and the 560A continues that tradition.Featuring the same switch-selectable OverEasy and Hard Knee compression curves as the industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! Its also versatile enough to go from subtle compression to “brick wall” peak limiting.Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560A’s Hard Knee compression and high ratios for bombproof protection against overload distortion in digital recording, P.A. systems and broadcast signals.The 560A’s 19-segment, switchable Input/Output LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the dbx 560A’s unique “INFINITY +” inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway mix levels.OverEasy or classic hard knee compression with dbx’ ultra-musical program dependent attack and release timesCompression ratio variable from 1:1 through infinity:1 to -1:1Precise RMS gain reduction and input/output meter displays with calibration control for different operating levelsTrue RMS level detectionExclusive Infinity+ compression using negative ratios

Dbx 786 Microphone Preamp


Dbx 786 Microphone Preamp


$1199.99


Save BIG when you buy today!

DM529BT 6.2 in. Double Din LCD Screen Mechless with Bluetooth


DM529BT 6.2 in. Double Din LCD Screen Mechless with Bluetooth


$94.89


This Digital media receiver features a 6.2 digital LED backlit high-definition LCD TFT display. It also features built-in Bluetooth AM / FM Tuner, 7 - EQ presets, microsSD Card , USB with 1A charge and 3.5mm inputs . Features Digital Media Receiver 6.2" LCD Display Built-in Bluetooth7 EQ PresetsmicroSD Card Input200W Peak PowerBalanced InputsSpecificationsChassis Size: 2.0 DINScreen Type: Digital LED Backlit TFT DisplayMonitor Size: 6.2"Screen Resolution: 800 x 480Touchscreen: YesPeak Power Output: 200 Watts (50 Watts x 4)RMS Power Output: 16 Watts x 4CEA 2006 Compliant: YesRCA Preamp Outputs: 2 Pairs (Front, Rear)Preamp Voltage: 2 volts RMSSize: 6.2 in.Dimension: 8.5 L x 8.5 H x 5.25 W in.Weight: 2.1 lbs

Dual Electronics Dual Electronics 1-Din Multimedia Dvd Receiver with 7-inch Flip-out Touch Screen Usb/sd Reader - All


Dual Electronics Dual Electronics 1-Din Multimedia Dvd Receiver with 7-inch Flip-out Touch Screen Usb/sd Reader – All


$186.65


7 touchscreen motorized Single DIN CD/DVD receiver with 240 watts; offers direct control for iPod and iPhone devices as well as supports MP3/WMA playback from micro SD cards and USB devices. A dedicated video output and a rear camera input allow for system expansion. In-Dash AM/FM, CD, MP3, USB Receiver with Remote Full-color 7 LCD touchscreen display 2-way iPod control allows control from the iPod or the stereo Blue illuminated button lighting CEA-2006 compliant amplifier Power Output Peak 60 watts x 4 channels RMS 18 watts x 4 channels Theft-deterrent, detachable face plate Wireless remote control included CD text information display MP3 ID3 Tag Display Title/Artist/Album Playback of DVD, DVD-R, DVD-RW, CD, CD-R, CD-RW, MP3, JPG and WMA Playback of region #1 DVD discs AM/FM tuner with 24FM/12AM presets Electronic Shock Protection ESP 2-band parametric equalizer 3 Sets of 2V preamp outputs front, rear and mono subwoofer Front USB Input USB port allows connection to digital devices such as flash drives, portable media players, etc. Dedicated Backup Camera Input Used for universal rear view cameras with an RCA composite input Rear RCA Audio/Video Input Used for connecting video accessories such as game consoles, video cameras, etc. 2 Rear RCA Video Outputs Used for connection to separate monitors and devices Features AM/FM/CD/DVD Receiver Direct Control for iPod and iPhone 30 pin Apple connector Cable included ** DVD-/ R/RW compatible Region 1 DVD playback CD-R/RW compatible MP3/WMA/JPG playback Digital TFT display 800 x 480 Long-life LED backlighting Detachable front panel Front panel USB 2.0 input ** 2-Band audio adjustment Bass/Treble Front panel auxiliary A/V input 3.5mm to connect iPod/iPhone, video accessories such as game consoles, MP3 players, etc. Front panel SD card input supports SDHC up to 32GB ** 1 Rear audio/video input RCA 2 pairs of audio preamp outputs F/R 1 Subwoofer output RCA 2 Composite video outputs RCA 1 Rear camera input RCA Wireless Remote Control * Some recordable CDs and DVDs may be incompatible with this unit, depending on media type and recording method. ** Due to ongoing technological advancement, some devices me be incompatible with this unit.

Dbx 1215 Dual 15-Band Graphic Equalizer


Dbx 1215 Dual 15-Band Graphic Equalizer


$289


Designed for use in the most demanding live situations, the dbx 1215 Dual 15-Band Graphic Equalizer provides dual channels, 15 – 2/3-octave bands, ISO frequency centers, 12dB input gain range, and switchable 40Hz/18dB per octave low-cut filters. Other quality features of the dbx 1215 EQ include 45mm faders; selectable 6dB or 15dB boost/cut range; XLR, barrier strip, and 1/4″ TRS connectors; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation.Switchable boost/cut range between 6dB and 15dB Electronically balanced/unbalanced inputs Servo balanced/unbalanced outputs RF filtered inputs and outputs XLR, barrier strip, and 1/4″ TRS connectors -12dB/+12dB input gain range 18dB/octave 40Hz Bessel low-cut filter Chassis/signal ground lift capability Internal power supply transformer Power-off hardwire relay bypass with 2-second power-up delay

dbx 1215 Dual 15-Band Graphic Equalizer


dbx 1215 Dual 15-Band Graphic Equalizer


$228.76


Designed for use in the most demanding live situations, the dbx 1215 Dual 15-Band Graphic Equalizer provides dual channels, 15 – 23-octave bands, ISO frequency centers, 12dB input gain range, and switchable 40Hz18dB per octave low-cut filters. Other quality features of the dbx 1215 EQ include 45mm faders selectable 6dB or 15dB boostcut range XLR, barrier strip, and 14 TRS connectors balanced inputs and outputs for quiet operation and chassissignal ground lift capabilities for quick hum isolation.Switchable boostcut range between 6dB and 15dB Electronically balancedunbalanced inputs Servo balancedunbalanced outputs RF filtered inputs and outputs XLR, barrier strip, and 14quot TRS connectors -12dB12dB input gain range 18dBoctave 40Hz Bessel low-cut filter Chassissignal ground lift capability Internal power supply transformer Power-off hardwire relay bypass with 2-second power-up delay

Dbx 2231 Dual 31-Band Graphic Equalizer


Dbx 2231 Dual 31-Band Graphic Equalizer


$569


The dbx 2231 Dual 31-Band Graphic Equalizer gives you 2 channels with 31 bands, each 1/3 octave to achieve the most precise tone control you can get. The dbx 2231 equalizer combines a superb EQ circuit, a powerful limiter, and revolutionary Type III noise reduction that increases S/N ratio by 20dB. The PeakPlus limiter’s threshold ranges from 0dBu to +20dBu and can transparently tame the wildest hits or subtlest nuances of any signal. A 4-segment LED bar graph for both gain reduction and output level offers the most comprehensive visual feedback available. XLR, barrier strip, and 1/4″ connectors; 45mm nylon sliders; and 12dB input gain stage provide pro flexibility and performance. dbx also includes status LEDs for all settings on the front panel of the 2231 Dual Graphic Equalizer.Dual-channel 31-bands 1/3-octave per band PeakPlus limiter LED bar graph for gain reduction and output level Status LEDs for all settings on the front panel XLR, barrier strip, and 1/4″ connectors 45mm nylon sliders 12dB input gain stage

Dbx 231S Dual Channel 31-Band Graphic Equalizer


Dbx 231S Dual Channel 31-Band Graphic Equalizer


$219


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 231s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. <BR/> <BR/>The dbx 231s includes two 31-band channels of 1/3-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 231s offers exceptional sound and rugged reliability that guarantees you will always sound your best. <BR/> <BR/>Sure to find a home in the studio, on tour and with installed sound venues, the dbx 231s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional's choice in signal processing. With such affordable quality, there's no longer any excuse for compromising your sound. <BR/><ul><li>Dual 31-band, 1/3-octave Constant Q frequency bands </li><li>Switchable boost/cut ranges of 6 or 12 dB </li><li>Front panel bypass switch </li><li>12 dB input gain range </li><li>4-segment LED ladders for monitoring output levels </li><li>XLR and TRS Inpts and Outputs </li><li>Frequency Repsonse of <10Hz to >50kHz </li><li>Dynamic range of greater than 108dB </li></ul>
Advertisement

Comments are closed.