Dbx 286A Mic Pre Amp

February 2nd, 2012 by admin Leave a reply »

DBX 286s Microphone Pre-amp Processor - White


DBX 286s Microphone Pre-amp Processor – White


$219


Microphone Pre-amp Processor

Dbx Zonepro 1261M Speaker Processor


Dbx Zonepro 1261M Speaker Processor


$749.95


The ZonePRO products have long been the obvious choice for managing commercial audio applications. They’re easy to install and use – thanks to step-by-step setup wizards – and they’re backed by long track record of dbx reliability. The fact that so many are in use in locations worldwide speaks to their popularity and dependable performance.The ZonePRO 1261m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1261m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlledmicrophone gain allows adjustment of microphone gain per channel.The 1261m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1261m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).ZonePRO Designer-the configuration, control and monito2 Inputs / 6 Outputs6 Balanced Mic/Line Inputs4 Unbalanced, Mono-Summed RCA Input PairsS/PDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Zonepro 641 M Speaker Processor


Dbx Zonepro 641 M Speaker Processor


$499.95


The ZonePRO 641m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 641m features a total of six inputs and four outputs. Inputs include four balanced mic/line switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information). ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.6 Inputs / 4 Outputs4 Balanced Mic/Line Inputs2 Unbalanced, Mono-Summed RCA Input PairsMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Zonepro 1260M Speaker Processor


Dbx Zonepro 1260M Speaker Processor


$929


The ZonePRO 1260m offers fixed I/O, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced mic/line switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one S/PDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable (see table for further information).ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.12 Inputs / 6 Outputs6 Balanced Mic/Line Inputs4 Unbalanced, Mono-Summed RCA Input PairsS/PDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusComprehensive Signal MeteringFront Panel LCD9 User-Specified Front Panel ControlOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx Drive Rack 260 With Rta-M Reference Mic


Dbx Drive Rack 260 With Rta-M Reference Mic


$738.95


The DriveRack 260 with RTA-M Reference Microphone includes the DriveRack 260 Complete Equalization and Loudspeaker Management System and the DBX RTA-M Reference Microphone. The 260 DriveRack essentially becomes the only device that you will need between the mixer and the power amps. DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application.DriveRack 260 DriveRack 260 Complete Equalization and Loudspeaker Management SystemThe DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI software control provides easy PC-based control.RTA-M Reference MicrophoneThe DBX RTA-M Reference Microphone is omnidirectional, and has a flat frequency response, making it ideal an a measurement microphone. The RTA-M was designed to work with the DBX DriveRack Loudspeaker Management Systems for feedback elimination in venues and studios.Feedback elimination2.7 seconds of alignment and zone delayRS-232 PC GUI Software Interface controlClassic dbx compression and limitingGraphic and parametric EQsAuto-EQ functionFull bandpass, crossover, and routing configurationsAuto gain controlPink noise generator and fulltime RTASetup wizard with JBL speaker and Crown power amplifier tuningsSecurity lockoutWall panel control inputs for permanent installations

DBX RTA-M Audio analyzing mic for the DriveRack PA series - Black


DBX RTA-M Audio analyzing mic for the DriveRack PA series – Black


$99.95


Audio analyzing mic for the DriveRack PA series

Dbx 586 Dual Vacuum Tube Pre Audio Converter


Dbx 586 Dual Vacuum Tube Pre Audio Converter


$399.99


Save BIG when you buy today!

Dbx Rta-M Reference Microphone For Driverack Pa


Dbx Rta-M Reference Microphone For Driverack Pa


$99.95


Omni-directional, flat frequency, measurement mic. Requires phantom power.

Dbx 220I 2X2 Loudspeaker Management System With Display


Dbx 220I 2X2 Loudspeaker Management System With Display


$629.95


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 220i provides both system and microphone processing thanks to its full set of processing features and mic/line inputs. Click on the “View additional manufacturer information” link below to get the full scoop!Advanced feedback suppression (AFS) Graphic and parametric EQ Compressor Limiter Auto gain control Noise gating De-esser Ducker Bandpass filters 2×2 matrix mixer 1.3 seconds of delay RS-232 PC GUI control Mic/line inputs Wall panel control Security lockout

dbx DriveRack PX Powered Speaker Optimizer


dbx DriveRack PX Powered Speaker Optimizer


$131.99


Powered speakers are beautiful things. Everything you need bundled into simple, tidy, portable packages. Just grab em and go, right Well, you may think your powered speaker system is complete, but youre missing half the picture. DriveRack PX is the other half. With the PX, dbx has created a processor specifically tailored for powered speakers. Utilizing dbxs highly acclaimed DriveRack technology, the PX picks up where your powered speakers leave off. The DriveRack PX Powered Speaker Optimizer has everything you need to get the most out of your stereo powered speaker system. It even includes stereo or mono subwoofer support. With the included dbx M2 measurement mic, Auto-EQ corrects for audible deficiencies in the room environment. Dbxs patented Advanced Feedback Suppression AFSTM kills nasty feedback, allowing problem-free operation at higher sound levels, while dbxs patented Subharmonic Synthesizer extends bass response for enhanced bottom end. With all that, you also get classic dbx compression and the protection offered by dbxs graceful PeakStopPlus limiting. Your ears, your audience, and your powered speakers will forever thank you. In spite of all that sophistication, rest assured dbx wont overcomplicate the simplicity of your rig. Dbxs exclusive Setup, Auto-EQ, AFS Wizards, and out-of-the-box support for a host of JBL and other popular powered speakers, make setup a snap. Louder, cleaner, better sound than you thought possible from your powered speakers.Stereo feedback elimination with 12 feedback notch filters Dual 28-band graphic EQ Classic dbx Compressor 120A subharmonic synthesizer Stereo multi-band parametric EQ Stereo PeakStopPlus limiters Pink noise generator Auto-EQ with 28-band RTA JBL and other popular powered speakers included in Setup Wizard dbx M2 measurement mic and zippered pouch included Front panel RTA-Mic XLR inputwith phantom power 25 user programs 25 factory programs 2-channel XLR Input 2-channel XLR Output 2-channel XLR Sub Output 24-bit ADC24-bit DAC, >110 dB dynamic range dbx Type IVTM conversion system Full graphic LCD display

Dbx Driverack Eq Combo W Power Supply Signal Processor


Dbx Driverack Eq Combo W Power Supply Signal Processor


$924.99


DRIVERACK 481 EQ & LOUDSPEAKER W/480 P REMOTE POWER SYSTEM.

dbx 1066 Compressor/Limiter/Gate


dbx 1066 Compressor/Limiter/Gate


$378.36


1066 Dual Compressor Limiter Gate Want to instantly add Color that classic dbx response to your mix Its there at the touch of the Auto button. Or use the independent Attack and Release controls to tailor the 1066 to your specific needs. Unwanted frequencies or mic bleed in the signal path Frequency dependent gain control is a snap to set up and execute with our Side Chain External button SC Ext. Use the Side Chain Monitor button SC Mon and your favorite EQ to dial in the specific frequencies you want to trigger the device. As has become our standard, the contour switch allows entire mixes to be easily smoothed with soft compression while keeping low frequencies from punching holes in the overall mix. Selectable input and output metering allow you to make sure that everything is matched up level-wise, maximizing your signal-to-noise ratio.Selectable auto classic dbx or manual variable Attack and Release compression Contour switch removes unwanted low frequency information from detector circuit True stereo or dual mono operation

Dbx Driverack Pa2


Dbx Driverack Pa2


$439


The dbx Driverack is one of the most innovative and helpful tools to come along for the live sound engineer in decades. It incorporates crossover, EQ, compression, delay parameters and much more within individual presets. These presets can then be applied to specific rooms, expected environments and applications. The dbx Driverack PA2 incorporates heavily researched and well-considered improvements in the original Driverack system.The DriveRack PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ and AFS algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android, iOS, Mac, or Windows device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.AutoEQNew, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.With the RTA Mic “listening” to your room, the new, updated DriveRack PA2 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.Enhanced AFS Feedback EliminationEnhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system’s tone.Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before it even has a chance, while never altering your sound.

dbx DriveRack PA2


dbx DriveRack PA2


$439


The dbx Driverack is one of the most innovative and helpful tools to come along for the live sound engineer in decades. It incorporates crossover, EQ, compression, delay parameters and much more within individual presets. These presets can then be applied to specific rooms, expected environments and applications. The dbx Driverack PA2 incorporates heavily researched and well-considered improvements in the original Driverack system.The DriveRack PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbxs proprietary AutoEQ and AFS algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android, iOS, Mac, or Windows device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.AutoEQNew, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.With the RTA Mic listening to your room, the new, updated DriveRack PA2 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.Enhanced AFS Feedback EliminationEnhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your systems tone.Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before it even has a chance, while never altering your sound.

dbx DriveRack VENU360 Speaker Management System  190839001689


dbx DriveRack VENU360 Speaker Management System 190839001689


$639.2


The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx proprietary AutoEQ and AFS algorithms, additional input channels, ethernet control via an Android, iOS, Mac, or Windows device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.AutoEQNew, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.With a RTA Mic listening to your room, the updated DriveRack VENU360 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds using sine sweeps. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.The AutoEQ is now located in the output processing stage, which means independent sections of a system can be equalized automatically. This allows AutoEQ to be used on the FOH system as well as the stage monitors, zones and tower delaysEnhanced AFS Feedback Elimination Enhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system tone.Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack VENU360 listens for and anticipates feedback and automatically removes it before it even has a chance, while never altering your sound.Updated Wizard Setup FunctionsUpdated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date.Wizard functions in the DriveRack VENU360 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system. The Wizards help you configure routing, level balancing, AutoEQ, Advanced Feedback Suppression, and provide access to updated speaker tunings available for most major speaker brands. The addition of a Monitor Wizard makes it easy to configure and optimize stage monitors.Mobile ControlConnect to the DriveRack VENU360 through your local network with your Android, iOS, Mac, or Windows device to customize the sound of your loudspeaker system so it sounds and performs optimally. The app lets you directly manipulate the Compressor, Graphic EQ, Parametric EQ, Crossover settings, Speaker profiles, and more with its attractive, easy-to-use graphical user interface.Input Processingdbx CompressionAFS Advanced Feedback Suppression31-Band Graphic EQ12-Band Parametric EQ with narrow notch capabilitiesSubharmonic SynthesisBackline DelayNoise GateOutput

dbx goRack Performance Processor


dbx goRack Performance Processor


$29


A small and inexpensive speaker processor that will result in unprecedented performance from your existing powered speaker system. Based on dbxs DriveRack Series, the goRack provides Anti-Feedback, Compression, Sub-Harmonic Synth and EQ. Each processing function is enabled or disabled via top-level function buttons, and settings can be adjusted via goRack large data wheel.goRack rear panel features combination 14XLR inputs that can be connected to mixer outputs or to microphones directly. When using a mic, the goRacks MicLine switch selects the proper input sensitivity and gain range while dual gain controls on the top provide independent level adjustment. goRack 18 Aux input allows for direct connection of mobile music players while XLR outputs interface with powered speakers. The goRack is perfect for applications from a mixer, or with its dual XLR inputs and Aux input, it can be used as a standalone performance processormixer for the solo artist.Feedback supressionMake annoying and potentially painful audio feedback a thing of the past with the goRacks simple-to-use, Anti-Feedback processing. Based on dbxs industry-leading AFS Advanced Feedback Suppression algorithm, the goRack makes eliminating system feedback a snap. Simply press the goRacks Anti-Feedback function button and use the Data Wheel to adjust the settings. The goRack listens for, anticipates and removes feedback automatically without altering your sound.CompressionControl dynamics and fine-tune your system with the straightforward Compressor feature based on the legendary dbx 163 Compressor. Minimize peaks and level out variances in your audio source material with goRack intuitive Compressor feature.Sub-harmonic synthgoRacks Sub Synth feature is the perfect tool for adding extra bass to your system. For decades, dbxs patented Subharmonic Synthesis has been the secret weapon usCompact Form FactorAnti-Feedback Processing based on the dbx AFS Advanced Feedback Suppression algorithmdbx Compression based on the dbx 163Subharmonic SynthesisEQ 20 Musical Genre-Based 31-Band Graphic EQ SettingsDual dbx Microphone PreampLine InputsSelectable MicLine Input SettingsStereo Inputs and OutputsCombination MicLine Input Jacks and XLR Outputs18quot Stereo Aux Input for Mobile Music PlayersDevicesIndependent Left and Right Channel Volume Controls

Dbx Db12 Active Direct Box Black


Dbx Db12 Active Direct Box Black


$114


The dbx dB12 is an active direct box that utilizes custom dbx mu-metal-shielded audio transformers, high-quality Neutrik connectors, and low-noise circuitry. The dB12 direct box includes a pad switch that accommodates instrument, line, and even speaker level signals. Take even more control of your sound by utilizing the dB12 direct box's polarity invert switch to set the phase relationship between the direct and mic'd sound. <BR/> <BR/>As a professional, you don't have time for interference, so dbx includes a ground lift switch in the dB12 active direct box to solve potential hum and buzz problems due to ground loops. And between the combined shielding of the cast metal chassis and the custom-wound transformer, you can be doubly assured of a clean signal free from interference. All of this sits atop a solid, stable footprint, that will keep the dB12 direct box from being dragged around the stage. Unique contoured underside allows secure stacking of multiple dbx dB12 Active Direct Box units. <BR/><b>Input Section</b> <BR/>Input: 1 instrument/line/speaker level <BR/>Connector: 1/4″ jack <BR/>Type: Unbalanced, RF filtered <BR/>Impedance: 1M Ohm (0dB pad) <BR/>47k Ohm (20dB pad) <BR/>47k Ohm (40dB pad) <BR/>Max Input Level: +10dBu (0dB pad) <BR/>+30dBu (20dB pad) <BR/>+50dBu (40dB pad) <BR/> <BR/><b>Output Section</b> <BR/>Thru Output: 1 parallel connection from input jack <BR/>Connector: 1/4″ jack <BR/>Type: Unbalanced, RF filtered <BR/>Main Output: 1 line level <BR/>Connector: XLR male jack <BR/>Type: Balanced <BR/>Impedance: 150 Ohm typical <BR/>Max Output Level: +8dBu into 600 Ohm <BR/> <BR/><b>Performance</b> <BR/>Transformer: Custom dbx mu-metal-shielded <BR/>Frequency Response: 20Hz to 20kHz, 3dB <BR/>30Hz to 20kHz, +0/-1dB <BR/>Noise: <-105dB unweighted, 22kHz BW <BR/>THD: <0.01%, 20Hz to 20kHz BW <BR/><0.005%, 1kHz, 0dBu output <BR/> <BR/><b>General</b> <BR/>Current Drain Phantom: < 8mA <BR/>Phantom Power Range: +48 volts DC <BR/>Dimensions: 5.82″ L X 5.44″ W X 2.20″ H (148 x 138 x 56mm) <BR/>Weight: 1.4 lbs / 0.65 kg <BR/>

Dbx Driverack Venu360 Speaker Management System


Dbx Driverack Venu360 Speaker Management System


$869


The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’ proprietary AutoEQ and AFS algorithms, additional input channels, ethernet control via an Android, iOS, Mac, or Windows device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.AutoEQNew, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.With a RTA Mic listening to your room, the updated DriveRack VENU360 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds using sine sweeps. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.The AutoEQ is now located in the output processing stage, which means independent sections of a system can be equalized automatically. This allows AutoEQ to be used on the FOH system as well as the stage monitors, zones and tower delays!Enhanced AFS Feedback Elimination Enhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system’ tone.Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack VENU360 listens for and anticipates feedback and automatically removes it before it even has a chance, while never altering your sound.Updated Wizard Setup FunctionsUpdated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date.Wizard functions in the DriveRack VENU360 guide you throughInput Processingdbx CompressionAFS (Advanced Feedback Suppression)31-Band Graphic EQ12-Band Parametric EQ (with narrow notch capabilities)Subharmonic SynthesisBackline DelayNoise GateOutput ProcessingCrossover (supports full range up to mono 6-way systems)12-Band AutoEQs (8 AutoEQ bands, 4 User bands)dbx CompressionAutomatic Gain ControlSubharmonic SynthesisNoise GateTower Delays (up to 1000ms per output)8-Band Parametric EQs (used for speaker tunings)dbx LimitingDriver Alignment DelaysTested Wireless RoutersDlink 636LDlink Cloud router 2000Cisco / linksys: WRT54G2V1Netgear WGR614 v7Netgear WNR 1000

dbx DriveRack VENU360 Speaker Management System


dbx DriveRack VENU360 Speaker Management System


$703.12


The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx proprietary AutoEQ and AFS algorithms, additional input channels, ethernet control via an Android, iOS, Mac, or Windows device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.AutoEQNew, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.With a RTA Mic listening to your room, the updated DriveRack VENU360 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds using sine sweeps. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.The AutoEQ is now located in the output processing stage, which means independent sections of a system can be equalized automatically. This allows AutoEQ to be used on the FOH system as well as the stage monitors, zones and tower delaysEnhanced AFS Feedback Elimination Enhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system tone.Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack VENU360 listens for and anticipates feedback and automatically removes it before it even has a chance, while never altering your sound.Updated Wizard Setup FunctionsUpdated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date.Wizard functions in the DriveRack VENU360 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system. The Wizards help you configure routing, level balancing, AutoEQ, Advanced Feedback Suppression, and provide access to updated speaker tunings available for most major speaker brands. The addition of a Monitor Wizard makes it easy to configure and optimize stage monitors.Mobile ControlConnect to the DriveRack VENU360 through your local network with your Android, iOS, Mac, or Windows device to customize the sound of your loudspeaker system so it sounds and performs optimally. The app lets you directly manipulate the Compressor, Graphic EQ, Parametric EQ, Crossover settings, Speaker profiles, and more with its attractive, easy-to-use graphical user interface.Input Processingdbx CompressionAFS Advanced Feedback Suppression31-Band Graphic EQ12-Band Parametric EQ with narrow notch capabilitiesSubharmonic Synth

Dbx Di1 Active Direct Box


Dbx Di1 Active Direct Box


$109


The dbx DI1 is a compact, high-quality active direct injection box. Ideal for both studios and on the road, the DI1 will ensure audio signals reach their intended destination in both a balanced format and free from unwanted noise.<br><br>Connect the output from electric guitars, bass amplifiers, keyboards, etc, directly to a console mixer without the use of a microphone. Built for toughness and reliability, the DI1 has all the features of a fully featured gig-ready workhorse DI unit.<ul><li>Level and impedance matching function</li><li>Output impedance: > 600 Ohms</li><li>Signal pass through connector</li><li>Output connector: XLR balanced</li><li>Battery LED indicator</li><li>Distortion: (THD) < 0.005% at 1kHz, 0dBu</li><li>Phantom power led indicator</li><li>Max Input: +12dBu (at 0dB) Level +32dBu (at -20dB) +52dBu (at -40dB)</li><li>Output Noise: <-100dB unweighted</li><li>TS and XLR inputs and outputs</li><li>Frequency response: 10Hz to 70kHz, +0dB/-3dB</li><li>Attenuation control</li><li>Phantom Power: +18 volts DC to +48 volts DC</li><li>Ground lift switch</li><li>Main/Standby: 9V battery</li><li>Input Impedance: >250k Ohm</li><li>Metal Chassis</li></ul>

Dbx 266Xs Compressor/Gate


Dbx 266Xs Compressor/Gate


$169


The dbx 266xs Compressor/Gate is the latest in a long line of the world's most successful compressors from the inventors of the technology. Its patented Overeasy compression technology provides smooth and musical performance while the AutoDynamic attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 266xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4″ TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches. <BR/> <BR/>Adding a dbx 266xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix – adding greater clarity and making them stand out from the surrounding instruments <BR/><ul><li>Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes </li><li>New gate timing algorithms ensure the smoothest release characteristics </li><li>Program-adaptive expander/gates </li><li>Great sounding dynamics control for any type of program material </li><li>Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup </li><li>Stereo or dual-mono operation </li><li>Balanced inputs and outputs on 1/4" TRS and XLR connectors </li><li>Side Chain insert </li><li>Classic dbx "Auto" mode </li></ul>

dbx ZonePRO 641 m Speaker Processor


dbx ZonePRO 641 m Speaker Processor


$439.96


The ZonePRO 641m offers fixed IO, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 641m features a total of six inputs and four outputs. Inputs include four balanced micline switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable see table for further information. ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.6 Inputs 4 Outputs4 Balanced MicLine Inputs2 Unbalanced, Mono-Summed RCA Input PairsMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

dbx ZonePRO 1260m Speaker Processor


dbx ZonePRO 1260m Speaker Processor


$747.96


The ZonePRO 1260m offers fixed IO, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 1260m features a total of 12 inputs and six outputs. Inputs include six balanced micline switchable terminal block inputs, four mono-summed pairs of unbalanced RCA inputs and one SPDIF input for up to two digital channels. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 1260m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanentlyavailable on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 1260m features comprehensive signal metering, an informative LCD display and user-specified front panel control.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable see table for further information.ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 1260m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-bystep configuration process of the 1260m.12 Inputs 6 Outputs6 Balanced MicLine Inputs4 Unbalanced, Mono-Summed RCA Input PairsSPDIF InputMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusComprehensive Signal MeteringFront Panel LCD9 User-Specified Front Panel ControlOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx 1215 Dual 15-Band Graphic Equalizer


Dbx 1215 Dual 15-Band Graphic Equalizer


$289


Designed for use in the most demanding live situations, the dbx 1215 Dual 15-Band Graphic Equalizer provides dual channels, 15 – 2/3-octave bands, ISO frequency centers, 12dB input gain range, and switchable 40Hz/18dB per octave low-cut filters. Other quality features of the dbx 1215 EQ include 45mm faders; selectable 6dB or 15dB boost/cut range; XLR, barrier strip, and 1/4″ TRS connectors; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation.<ul><li>Switchable boost/cut range between 6dB and 15dB </li><li>Electronically balanced/unbalanced inputs </li><li>Servo balanced/unbalanced outputs </li><li>RF filtered inputs and outputs </li><li>XLR, barrier strip, and 1/4" TRS connectors </li><li>-12dB/+12dB input gain range </li><li>18dB/octave 40Hz Bessel low-cut filter </li><li>Chassis/signal ground lift capability </li><li>Internal power supply transformer </li><li>Power-off hardwire relay bypass with 2-second power-up delay </li></ul>

Dbx 234S Stereo 2/3 Way Mono 4-Way Crossover


Dbx 234S Stereo 2/3 Way Mono 4-Way Crossover


$219


The dbx 234s Stereo 2/3 Way Mono 4-Way Crossover is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid “click” controls to the high quality 1/4″ TRS inputs and outputs. <BR/> <BR/>The 234s uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234s leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. <BR/><ul><li>TRS differentially balanced ins and outs </li><li>Mode switches for mono 4-way or stereo 2-way/3-way operation </li><li>Low frequency summed (subwoofer) output </li><li>x10 range switch on both channels </li><li>40Hz high pass (low cut) filter both channels </li><li>Phase reverse switch on all outputs </li><li>Individual level controls on all outputs </li><li>24dB per octave Linkwitz-Riley filters (the professional standard) </li><li>Stereo/Mono status LEDs indicate the selected mode </li><li>dbx 2 year parts and labor as standard </li><li>CSA NRTL/C approved </li><li>CE compliant </li><li>Connectors: 1/4" TRS </li><li>Type: Electronically balanced/unbalanced, RF filtered </li><li>Impedance: Balanced >50k ohm, unbalanced >25k ohm </li><li>Max Input Level: >+22dBu balanced or unbalanced </li><li>CMRR: >40dB, typically >50dB at 1kHz </li></ul>
Advertisement

Comments are closed.