Dbx 286A Microphone Preamp Processor Standard

November 16th, 2010 by admin Leave a reply »

Dbx Zonepro 640 Speaker Processor


Dbx Zonepro 640 Speaker Processor


$599


With 6 inputs and 4 outputs the dbx ZonePRO 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.Designed to offer superior system sonic performance and flexibility, the 640/641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications; there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.Beyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoringAdvanced Feedback Suppression (AFS)AutowarmthAuto Gain ControlCompressionLimitingNoise GatingNotch FilteringBandpass and Crossover FiltersParametric EQSecurity LockoutWall Panel ControlRS-232 ControlWindows 2000 and XP GUIIEC, UL and CSA Approvals

dbx ZonePRO 640 Speaker Processor  888365966595


dbx ZonePRO 640 Speaker Processor 888365966595


$439.96


With 6 inputs and 4 outputs the dbx ZonePRO 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications.Designed to offer superior system sonic performance and flexibility, the 640641 deliver the highest quality tools available. Even the input and outputs connectors were chosen for their standard usage and reliability. The ZonePRO products offer Euroblock connectors for balanced signals and RCA connectors for interfacing with consumer equipment often used in commercial applications there is also a simple analog input buss that allows inputs to be sent from one unit to the next for unit and job scalability. The 640 and 641 provide every necessary processing tool, from the input processing like gain control and EQ available on all inputs to highly sophisticated and specific functions such as selectable paging microphone processing including Gating, De-Essing, Auto Gain Control, Compression and Feedback Suppression. The heart of the ZonePRO products is the Routing module that provides of course Primary Source Selection but also Source Ducking for Paging and Priority Override. The outputs also offer a wealth of processing designed for commercial applications like our patent-pending AutoWarmth function that was co-developed with JBL to provide natural low frequency extension at any signal level. Each output also offers EQ, Bandpass and Crossover filters, Limiting and Delay for system optimization. With the ZonePRO every tool is at your disposal to maximize the response of your system.Beyond processing, the ZonePRO products offer multiple forms of control to further extend the versatility of your system. From easy-to-use wall panel Zone Controllers for standard end-user functions like source select and volume control to advanced system control including a built-in Real Time Clock that can provide programmable system changes throughout the day or week. For system setup and monitoring the ZonePRO Designer software provides an intuitive interface and a speedy setup Wizard for configuring and editing all system parameters.The ZonePRO 640 will take your Commercial Audio system to the next level with advanced processing, versatility and control.Advanced Feedback Suppression AFSAutowarmthAuto Gain ControlCompressionLimitingNoise GatingNotch FilteringBandpass and Crossover FiltersParametric EQSecurity LockoutWall Panel ControlRS-232 ControlWindows 2000 and XP GUIIEC, UL and CSA Approvals

Dbx Single Channel Strip With Compressor/Expander/Gate/De-Esser/Enhancer


Dbx Single Channel Strip With Compressor/Expander/Gate/De-Esser/Enhancer


$199.95


The dbx 286s is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. Why mic up vocals and instruments through a noisy, blurry mixer? The sonically pristine dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy compressor to transparently smooth out uneven acoustic tracks or deliver that classic “in your face” vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps.

Used Dbx Single Channel Strip With Compressor/Expander/Gate/De-Esser/Enhancer


Used Dbx Single Channel Strip With Compressor/Expander/Gate/De-Esser/Enhancer


$175.96


The dbx 286s is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. Why mic up vocals and instruments through a noisy, blurry mixer? The sonically pristine dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy compressor to transparently smooth out uneven acoustic tracks or deliver that classic “in your face” vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps.

DBX 286s Microphone Pre-amp Processor - White


DBX 286s Microphone Pre-amp Processor – White


$219


Microphone Pre-amp Processor

DBX 676 Tube Microphone Preamp Channel Strip - Black


DBX 676 Tube Microphone Preamp Channel Strip – Black


$999.95


Tube Microphone Preamp Channel Strip

dbx goRack Performance Processor


dbx goRack Performance Processor


$29


A small and inexpensive speaker processor that will result in unprecedented performance from your existing powered speaker system. Based on dbxs DriveRack Series, the goRack provides Anti-Feedback, Compression, Sub-Harmonic Synth and EQ. Each processing function is enabled or disabled via top-level function buttons, and settings can be adjusted via goRack large data wheel.goRack rear panel features combination 14XLR inputs that can be connected to mixer outputs or to microphones directly. When using a mic, the goRacks MicLine switch selects the proper input sensitivity and gain range while dual gain controls on the top provide independent level adjustment. goRack 18 Aux input allows for direct connection of mobile music players while XLR outputs interface with powered speakers. The goRack is perfect for applications from a mixer, or with its dual XLR inputs and Aux input, it can be used as a standalone performance processormixer for the solo artist.Feedback supressionMake annoying and potentially painful audio feedback a thing of the past with the goRacks simple-to-use, Anti-Feedback processing. Based on dbxs industry-leading AFS Advanced Feedback Suppression algorithm, the goRack makes eliminating system feedback a snap. Simply press the goRacks Anti-Feedback function button and use the Data Wheel to adjust the settings. The goRack listens for, anticipates and removes feedback automatically without altering your sound.CompressionControl dynamics and fine-tune your system with the straightforward Compressor feature based on the legendary dbx 163 Compressor. Minimize peaks and level out variances in your audio source material with goRack intuitive Compressor feature.Sub-harmonic synthgoRacks Sub Synth feature is the perfect tool for adding extra bass to your system. For decades, dbxs patented Subharmonic Synthesis has been the secret weapon usCompact Form FactorAnti-Feedback Processing based on the dbx AFS Advanced Feedback Suppression algorithmdbx Compression based on the dbx 163Subharmonic SynthesisEQ 20 Musical Genre-Based 31-Band Graphic EQ SettingsDual dbx Microphone PreampLine InputsSelectable MicLine Input SettingsStereo Inputs and OutputsCombination MicLine Input Jacks and XLR Outputs18quot Stereo Aux Input for Mobile Music PlayersDevicesIndependent Left and Right Channel Volume Controls

dbx ZonePRO 1260m Speaker Processor


dbx ZonePRO 1260m Speaker Processor


$747.96


The ZonePRO 1260m offers fixed IO, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced micline switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one SPDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable see table for further information.ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.12 Inputs 6 Outputs6 Balanced MicLine Inputs4 Unbalanced, Mono-Summed RCA Input PairsSPDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusComprehensive Signal MeteringFront Panel LCD9 User-Specified Front Panel ControlOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Zonepro 1260M Speaker Processor


Dbx Zonepro 1260M Speaker Processor


$929


The ZonePRO 1260m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.12 Inputs / 6 Outputs6 Balanced Mic/Line Inputs4 Unbalanced, Mono-Summed RCA Input PairsS/PDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusComprehensive Signal MeteringFront Panel LCD9 User-Specified Front Panel ControlOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Zonepro 1261M Speaker Processor


Dbx Zonepro 1261M Speaker Processor


$749.95


The ZonePRO products have long been the obvious choice for managing commercial audio applications. They're easy to install and use – thanks to step-by-step setup wizards – and they're backed by long track record of dbx reliability. The fact that so many are in use in locations worldwide speaks to their popularity and dependable performance.<BR/><BR/>The ZonePRO 1261m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.<BR/><BR/>The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled<BR/>microphone gain allows adjustment of microphone gain per channel.<BR/><BR/>The 1261m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.<BR/><BR/>A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.<BR/><BR/>The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port.<BR/><BR/>Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.<BR/><BR/>All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).<BR/><BR/>ZonePRO Designer-the configuration, control and monito<ul><li>2 Inputs / 6 Outputs</li><li>6 Balanced Mic/Line Inputs</li><li>4 Unbalanced, Mono-Summed RCA Input Pairs</li><li>S/PDIF Input</li><li>Microphone Gain per Channel</li><li>Pre-Configured Architecture</li><li>Two Configurable Input Insert Positions</li><li>One Configurable Output Insert Position</li><li>AutoWarmth per Output Zone</li><li>Link Bus</li><li>Optional ZC Controllers</li><li>Ethernet Control</li><li>Serial Control</li><li>Third Party Control</li><li>Wizard-Driven Configuration</li></ul>

dbx ZonePRO 641 m Speaker Processor


dbx ZonePRO 641 m Speaker Processor


$439.96


The ZonePRO 641m offers fixed IO, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 641m features a total of six inputs and four outputs. Inputs include four balanced micline switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable see table for further information. ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.6 Inputs 4 Outputs4 Balanced MicLine Inputs2 Unbalanced, Mono-Summed RCA Input PairsMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Zonepro 641 M Speaker Processor


Dbx Zonepro 641 M Speaker Processor


$499.95


The ZonePRO 641m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 641m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information). ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.6 Inputs / 4 Outputs4 Balanced Mic/Line Inputs2 Unbalanced, Mono-Summed RCA Input PairsMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Drive Rack 260 With Rta-M Reference Mic


Dbx Drive Rack 260 With Rta-M Reference Mic


$738.95


The DriveRack 260 with RTA-M Reference Microphone includes the DriveRack 260 Complete Equalization and Loudspeaker Management System and the DBX RTA-M Reference Microphone. The 260 DriveRack essentially becomes the only device that you will need between the mixer and the power amps. DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application.DriveRack 260 DriveRack 260 Complete Equalization and Loudspeaker Management SystemThe DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI software control provides easy PC-based control.RTA-M Reference MicrophoneThe DBX RTA-M Reference Microphone is omnidirectional, and has a flat frequency response, making it ideal an a measurement microphone. The RTA-M was designed to work with the DBX DriveRack Loudspeaker Management Systems for feedback elimination in venues and studios.Feedback elimination2.7 seconds of alignment and zone delayRS-232 PC GUI Software Interface controlClassic dbx compression and limitingGraphic and parametric EQsAuto-EQ functionFull bandpass, crossover, and routing configurationsAuto gain controlPink noise generator and fulltime RTASetup wizard with JBL speaker and Crown power amplifier tuningsSecurity lockoutWall panel control inputs for permanent installations

Dbx 560A 500 Series Compressor / Limiter


Dbx 560A 500 Series Compressor / Limiter


$199.95


The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to the 900 Series and the 560A continues that tradition.Featuring the same switch-selectable OverEasy and Hard Knee compression curves as the industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! Its also versatile enough to go from subtle compression to “brick wall” peak limiting.Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560A’s Hard Knee compression and high ratios for bombproof protection against overload distortion in digital recording, P.A. systems and broadcast signals.The 560A’s 19-segment, switchable Input/Output LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the dbx 560A’s unique “INFINITY +” inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway mix levels.OverEasy or classic hard knee compression with dbx’ ultra-musical program dependent attack and release timesCompression ratio variable from 1:1 through infinity:1 to -1:1Precise RMS gain reduction and input/output meter displays with calibration control for different operating levelsTrue RMS level detectionExclusive Infinity+ compression using negative ratios

dbx 560A 500 Series Compressor / Limiter


dbx 560A 500 Series Compressor / Limiter


$199.95


The dbx 560A CompressorLimiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to the 900 Series and the 560A continues that tradition.Featuring the same switch-selectable OverEasy and Hard Knee compression curves as the industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything Its also versatile enough to go from subtle compression to brick wall peak limiting.Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560As Hard Knee compression and high ratios for bombproof protection against overload distortion in digital recording, P.A. systems and broadcast signals.The 560As 19-segment, switchable InputOutput LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the dbx 560As unique INFINITY inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway mix levels.OverEasy or classic hard knee compression with dbx ultra-musical program dependent attack and release timesCompression ratio variable from 11 through infinity1 to -11Precise RMS gain reduction and inputoutput meter displays with calibration control for different operating levelsTrue RMS level detectionExclusive Infinity compression using negative ratios

Applied Microphone Technology AMT WS Double Clarinet/Oboe Microphone with BP45 Preamp Standard


Applied Microphone Technology AMT WS Double Clarinet/Oboe Microphone with BP45 Preamp Standard


$615


The AMT WS Clip-On Double Microphone System includes the WS Double condenser microphone and the BP45 beltpack preamp. The WS is a low-profile double condenser microphone that attaches to the clarinet, alto and bass flute, or oboe with a Ultra- miniature l

Applied Microphone Technology P800 Low Profile Clip On Condenser Trumpet Microphone With Preamp - Regular


Applied Microphone Technology P800 Low Profile Clip On Condenser Trumpet Microphone With Preamp – Regular


$656


The P800 is AMT’s first choice recommendation for the brass player looking for an “Off the Bell” mounting system or requiring a microphone that can with stand high SPL levels that a trumpet is capable of producing. The AMT P800 is an excellent choice for soft to loud music for a principal artist, ensemble setting, or a soloist. The microphone is suspended in a 4-point isolation ring reducing key and handling noise.The P800 is the choice for top professionals that look for the most natural sound reproduction possible from a clip-on microphone. All versions of the P800 now include updated features including D.C.T. (Disconnect Cable Technology). DCT allows the user the ability to connect the Wi5IIC creating a belt pack free wireless system or to other major brand wireless systems. With a change in a cable, convert a P800 from wired to “W” ireless setups. Cables and wireless systems sold separately depending on which model is ordered. See available models for options.The AMT P800 Trumpet microphone system is the only system on the market specifically designed to handle the highest SPL levels that a trumpet can reproduce. The element, somewhere in size between a small and large diaphragm is hand made by AMT and larger than AMT’s standard size elements. The P800 microphone system allows for even the loudest of trumpet players to use the microphone.The microphone mounts with a specially designed clamp to the lead pipe of the trumpet or flugelhorn. AMT has developed a special “”Off the bell”" mounting system for this model for the player that wants an alternative to a bell mounting system. Additional clamps can be purchased in order to quickly move the microphone from horn to horn.The P800 in its stock configuration is the perfect choice for the player needing a hardwired beltpack system.The P800 Studio comes complete with the AP40 Studio preamp, case, and AMT disconnecting cable technology to allow the microphone to be usedNatural sounding trumpet specific microphone systemSpecial element prevents microphone overload”Off the bell” clamping systemBelt pack Preamp1/4 XLR CableHard shell Blo-mold protective caseOperates with Phantom power or 9-Volt batteryConverts from a a “Belt pack” series model “Studio” style preamp, to a “Belt pack” series model, or to the AMT “W”ireless setup

Used Applied Microphone Technology Amt P800 Trumpet/Flugelhorn Microphone With Bp45 Preamp


Used Applied Microphone Technology Amt P800 Trumpet/Flugelhorn Microphone With Bp45 Preamp


$577.28


The P800 is AMT’s first choice recommendation for the brass player looking for an “Off the Bell” mounting system or requiring a microphone that can with stand high SPL levels that a trumpet is capable of producing. The AMT P800 is an excellent choice for soft to loud music for a principal artist, ensemble setting, or a soloist. The microphone is suspended in a 4-point isolation ring reducing key and handling noise.The P800 is the choice for top professionals that look for the most natural sound reproduction possible from a clip-on microphone. All versions of the P800 now include updated features including D.C.T. (Disconnect Cable Technology). DCT allows the user the ability to connect the Wi5IIC creating a belt pack free wireless system or to other major brand wireless systems. With a change in a cable, convert a P800 from wired to “W” ireless setups. Cables and wireless systems sold separately depending on which model is ordered. See available models for options.The AMT P800 Trumpet microphone system is the only system on the market specifically designed to handle the highest SPL levels that a trumpet can reproduce. The element, somewhere in size between a small and large diaphragm is hand made by AMT and larger than AMT’s standard size elements. The P800 microphone system allows for even the loudest of trumpet players to use the microphone.The microphone mounts with a specially designed clamp to the lead pipe of the trumpet or flugelhorn. AMT has developed a special “”Off the bell”" mounting system for this model for the player that wants an alternative to a bell mounting system. Additional clamps can be purchased in order to quickly move the microphone from horn to horn.The P800 in its stock configuration is the perfect choice for the player needing a hardwired beltpack system.The P800 Studio comes complete with the AP40 Studio preamp, case, and AMT disconnecting cable technology to allow the microphone to be used wireless with the AMT Wi5IIC. Shure, Sabine, and Sennheiser cables sold separately.Natural sounding trumpet specific microphone systemSpecial element prevents microphone overload”Off the bell” clamping systemBelt pack Preamp1/4 XLR CableHard shell Blo-mold protective caseOperates with Phantom power or 9-Volt batteryConverts from a a “Belt pack” series model “Studio” style preamp, to a “Belt pack” series model, or to the AMT “W”ireless setup

Used Applied Microphone Technology Amt P800 Trumpet/Flugelhorn Microphone With Bp45 Preamp Regular 190839731876


Used Applied Microphone Technology Amt P800 Trumpet/Flugelhorn Microphone With Bp45 Preamp Regular 190839731876


$524.8


The P800 is AMT’s first choice recommendation for the brass player looking for an “Off the Bell” mounting system or requiring a microphone that can with stand high SPL levels that a trumpet is capable of producing. The AMT P800 is an excellent choice for soft to loud music for a principal artist, ensemble setting, or a soloist. The microphone is suspended in a 4-point isolation ring reducing key and handling noise.The P800 is the choice for top professionals that look for the most natural sound reproduction possible from a clip-on microphone. All versions of the P800 now include updated features including D.C.T. (Disconnect Cable Technology). DCT allows the user the ability to connect the Wi5IIC creating a belt pack free wireless system or to other major brand wireless systems. With a change in a cable, convert a P800 from wired to “W” ireless setups. Cables and wireless systems sold separately depending on which model is ordered. See available models for options.The AMT P800 Trumpet microphone system is the only system on the market specifically designed to handle the highest SPL levels that a trumpet can reproduce. The element, somewhere in size between a small and large diaphragm is hand made by AMT and larger than AMT’s standard size elements. The P800 microphone system allows for even the loudest of trumpet players to use the microphone.The microphone mounts with a specially designed clamp to the lead pipe of the trumpet or flugelhorn. AMT has developed a special “”Off the bell”" mounting system for this model for the player that wants an alternative to a bell mounting system. Additional clamps can be purchased in order to quickly move the microphone from horn to horn.The P800 in its stock configuration is the perfect choice for the player needing a hardwired beltpack system.The P800 Studio comes complete with the AP40 Studio preamp, case, and AMT disconnecting cable technology to allow the microphone to be used wireless with the AMT Wi5IIC. Shure, Sabine, and Sennheiser cables sold separately.Natural sounding trumpet specific microphone systemSpecial element prevents microphone overload”Off the bell” clamping systemBelt pack Preamp1/4 XLR CableHard shell Blo-mold protective caseOperates with Phantom power or 9-Volt batteryConverts from a a “Belt pack” series model “Studio” style preamp, to a “Belt pack” series model, or to the AMT “W”ireless setup

Dbx Driverack 220I Signal Processor


Dbx Driverack 220I Signal Processor


$149.99


Save BIG when you buy today!

Applied Microphone Technology AMT P800 Trumpet/Flugelhorn Microphone with BP45 P


Applied Microphone Technology AMT P800 Trumpet/Flugelhorn Microphone with BP45 P


$524.8


The P800 is AMTs first choice recommendation for the brass player looking for an Off the Bell mounting system or requiring a microphone that can with stand high SPL levels that a trumpet is capable of producing. The AMT P800 is an excellent choice for soft to loud music for a principal artist, ensemble setting, or a soloist. The microphone is suspended in a 4-point isolation ring reducing key and handling noise.The P800 is the choice for top professionals that look for the most natural sound reproduction possible from a clip-on microphone. All versions of the P800 now include updated features including D.C.T. Disconnect Cable Technology. DCT allows the user the ability to connect the Wi5IIC creating a belt pack free wireless system or to other major brand wireless systems. With a change in a cable, convert a P800 from wired to W ireless setups. Cables and wireless systems sold separately depending on which model is ordered. See available models for options.The AMT P800 Trumpet microphone system is the only system on the market specifically designed to handle the highest SPL levels that a trumpet can reproduce. The element, somewhere in size between a small and large diaphragm is hand made by AMT and larger than AMTs standard size elements. The P800 microphone system allows for even the loudest of trumpet players to use the microphone.The microphone mounts with a specially designed clamp to the lead pipe of the trumpet or flugelhorn. AMT has developed a special Off the bell mounting system for this model for the player that wants an alternative to a bell mounting system. Additional clamps can be purchased in order to quickly move the microphone from horn to horn.The P800 in its stock configuration is the perfect choice for the player needing a hardwired beltpack system.The P800 Studio comes complete with the AP40 Studio preamp, case, and AMT disconnecting cable technology to allow the microphone to be used wireless with the AMT Wi5IIC. Shure, Sabine, and Sennheiser cables sold separately.Natural sounding trumpet specific microphone systemSpecial element prevents microphone overloadquotOff the bellquot clamping systemBelt pack Preamp14 XLR CableHard shell Blo-mold protective caseOperates with Phantom power or 9-Volt batteryConverts from a a quotBelt packquot series model quotStudioquot style preamp, to a quotBelt packquot series model, or to the AMT quotWquotireless setup

DBX ZonePro 1261m 12x6 Digital Zone Processor - Black


DBX ZonePro 1261m 12×6 Digital Zone Processor – Black


$819


12×6 Digital Zone Processor

Dbx Driverack Eq Combo W Power Supply Signal Processor


Dbx Driverack Eq Combo W Power Supply Signal Processor


$924.99


DRIVERACK 481 EQ & LOUDSPEAKER W/480 P REMOTE POWER SYSTEM.

DBX AFS2 Advanced Feedback SuppressionĀ® Processor with Full LCD Display - Black


DBX AFS2 Advanced Feedback SuppressionĀ® Processor with Full LCD Display – Black


$329


Advanced Feedback SuppressionĀ® Processor with Full LCD Display

dbx RTA-M Reference Microphone for DriveRack PA


dbx RTA-M Reference Microphone for DriveRack PA


$99.95


Omni-directional, flat frequency, measurement mic. Requires phantom power.

Dbx Rta-M Reference Microphone For Driverack Pa


Dbx Rta-M Reference Microphone For Driverack Pa


$99.95


Omni-directional, flat frequency, measurement mic. <BR/>Requires phantom power.
Advertisement

Comments are closed.