DBX 286A Microphone Processor

May 3rd, 2011 by admin Leave a reply »

DBX 286s Microphone Pre-amp Processor - White


DBX 286s Microphone Pre-amp Processor – White


$219


Microphone Pre-amp Processor

dbx goRack Performance Processor


dbx goRack Performance Processor


$29


A small and inexpensive speaker processor that will result in unprecedented performance from your existing powered speaker system. Based on dbxs DriveRack Series, the goRack provides Anti-Feedback, Compression, Sub-Harmonic Synth and EQ. Each processing function is enabled or disabled via top-level function buttons, and settings can be adjusted via goRack large data wheel.goRack rear panel features combination 14XLR inputs that can be connected to mixer outputs or to microphones directly. When using a mic, the goRacks MicLine switch selects the proper input sensitivity and gain range while dual gain controls on the top provide independent level adjustment. goRack 18 Aux input allows for direct connection of mobile music players while XLR outputs interface with powered speakers. The goRack is perfect for applications from a mixer, or with its dual XLR inputs and Aux input, it can be used as a standalone performance processormixer for the solo artist.Feedback supressionMake annoying and potentially painful audio feedback a thing of the past with the goRacks simple-to-use, Anti-Feedback processing. Based on dbxs industry-leading AFS Advanced Feedback Suppression algorithm, the goRack makes eliminating system feedback a snap. Simply press the goRacks Anti-Feedback function button and use the Data Wheel to adjust the settings. The goRack listens for, anticipates and removes feedback automatically without altering your sound.CompressionControl dynamics and fine-tune your system with the straightforward Compressor feature based on the legendary dbx 163 Compressor. Minimize peaks and level out variances in your audio source material with goRack intuitive Compressor feature.Sub-harmonic synthgoRacks Sub Synth feature is the perfect tool for adding extra bass to your system. For decades, dbxs patented Subharmonic Synthesis has been the secret weapon usCompact Form FactorAnti-Feedback Processing based on the dbx AFS Advanced Feedback Suppression algorithmdbx Compression based on the dbx 163Subharmonic SynthesisEQ 20 Musical Genre-Based 31-Band Graphic EQ SettingsDual dbx Microphone PreampLine InputsSelectable MicLine Input SettingsStereo Inputs and OutputsCombination MicLine Input Jacks and XLR Outputs18quot Stereo Aux Input for Mobile Music PlayersDevicesIndependent Left and Right Channel Volume Controls

dbx ZonePRO 1260m Speaker Processor


dbx ZonePRO 1260m Speaker Processor


$747.96


The ZonePRO 1260m offers fixed IO, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced micline switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one SPDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable see table for further information.ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.12 Inputs 6 Outputs6 Balanced MicLine Inputs4 Unbalanced, Mono-Summed RCA Input PairsSPDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusComprehensive Signal MeteringFront Panel LCD9 User-Specified Front Panel ControlOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Zonepro 1260M Speaker Processor


Dbx Zonepro 1260M Speaker Processor


$929


The ZonePRO 1260m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.12 Inputs / 6 Outputs6 Balanced Mic/Line Inputs4 Unbalanced, Mono-Summed RCA Input PairsS/PDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusComprehensive Signal MeteringFront Panel LCD9 User-Specified Front Panel ControlOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Zonepro 640 Speaker Processor


Dbx Zonepro 640 Speaker Processor


$599


With 6 inputs and 4 outputs the dbx ZonePRO 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.Designed to offer superior system sonic performance and flexibility, the 640/641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.Beyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoringAdvanced Feedback Suppression (AFS)AutowarmthAuto Gain ControlCompressionLimitingNoise GatingNotch FilteringBandpass and Crossover FiltersParametric EQSecurity LockoutWall Panel ControlRS-232 ControlWindows 2000 and XP GUIIEC, UL and CSA Approvals

Dbx Zonepro 1261M Speaker Processor


Dbx Zonepro 1261M Speaker Processor


$749.95


The ZonePRO products have long been the obvious choice for managing commercial audio applications. They’re easy to install and use – thanks to step-by-step setup wizards – and they’re backed by long track record of dbx reliability. The fact that so many are in use in locations worldwide speaks to their popularity and dependable performance.The ZonePRO 1261m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlledmicrophone gain allows adjustment of microphone gain per channel.The 1261m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).ZonePRO Designer-the configuration, control and monito2 Inputs / 6 Outputs6 Balanced Mic/Line Inputs4 Unbalanced, Mono-Summed RCA Input PairsS/PDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Zonepro 641 M Speaker Processor


Dbx Zonepro 641 M Speaker Processor


$499.95


The ZonePRO 641m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.<BR/><BR/>The 641m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.<BR/><BR/>The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.<BR/><BR/>A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.<BR/><BR/>The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.<BR/><BR/>Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.<BR/><BR/>All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information). ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.6 Inputs / 4 Outputs<BR/>4 Balanced Mic/Line Inputs<BR/>2 Unbalanced, Mono-Summed RCA Input Pairs<BR/>Microphone Gain per Channel<BR/>Pre-Configured Architecture<BR/>Two Configurable Input Insert Positions<BR/>One Configurable Output Insert Position<BR/>AutoWarmth per Output Zone<BR/>Link Bus<BR/>Optional ZC Controllers<BR/>Ethernet Control<BR/>Serial Control<BR/>Third Party Control<BR/>Wizard-Driven Configuration<BR/>

dbx ZonePRO 641 m Speaker Processor


dbx ZonePRO 641 m Speaker Processor


$439.96


The ZonePRO 641m offers fixed IO, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 641m features a total of six inputs and four outputs. Inputs include four balanced micline switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable see table for further information. ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.6 Inputs 4 Outputs4 Balanced MicLine Inputs2 Unbalanced, Mono-Summed RCA Input PairsMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

dbx ZonePRO 640 Speaker Processor  888365966595


dbx ZonePRO 640 Speaker Processor 888365966595


$439.96


With 6 inputs and 4 outputs the dbx ZonePRO 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.Designed to offer superior system sonic performance and flexibility, the 640641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.Beyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoring the ZonePRO Designer software provides an intuitive interface and a speedy setup Wizard for configuring and editing all system parameters.The ZonePRO 640 will take your Commercial Audio system to the next level with advanced processing, versatility and control.Advanced Feedback Suppression AFSAutowarmthAuto Gain ControlCompressionLimitingNoise GatingNotch FilteringBandpass and Crossover FiltersParametric EQSecurity LockoutWall Panel ControlRS-232 ControlWindows 2000 and XP GUIIEC, UL and CSA Approvals

Dbx Single Channel Strip With Compressor/Expander/Gate/De-Esser/Enhancer


Dbx Single Channel Strip With Compressor/Expander/Gate/De-Esser/Enhancer


$199.95


The dbx 286s is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. Why mic up vocals and instruments through a noisy, blurry mixer? The sonically pristine dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy compressor to transparently smooth out uneven acoustic tracks or deliver that classic “in your face” vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps.

Dbx Driverack 220I Signal Processor


Dbx Driverack 220I Signal Processor


$149.99


Save BIG when you buy today!

Dbx A-256 Signal Processor


Dbx A-256 Signal Processor


$49.99


Save BIG when you buy today!

Dbx Rta-M Dynamic Microphone


Dbx Rta-M Dynamic Microphone


$55.99


Used Dbx RTA-M Dynamic Microphone.

Dbx Driverack Eq Combo W Power Supply Signal Processor


Dbx Driverack Eq Combo W Power Supply Signal Processor


$924.99


DRIVERACK 481 EQ & LOUDSPEAKER W/480 P REMOTE POWER SYSTEM.

dbx RTA-M Reference Microphone for DriveRack PA


dbx RTA-M Reference Microphone for DriveRack PA


$87.96


Omni-directional, flat frequency, measurement mic. Requires phantom power.

Dbx Rta-M Reference Microphone For Driverack Pa


Dbx Rta-M Reference Microphone For Driverack Pa


$99.95


Omni-directional, flat frequency, measurement mic. <BR/>Requires phantom power.

Used Dbx Rta-M Reference Microphone For Driverack Pa


Used Dbx Rta-M Reference Microphone For Driverack Pa


$87.96


Omni-directional, flat frequency, measurement mic. Requires phantom power.

Dbx Drive Rack 260 With Rta-M Reference Mic


Dbx Drive Rack 260 With Rta-M Reference Mic


$738.95


The DriveRack 260 with RTA-M Reference Microphone includes the DriveRack 260 Complete Equalization and Loudspeaker Management System and the DBX RTA-M Reference Microphone. The 260 DriveRack essentially becomes the only device that you will need between the mixer and the power amps. DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application.DriveRack 260 DriveRack 260 Complete Equalization and Loudspeaker Management SystemThe DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI software control provides easy PC-based control.RTA-M Reference MicrophoneThe DBX RTA-M Reference Microphone is omnidirectional, and has a flat frequency response, making it ideal an a measurement microphone. The RTA-M was designed to work with the DBX DriveRack Loudspeaker Management Systems for feedback elimination in venues and studios.Feedback elimination2.7 seconds of alignment and zone delayRS-232 PC GUI Software Interface controlClassic dbx compression and limitingGraphic and parametric EQsAuto-EQ functionFull bandpass, crossover, and routing configurationsAuto gain controlPink noise generator and fulltime RTASetup wizard with JBL speaker and Crown power amplifier tuningsSecurity lockoutWall panel control inputs for permanent installations

Dbx 220I 2X2 Loudspeaker Management System With Display


Dbx 220I 2X2 Loudspeaker Management System With Display


$629.95


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 220i provides both system and microphone processing thanks to its full set of processing features and mic/line inputs. Click on the “View additional manufacturer information” link below to get the full scoop!Advanced feedback suppression (AFS) Graphic and parametric EQ Compressor Limiter Auto gain control Noise gating De-esser Ducker Bandpass filters 2×2 matrix mixer 1.3 seconds of delay RS-232 PC GUI control Mic/line inputs Wall panel control Security lockout

Dbx Di1 Active Direct Box


Dbx Di1 Active Direct Box


$109


The dbx DI1 is a compact, high-quality active direct injection box. Ideal for both studios and on the road, the DI1 will ensure audio signals reach their intended destination in both a balanced format and free from unwanted noise.Connect the output from electric guitars, bass amplifiers, keyboards, etc, directly to a console mixer without the use of a microphone. Built for toughness and reliability, the DI1 has all the features of a fully featured gig-ready workhorse DI unit.Level and impedance matching functionOutput impedance: > 600 OhmsSignal pass through connectorOutput connector: XLR balancedBattery LED indicatorDistortion: (THD) < 0.005% at 1kHz, 0dBuPhantom power led indicatorMax Input: +12dBu (at 0dB) Level +32dBu (at -20dB) +52dBu (at -40dB)Output Noise: <-100dB unweightedTS and XLR inputs and outputsFrequency response: 10Hz to 70kHz, +0dB/-3dBAttenuation controlPhantom Power: +18 volts DC to +48 volts DCGround lift switchMain/Standby: 9V batteryInput Impedance: >250k OhmMetal Chassis

Dbx 560A 500 Series Compressor / Limiter


Dbx 560A 500 Series Compressor / Limiter


$199.95


The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to the 900 Series and the 560A continues that tradition.Featuring the same switch-selectable OverEasy and Hard Knee compression curves as the industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! Its also versatile enough to go from subtle compression to “brick wall” peak limiting.Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560A’s Hard Knee compression and high ratios for bombproof protection against overload distortion in digital recording, P.A. systems and broadcast signals.The 560A’s 19-segment, switchable Input/Output LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the dbx 560A’s unique “INFINITY +” inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway mix levels.OverEasy or classic hard knee compression with dbx’ ultra-musical program dependent attack and release timesCompression ratio variable from 1:1 through infinity:1 to -1:1Precise RMS gain reduction and input/output meter displays with calibration control for different operating levelsTrue RMS level detectionExclusive Infinity+ compression using negative ratios

dbx Single Channel Strip With Compressor/Expander/Gate/De-esser/Enhancer


dbx Single Channel Strip With Compressor/Expander/Gate/De-esser/Enhancer


$199.95


The dbx 286s is a full featured Channel Strip Processor that delivers a studio quality microphoneinstrument preamplifier and four processors that can be used independently or in any combination. Why mic up vocals and instruments through a noisy, blurry mixer The sonically pristine dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable 48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy compressor to transparently smooth out uneven acoustic tracks or deliver that classic in your face vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the ExpanderGate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps.

dbx DriveRack PX Powered Speaker Optimizer


dbx DriveRack PX Powered Speaker Optimizer


$131.99


Powered speakers are beautiful things. Everything you need bundled into simple, tidy, portable packages. Just grab em and go, right Well, you may think your powered speaker system is complete, but youre missing half the picture. DriveRack PX is the other half. With the PX, dbx has created a processor specifically tailored for powered speakers. Utilizing dbxs highly acclaimed DriveRack technology, the PX picks up where your powered speakers leave off. The DriveRack PX Powered Speaker Optimizer has everything you need to get the most out of your stereo powered speaker system. It even includes stereo or mono subwoofer support. With the included dbx M2 measurement mic, Auto-EQ corrects for audible deficiencies in the room environment. Dbxs patented Advanced Feedback Suppression AFSTM kills nasty feedback, allowing problem-free operation at higher sound levels, while dbxs patented Subharmonic Synthesizer extends bass response for enhanced bottom end. With all that, you also get classic dbx compression and the protection offered by dbxs graceful PeakStopPlus limiting. Your ears, your audience, and your powered speakers will forever thank you. In spite of all that sophistication, rest assured dbx wont overcomplicate the simplicity of your rig. Dbxs exclusive Setup, Auto-EQ, AFS Wizards, and out-of-the-box support for a host of JBL and other popular powered speakers, make setup a snap. Louder, cleaner, better sound than you thought possible from your powered speakers.Stereo feedback elimination with 12 feedback notch filters Dual 28-band graphic EQ Classic dbx Compressor 120A subharmonic synthesizer Stereo multi-band parametric EQ Stereo PeakStopPlus limiters Pink noise generator Auto-EQ with 28-band RTA JBL and other popular powered speakers included in Setup Wizard dbx M2 measurement mic and zippered pouch included Front panel RTA-Mic XLR inputwith phantom power 25 user programs 25 factory programs 2-channel XLR Input 2-channel XLR Output 2-channel XLR Sub Output 24-bit ADC24-bit DAC, >110 dB dynamic range dbx Type IVTM conversion system Full graphic LCD display

Dbx 1215 Dual 15-Band Graphic Equalizer


Dbx 1215 Dual 15-Band Graphic Equalizer


$289


Designed for use in the most demanding live situations, the dbx 1215 Dual 15-Band Graphic Equalizer provides dual channels, 15 – 2/3-octave bands, ISO frequency centers, 12dB input gain range, and switchable 40Hz/18dB per octave low-cut filters. Other quality features of the dbx 1215 EQ include 45mm faders; selectable 6dB or 15dB boost/cut range; XLR, barrier strip, and 1/4″ TRS connectors; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation.Switchable boost/cut range between 6dB and 15dB Electronically balanced/unbalanced inputs Servo balanced/unbalanced outputs RF filtered inputs and outputs XLR, barrier strip, and 1/4″ TRS connectors -12dB/+12dB input gain range 18dB/octave 40Hz Bessel low-cut filter Chassis/signal ground lift capability Internal power supply transformer Power-off hardwire relay bypass with 2-second power-up delay

Dbx 215S Dual Channel 15-Band Graphic Equalizer


Dbx 215S Dual Channel 15-Band Graphic Equalizer


$179


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 215s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 215s includes two 15-band channels of 2/3-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 215s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 215s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. Dual 15-band, 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of 6 or 12 dB Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inpts and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB
Advertisement

Comments are closed.