DBX 2 SERIES GRAPIC EQ Standard

August 30th, 2009 by admin Leave a reply »

Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Black


Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Black


$639


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. <BR/> <BR/>The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. <BR/> <BR/>Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination <BR/>2.7 seconds of alignment and zone delay <BR/>RS-232 PC GUI control <BR/>Classic dbx compression and limiting <BR/>Graphic and parametric EQs <BR/>Auto-EQ function <BR/>Full bandpass, crossover, and routing configurations <BR/>Auto gain control <BR/>Pink noise generator and fulltime RTA <BR/>Setup wizard with JBL speaker and Crown power amplifier tunings <BR/>Security lockout <BR/>Wall panel control inputs for permanent installations <BR/>

dbx DriveRack 260 Complete Equalization and Loudspeaker Control System


dbx DriveRack 260 Complete Equalization and Loudspeaker Control System


$562.32


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters to provide protection against speaker blowouts, and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Dbx Drive Rack 260 With Rta-M Reference Mic


Dbx Drive Rack 260 With Rta-M Reference Mic


$738.95


The DriveRack 260 with RTA-M Reference Microphone includes the DriveRack 260 Complete Equalization and Loudspeaker Management System and the DBX RTA-M Reference Microphone. The 260 DriveRack essentially becomes the only device that you will need between the mixer and the power amps. DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application.DriveRack 260 DriveRack 260 Complete Equalization and Loudspeaker Management SystemThe DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI software control provides easy PC-based control.RTA-M Reference MicrophoneThe DBX RTA-M Reference Microphone is omnidirectional, and has a flat frequency response, making it ideal an a measurement microphone. The RTA-M was designed to work with the DBX DriveRack Loudspeaker Management Systems for feedback elimination in venues and studios.Feedback elimination2.7 seconds of alignment and zone delayRS-232 PC GUI Software Interface controlClassic dbx compression and limitingGraphic and parametric EQsAuto-EQ functionFull bandpass, crossover, and routing configurationsAuto gain controlPink noise generator and fulltime RTASetup wizard with JBL speaker and Crown power amplifier tuningsSecurity lockoutWall panel control inputs for permanent installations

dbx DriveRack 260 Complete Equalization and Loudspeaker Control System Black


dbx DriveRack 260 Complete Equalization and Loudspeaker Control System Black


$639


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters to provide protection against speaker blowouts, and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System


Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System


$562.32


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Regular 190839685971


Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Regular 190839685971


$511.2


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

dbx DriveRack 260 Complete Equalization and Loudspeaker Control System Regular 1


dbx DriveRack 260 Complete Equalization and Loudspeaker Control System Regular 1


$511.2


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters to provide protection against speaker blowouts, and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Dbx 215S Dual Channel 15-Band Graphic Equalizer


Dbx 215S Dual Channel 15-Band Graphic Equalizer


$179


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 215s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 215s includes two 15-band channels of 2/3-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 215s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 215s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. Dual 15-band, 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of 6 or 12 dB Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inpts and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB

Used Dbx 215S Dual Channel 15-Band Graphic Equalizer Regular 190839718693


Used Dbx 215S Dual Channel 15-Band Graphic Equalizer Regular 190839718693


$143.2


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 215s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 215s includes two 15-band channels of 2/3-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 215s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 215s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. Dual 15-band, 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of 6 or 12 dB Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inpts and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB

Dbx 530 Series Parametric Eq


Dbx 530 Series Parametric Eq


$219


The dbx 530 Parametric EQ offers a unique degree of equalization flexibility in the popular 500 Series format. Based upon the classic dbx 905, the dbx 530 is an uncompromising equalizer offering true, fully parametric operation of all three filter bands. dbx has a much-heralded history with modular processors dating back to the 900 Series, and the dbx 530 continues that tradition. The dbx 530′s overlapping bands each offer control of frequency bandwidth (Q) and up to 15dB of reciprocal cut or boost to provide exact, complimentary filter action for the most demanding of equalization needs. For problem situations requiring the removal of spurious signals, each of the bands can be independently switched into infinite notch mode without affecting the operation of others. In situations where a shelving equalizer will produce better results than a peaking one, the 530s high and low bands can be independently switched from peaking to shelving operation. You can also make instant affected/bypassed comparisons using the 530′s On switch.Based on the classic dbx 905 3-band parametric EQ Selectable bell or shelf type filters on low and high frequency bands Adjustable Q on each band

DBX 530 Parametric EQ - 500 Series - Black


DBX 530 Parametric EQ – 500 Series – Black


$219


Parametric EQ – 500 Series

dbx iEQ-31 Graphic EQ


dbx iEQ-31 Graphic EQ


$554.36


dbx IEQ31 Dual 31 Band Graphic EQLimiter Visionary Design Besides including two 31-band channels of 13-octave equalization, the iEQ-31also offers 12 dB input gain range switchable 6 or 15 dB boostcut range,40mm faders, XLR, 14 and Euroblock inputs and outputs, nonconductivenylon sliders and an intuitive user interface with comprehensive output andgain reduction metering. As always, the inevitable result of our meticulousattention to detail and top-quality componentry is exceptional sound, performance,and reliability.Revolutionary Engineering The iEQ series represents a major step forward in the performance of graphicequalizers. The iEQ series is now able to offer state-of-the-art digital EQ performanceand specs with an analog look and feel. From its amazing 10Hz to22kHz frequency response, to its 113dB dynamic range and Advanced FeedbackSuppression AFS, dbx proprietary Type V noise reduction andPeakStopPlus limiting, the iEQ-31 offers out of this world specifications with adown-to-earth price point. Sure to find a home in the studio, on tour and withinstalled sound venues, the iEQ-31 is destined to take its rightful place in thelineage of great dbx signal processors that are the professionals choice in signalprocessing. With such pristine design and quality, the iEQ-31 offers the maximumsonic flexibility in a straight forward interface and rock-solid construction.Dual 15-band EQ AFS one-touch feedback suppression Type V noise reduction PeakStopPlus limiting Switchable 6 or 15dB boostcut range 12dB input gain range 40mm faders Nonconductive nylon sliders 10Hz to 22kHz frequency response 110dB dynamic range 13-octave Constant Q frequency bands Internal toroidal transformer 14 TRS, XLR, and Euroblock balanced and unbalanced RF-filtered inputs and outputs

Dbx 560A 500 Series Compressor / Limiter


Dbx 560A 500 Series Compressor / Limiter


$199.95


The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to the 900 Series and the 560A continues that tradition.Featuring the same switch-selectable OverEasy and Hard Knee compression curves as the industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! Its also versatile enough to go from subtle compression to “brick wall” peak limiting.Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560A’s Hard Knee compression and high ratios for bombproof protection against overload distortion in digital recording, P.A. systems and broadcast signals.The 560A’s 19-segment, switchable Input/Output LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the dbx 560A’s unique “INFINITY +” inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway mix levels.OverEasy or classic hard knee compression with dbx’ ultra-musical program dependent attack and release timesCompression ratio variable from 1:1 through infinity:1 to -1:1Precise RMS gain reduction and input/output meter displays with calibration control for different operating levelsTrue RMS level detectionExclusive Infinity+ compression using negative ratios

dbx DriveRack PX Powered Speaker Optimizer


dbx DriveRack PX Powered Speaker Optimizer


$131.99


Powered speakers are beautiful things. Everything you need bundled into simple, tidy, portable packages. Just grab em and go, right Well, you may think your powered speaker system is complete, but youre missing half the picture. DriveRack PX is the other half. With the PX, dbx has created a processor specifically tailored for powered speakers. Utilizing dbxs highly acclaimed DriveRack technology, the PX picks up where your powered speakers leave off. The DriveRack PX Powered Speaker Optimizer has everything you need to get the most out of your stereo powered speaker system. It even includes stereo or mono subwoofer support. With the included dbx M2 measurement mic, Auto-EQ corrects for audible deficiencies in the room environment. Dbxs patented Advanced Feedback Suppression AFSTM kills nasty feedback, allowing problem-free operation at higher sound levels, while dbxs patented Subharmonic Synthesizer extends bass response for enhanced bottom end. With all that, you also get classic dbx compression and the protection offered by dbxs graceful PeakStopPlus limiting. Your ears, your audience, and your powered speakers will forever thank you. In spite of all that sophistication, rest assured dbx wont overcomplicate the simplicity of your rig. Dbxs exclusive Setup, Auto-EQ, AFS Wizards, and out-of-the-box support for a host of JBL and other popular powered speakers, make setup a snap. Louder, cleaner, better sound than you thought possible from your powered speakers.Stereo feedback elimination with 12 feedback notch filters Dual 28-band graphic EQ Classic dbx Compressor 120A subharmonic synthesizer Stereo multi-band parametric EQ Stereo PeakStopPlus limiters Pink noise generator Auto-EQ with 28-band RTA JBL and other popular powered speakers included in Setup Wizard dbx M2 measurement mic and zippered pouch included Front panel RTA-Mic XLR inputwith phantom power 25 user programs 25 factory programs 2-channel XLR Input 2-channel XLR Output 2-channel XLR Sub Output 24-bit ADC24-bit DAC, >110 dB dynamic range dbx Type IVTM conversion system Full graphic LCD display

Dbx Driverack Pa2


Dbx Driverack Pa2


$439


The dbx Driverack is one of the most innovative and helpful tools to come along for the live sound engineer in decades. It incorporates crossover, EQ, compression, delay parameters and much more within individual presets. These presets can then be applied to specific rooms, expected environments and applications. The dbx Driverack PA2 incorporates heavily researched and well-considered improvements in the original Driverack system.The DriveRack PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ and AFS algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android, iOS, Mac, or Windows device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.AutoEQNew, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.With the RTA Mic “listening” to your room, the new, updated DriveRack PA2 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.Enhanced AFS Feedback EliminationEnhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system’s tone.Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before it even has a chance, while never altering your sound.

dbx DriveRack PA2


dbx DriveRack PA2


$439


The dbx Driverack is one of the most innovative and helpful tools to come along for the live sound engineer in decades. It incorporates crossover, EQ, compression, delay parameters and much more within individual presets. These presets can then be applied to specific rooms, expected environments and applications. The dbx Driverack PA2 incorporates heavily researched and well-considered improvements in the original Driverack system.The DriveRack PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbxs proprietary AutoEQ and AFS algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android, iOS, Mac, or Windows device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.AutoEQNew, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.With the RTA Mic listening to your room, the new, updated DriveRack PA2 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.Enhanced AFS Feedback EliminationEnhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your systems tone.Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before it even has a chance, while never altering your sound.

DRIVERACKPA2 Complete Loudspeaker Management System


DRIVERACKPA2 Complete Loudspeaker Management System


$523.9


The dbx Driverack is one of the most innovative and helpful tools to come along for the live sound engineer in decades. It incorporates crossover, EQ, compression, delay parameters and much more within individual presets. These presets can then be applied to specific rooms, expected environments and applications. The dbx Driverack PA2 incorporates heavily researched and well-considered improvements in the original Driverack system.Updated Wizard Setup FunctionsUpdated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date. Wizard functions on the DriveRack PA2 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system.Input Processingdbx Compression.AFS (Advanced Feedback Suppression).Graphic EQ.8-Band Parametric EQ (adjusted when using the AutoEQ).Subharmonic Synthesis.Output ProcessingCrossover (supports full range, 2-way, and 3-way systems).8-Band Parametric EQs (used for speaker tunings).dbx Limiting.Driver Alignment Delays.

dbx 223xs Stereo 2-Way/Mono 3-Way Crossover


dbx 223xs Stereo 2-Way/Mono 3-Way Crossover


$158.36


With the dbx 223xs Crossover youll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the worlds finest processors. The dbx 223xs Crossover uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality XLR inputs and outputs. XLR balanced ins and outs Mode switch for stereo 2-way or mono 3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant

dbx 234xs Stereo 2/3 Way, Mono 4-Way Crossover


dbx 234xs Stereo 2/3 Way, Mono 4-Way Crossover


$259


The secret to making speakers sound great lies with the crossover you use. With the dbx 234xs Crossover youll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the worlds finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality XLR inputs and outputs. XLR balanced ins and outs Mode switches for mono 4-way or stereo 2-way3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant

Dbx 234Xs Stereo 2/3 Way, Mono 4-Way Crossover


Dbx 234Xs Stereo 2/3 Way, Mono 4-Way Crossover


$259


The secret to making speakers sound great lies with the crossover you use. With the dbx 234xs Crossover you’ll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world’s finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid “click” controls to the high quality XLR inputs and outputs. XLR balanced ins and outs Mode switches for mono 4-way or stereo 2-way/3-way operation Low frequency summed (subwoofer) output x10 range switch on both channels 40Hz high pass (low cut) filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters (the professional standard) Stereo/Mono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTL/C approved CE compliant

dbx 234s Stereo 2/3 Way Mono 4-Way Crossover


dbx 234s Stereo 2/3 Way Mono 4-Way Crossover


$219


The dbx 234s Stereo 23 Way Mono 4-Way Crossover is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality 14 TRS inputs and outputs. The 234s uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234s leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. TRS differentially balanced ins and outs Mode switches for mono 4-way or stereo 2-way3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant Connectors 14quot TRS Type Electronically balancedunbalanced, RF filtered Impedance Balanced >50k ohm, unbalanced >25k ohm Max Input Level >22dBu balanced or unbalanced CMRR >40dB, typically >50dB at 1kHz

Dbx 223Xs Stereo 2-Way/Mono 3-Way Crossover


Dbx 223Xs Stereo 2-Way/Mono 3-Way Crossover


$199


With the dbx 223xs Crossover you’ll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world’s finest processors. The dbx 223xs Crossover uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid “click” controls to the high quality XLR inputs and outputs. XLR balanced ins and outs Mode switch for stereo 2-way or mono 3-way operation Low frequency summed (subwoofer) output x10 range switch on both channels 40Hz high pass (low cut) filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters (the professional standard) Stereo/Mono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTL/C approved CE compliant

Dbx 234S Stereo 2/3 Way Mono 4-Way Crossover


Dbx 234S Stereo 2/3 Way Mono 4-Way Crossover


$219


The dbx 234s Stereo 2/3 Way Mono 4-Way Crossover is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid “click” controls to the high quality 1/4″ TRS inputs and outputs. The 234s uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234s leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. TRS differentially balanced ins and outs Mode switches for mono 4-way or stereo 2-way/3-way operation Low frequency summed (subwoofer) output x10 range switch on both channels 40Hz high pass (low cut) filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters (the professional standard) Stereo/Mono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTL/C approved CE compliant Connectors: 1/4″ TRS Type: Electronically balanced/unbalanced, RF filtered Impedance: Balanced >50k ohm, unbalanced >25k ohm Max Input Level: >+22dBu balanced or unbalanced CMRR: >40dB, typically >50dB at 1kHz
Advertisement

Comments are closed.