Dbx 266Xl 8 @460

October 29th, 2010 by admin Leave a reply »

Dbx 266Xl Compressor


Dbx 266Xl Compressor


$49.99


Save BIG when you buy today!

Dbx 2008 266Xl Compressor


Dbx 2008 266Xl Compressor


$49.99


Included accessories: Power Cable/Supply.

DRIVERACKPA2 Complete Loudspeaker Management System


DRIVERACKPA2 Complete Loudspeaker Management System


$523.9


The dbx Driverack is one of the most innovative and helpful tools to come along for the live sound engineer in decades. It incorporates crossover, EQ, compression, delay parameters and much more within individual presets. These presets can then be applied to specific rooms, expected environments and applications. The dbx Driverack PA2 incorporates heavily researched and well-considered improvements in the original Driverack system.Updated Wizard Setup FunctionsUpdated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date. Wizard functions on the DriveRack PA2 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system.Input Processingdbx Compression.AFS (Advanced Feedback Suppression).Graphic EQ.8-Band Parametric EQ (adjusted when using the AutoEQ).Subharmonic Synthesis.Output ProcessingCrossover (supports full range, 2-way, and 3-way systems).8-Band Parametric EQs (used for speaker tunings).dbx Limiting.Driver Alignment Delays.

Dbx Driverack Venu360 Speaker Management System


Dbx Driverack Venu360 Speaker Management System


$869


The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’ proprietary AutoEQ and AFS algorithms, additional input channels, ethernet control via an Android, iOS, Mac, or Windows device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.AutoEQNew, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.With a RTA Mic listening to your room, the updated DriveRack VENU360 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds using sine sweeps. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.The AutoEQ is now located in the output processing stage, which means independent sections of a system can be equalized automatically. This allows AutoEQ to be used on the FOH system as well as the stage monitors, zones and tower delays!Enhanced AFS Feedback Elimination Enhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system’ tone.Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack VENU360 listens for and anticipates feedback and automatically removes it before it even has a chance, while never altering your sound.Updated Wizard Setup FunctionsUpdated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date.Wizard functions in the DriveRack VENU360 guide you throughInput Processingdbx CompressionAFS (Advanced Feedback Suppression)31-Band Graphic EQ12-Band Parametric EQ (with narrow notch capabilities)Subharmonic SynthesisBackline DelayNoise GateOutput ProcessingCrossover (supports full range up to mono 6-way systems)12-Band AutoEQs (8 AutoEQ bands, 4 User bands)dbx CompressionAutomatic Gain ControlSubharmonic SynthesisNoise GateTower Delays (up to 1000ms per output)8-Band Parametric EQs (used for speaker tunings)dbx LimitingDriver Alignment DelaysTested Wireless RoutersDlink 636LDlink Cloud router 2000Cisco / linksys: WRT54G2V1Netgear WGR614 v7Netgear WNR 1000

Dbx Driverack Pa2


Dbx Driverack Pa2


$439


The dbx Driverack is one of the most innovative and helpful tools to come along for the live sound engineer in decades. It incorporates crossover, EQ, compression, delay parameters and much more within individual presets. These presets can then be applied to specific rooms, expected environments and applications. The dbx Driverack PA2 incorporates heavily researched and well-considered improvements in the original Driverack system.<BR/><BR/>The DriveRack PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx's proprietary AutoEQ and AFS algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android, iOS, Mac, or Windows device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.<BR/><BR/><strong>AutoEQ</strong><BR/>New, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.<BR/><BR/>With the RTA Mic “listening” to your room, the new, updated DriveRack PA2 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.<BR/><BR/><strong>Enhanced AFS Feedback Elimination</strong><BR/>Enhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system's tone.<BR/><BR/>Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before it even has a chance, while never altering your sound.<BR/><BR/><strong<ul><li>All New Setup Wizard</li><li>Streamlined AutoEQ</li><li>All New AFS (Advanced Feedback Suppression)</li><li>Mobile Control (Android, iOS, Mac, Windows)</li><li>dbx Compression</li><li>Graphic EQ</li><li>8-Band Parametric EQ (adjusted when using the AutoEQ) Input</li><li>Subharmonic Synthesis</li><li>Crossover (supports full range, 2-way, and 3-way systems)</li><li>8-Band Parametric EQs (used for speaker tunings) Output</li><li>dbx Limiting</li><li>Driver Alignment Delays</li></ul>

dbx ZonePRO 641 m Speaker Processor


dbx ZonePRO 641 m Speaker Processor


$439.96


The ZonePRO 641m offers fixed IO, pre-configured architecture, configurable insert processing and optional duplication of audio channels to another ZonePRO device via a link bus.The 641m features a total of six inputs and four outputs. Inputs include four balanced micline switchable terminal block inputs and two mono-summed pairs of unbalanced RCA inputs. Hardware-controlled microphone gain allows adjustment of microphone gain per channel.The 641m device has a pre-configured architecture with input processing, a central matrix and output processing. Two input insert positions and one output insert position allow channel-specific insert processing to be configured. AutoWarmth, a psychoacoustic function that maintains full frequency bandwidth even when the signal level has dropped, is permanently available on each output zone.A link bus allows duplication of the first six audio channels to another ZonePRO device in applications where additional output zones are required.The front panel of the 641m features a power status LED, a network traffic LED, and an RS-232 control port.Additional system control is offered in the form of optional Zone Controllers. This collection of hardware wall-controllers represents a series of simple, elegant user interfaces for functions such as volume, source and preset control.All ZonePRO devices can be controlled by third party control systems via RS-232 or Ethernet as applicable see table for further information. ZonePRO Designer-the configuration, control and monitoring software for the ZonePRO family of devices-offers control of the ZonePRO 641m via Ethernet or RS-232. The Configuration Wizard within ZonePRO Designer guides users through the step-by-step configuration process of the 641m.6 Inputs 4 Outputs4 Balanced MicLine Inputs2 Unbalanced, Mono-Summed RCA Input PairsMicrophone Gain per ChannelPre-Configured ArchitectureTwo Configurable Input Insert PositionsOne Configurable Output Insert PositionAutoWarmth per Output ZoneLink BusOptional ZC ControllersEthernet ControlSerial ControlThird Party ControlWizard-Driven Configuration

Dbx 150 Noise Gate


Dbx 150 Noise Gate


$69.99


Save BIG when you buy today!

Dbx Zc-4 Wall Mount Zone Control


Dbx Zc-4 Wall Mount Zone Control


$99.95


The Zone Controllers, like this ZC-4, offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1,000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.<br><br>The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for ZonePRO devices.<br>

Dbx Db12 Active Direct Box Black


Dbx Db12 Active Direct Box Black


$114


The dbx dB12 is an active direct box that utilizes custom dbx mu-metal-shielded audio transformers, high-quality Neutrik connectors, and low-noise circuitry. The dB12 direct box includes a pad switch that accommodates instrument, line, and even speaker level signals. Take even more control of your sound by utilizing the dB12 direct box's polarity invert switch to set the phase relationship between the direct and mic'd sound. <BR/> <BR/>As a professional, you don't have time for interference, so dbx includes a ground lift switch in the dB12 active direct box to solve potential hum and buzz problems due to ground loops. And between the combined shielding of the cast metal chassis and the custom-wound transformer, you can be doubly assured of a clean signal free from interference. All of this sits atop a solid, stable footprint, that will keep the dB12 direct box from being dragged around the stage. Unique contoured underside allows secure stacking of multiple dbx dB12 Active Direct Box units. <BR/><b>Input Section</b> <BR/>Input: 1 instrument/line/speaker level <BR/>Connector: 1/4″ jack <BR/>Type: Unbalanced, RF filtered <BR/>Impedance: 1M Ohm (0dB pad) <BR/>47k Ohm (20dB pad) <BR/>47k Ohm (40dB pad) <BR/>Max Input Level: +10dBu (0dB pad) <BR/>+30dBu (20dB pad) <BR/>+50dBu (40dB pad) <BR/> <BR/><b>Output Section</b> <BR/>Thru Output: 1 parallel connection from input jack <BR/>Connector: 1/4″ jack <BR/>Type: Unbalanced, RF filtered <BR/>Main Output: 1 line level <BR/>Connector: XLR male jack <BR/>Type: Balanced <BR/>Impedance: 150 Ohm typical <BR/>Max Output Level: +8dBu into 600 Ohm <BR/> <BR/><b>Performance</b> <BR/>Transformer: Custom dbx mu-metal-shielded <BR/>Frequency Response: 20Hz to 20kHz, 3dB <BR/>30Hz to 20kHz, +0/-1dB <BR/>Noise: <-105dB unweighted, 22kHz BW <BR/>THD: <0.01%, 20Hz to 20kHz BW <BR/><0.005%, 1kHz, 0dBu output <BR/> <BR/><b>General</b> <BR/>Current Drain Phantom: < 8mA <BR/>Phantom Power Range: +48 volts DC <BR/>Dimensions: 5.82″ L X 5.44″ W X 2.20″ H (148 x 138 x 56mm) <BR/>Weight: 1.4 lbs / 0.65 kg <BR/>

Dbx Dbxzc9v Wall Mount Zone Volume Control&*


Dbx Dbxzc9v Wall Mount Zone Volume Control&*


$69


Save BIG when you buy today!

Dbx 560A 500 Series Compressor / Limiter


Dbx 560A 500 Series Compressor / Limiter


$199.95


The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to the 900 Series and the 560A continues that tradition.Featuring the same switch-selectable OverEasy and Hard Knee compression curves as the industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! Its also versatile enough to go from subtle compression to “brick wall” peak limiting.Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560A’s Hard Knee compression and high ratios for bombproof protection against overload distortion in digital recording, P.A. systems and broadcast signals.The 560A’s 19-segment, switchable Input/Output LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the dbx 560A’s unique “INFINITY +” inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway mix levels.OverEasy or classic hard knee compression with dbx’ ultra-musical program dependent attack and release timesCompression ratio variable from 1:1 through infinity:1 to -1:1Precise RMS gain reduction and input/output meter displays with calibration control for different operating levelsTrue RMS level detectionExclusive Infinity+ compression using negative ratios

Dbx 266A Compressor


Dbx 266A Compressor


$59.99


Save BIG when you buy today!
Advertisement

Comments are closed.