DBX 166A COMP-LMT RACK 12-22-10 Standard

February 5th, 2012 by admin Leave a reply »

Dbx Drive Rack 260 With Rta-M Reference Mic


Dbx Drive Rack 260 With Rta-M Reference Mic


$1099.94


The DriveRack 260 with RTA-M Reference Microphone includes the DriveRack 260 Complete Equalization and Loudspeaker Management System and the DBX RTA-M Reference Microphone. The 260 DriveRack essentially becomes the only device that you will need between the mixer and the power amps. DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application.DriveRack 260 DriveRack 260 Complete Equalization and Loudspeaker Management SystemThe DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI software control provides easy PC-based control.RTA-M Reference MicrophoneThe DBX RTA-M Reference Microphone is omnidirectional, and has a flat frequency response, making it ideal an a measurement microphone. The RTA-M was designed to work with the DBX DriveRack Loudspeaker Management Systems for feedback elimination in venues and studios.Feedback elimination2.7 seconds of alignment and zone delayRS-232 PC GUI Software Interface controlClassic dbx compression and limitingGraphic and parametric EQsAuto-EQ functionFull bandpass, crossover, and routing configurationsAuto gain controlPink noise generator and fulltime RTASetup wizard with JBL speaker and Crown power amplifier tuningsSecurity lockoutWall panel control inputs for permanent installations

Dbx 215S Dual Channel 15-Band Graphic Equalizer


Dbx 215S Dual Channel 15-Band Graphic Equalizer


$179


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 215s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 215s includes two 15-band channels of 2/3-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 215s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 215s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. Dual 15-band, 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of 6 or 12 dB Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inpts and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB

dbx 215s Dual Channel 15-Band Graphic Equalizer


dbx 215s Dual Channel 15-Band Graphic Equalizer


$179


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 215s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 215s includes two 15-band channels of 23-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boostcut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 215s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 215s is destined to take its rightful place in the lineage of great dbx signal processors that are the professionals choice in signal processing. Dual 15-band, 13-octave Constant Q frequency bands Switchable boostcut ranges of 6 or 12 dB Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inpts and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB

dbx 215s Dual Channel 15-Band Graphic Equalizer Regular 888366009116


dbx 215s Dual Channel 15-Band Graphic Equalizer Regular 888366009116


$127.96


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 215s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 215s includes two 15-band channels of 23-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boostcut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 215s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 215s is destined to take its rightful place in the lineage of great dbx signal processors that are the professionals choice in signal processing. Dual 15-band, 13-octave Constant Q frequency bands Switchable boostcut ranges of 6 or 12 dB Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inpts and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB

dbx 131s Single Channel 31-Band Graphic Equalizer


dbx 131s Single Channel 31-Band Graphic Equalizer


$157.52


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 131s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 131s includes a single 31-band channel of 13-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boostcut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 110 dB dynamic range to the quality componentry and meticulous attention to detail, the 131s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 131s is destined to take its rightful place in the lineage of great dbx signal processors that are the professionals choice in signal processing. With such affordable quality, theres no longer any excuse for compromising your sound. Single 31-band, 13-octave Constant Q frequency bands Switchable boostcut ranges of 6 or 12dB 12dB per octave, 3dB down 50Hz low-cut filter Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inputs and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB

dbx 131s Single Channel 31-Band Graphic Equalizer Regular 190839619501


dbx 131s Single Channel 31-Band Graphic Equalizer Regular 190839619501


$143.2


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 131s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 131s includes a single 31-band channel of 13-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boostcut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 110 dB dynamic range to the quality componentry and meticulous attention to detail, the 131s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 131s is destined to take its rightful place in the lineage of great dbx signal processors that are the professionals choice in signal processing. With such affordable quality, theres no longer any excuse for compromising your sound. Single 31-band, 13-octave Constant Q frequency bands Switchable boostcut ranges of 6 or 12dB 12dB per octave, 3dB down 50Hz low-cut filter Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inputs and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB

Used Dbx 131S Single Channel 31-Band Graphic Equalizer


Used Dbx 131S Single Channel 31-Band Graphic Equalizer


$157.52


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 131s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 131s includes a single 31-band channel of 1/3-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 110 dB dynamic range to the quality componentry and meticulous attention to detail, the 131s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 131s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. With such affordable quality, there’s no longer any excuse for compromising your sound. Single 31-band, 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of 6 or 12dB 12dB per octave, 3dB down @ 50Hz low-cut filter Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inputs and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB

Dbx 131S Single Channel 31-Band Graphic Equalizer


Dbx 131S Single Channel 31-Band Graphic Equalizer


$179


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 131s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 131s includes a single 31-band channel of 1/3-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 110 dB dynamic range to the quality componentry and meticulous attention to detail, the 131s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 131s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. With such affordable quality, there’s no longer any excuse for compromising your sound. Single 31-band, 1/3-octave Constant Q frequency bands Switchable boost/cut ranges of 6 or 12dB 12dB per octave, 3dB down @ 50Hz low-cut filter Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inputs and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB

dbx 131s Single Channel 31-Band Graphic Equalizer Regular 190839498496


dbx 131s Single Channel 31-Band Graphic Equalizer Regular 190839498496


$127.96


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 131s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 131s includes a single 31-band channel of 13-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boostcut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 110 dB dynamic range to the quality componentry and meticulous attention to detail, the 131s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 131s is destined to take its rightful place in the lineage of great dbx signal processors that are the professionals choice in signal processing. With such affordable quality, theres no longer any excuse for compromising your sound. Single 31-band, 13-octave Constant Q frequency bands Switchable boostcut ranges of 6 or 12dB 12dB per octave, 3dB down 50Hz low-cut filter Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inputs and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB

dbx 131s Single Channel 31-Band Graphic Equalizer Regular 190839178961


dbx 131s Single Channel 31-Band Graphic Equalizer Regular 190839178961


$127.96


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 131s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The dbx 131s includes a single 31-band channel of 13-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boostcut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 110 dB dynamic range to the quality componentry and meticulous attention to detail, the 131s offers exceptional sound and rugged reliability that guarantees you will always sound your best. Sure to find a home in the studio, on tour and with installed sound venues, the dbx 131s is destined to take its rightful place in the lineage of great dbx signal processors that are the professionals choice in signal processing. With such affordable quality, theres no longer any excuse for compromising your sound. Single 31-band, 13-octave Constant Q frequency bands Switchable boostcut ranges of 6 or 12dB 12dB per octave, 3dB down 50Hz low-cut filter Front panel bypass switch 12 dB input gain range 4-segment LED ladders for monitoring output levels XLR and TRS Inputs and Outputs Frequency Repsonse of 50kHz Dynamic range of greater than 108dB

Dbx 231S Dual Channel 31-Band Graphic Equalizer


Dbx 231S Dual Channel 31-Band Graphic Equalizer


$219


When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 231s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. <BR/> <BR/>The dbx 231s includes two 31-band channels of 1/3-octave equalization, 12 dB input gain, switchable 6 dB or 12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 231s offers exceptional sound and rugged reliability that guarantees you will always sound your best. <BR/> <BR/>Sure to find a home in the studio, on tour and with installed sound venues, the dbx 231s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional's choice in signal processing. With such affordable quality, there's no longer any excuse for compromising your sound. <BR/><ul><li>Dual 31-band, 1/3-octave Constant Q frequency bands </li><li>Switchable boost/cut ranges of 6 or 12 dB </li><li>Front panel bypass switch </li><li>12 dB input gain range </li><li>4-segment LED ladders for monitoring output levels </li><li>XLR and TRS Inpts and Outputs </li><li>Frequency Repsonse of <10Hz to >50kHz </li><li>Dynamic range of greater than 108dB </li></ul>

Dbx 560A 500 Series Compressor / Limiter


Dbx 560A 500 Series Compressor / Limiter


$199.95


The dbx 560A Compressor/Limiter offers legendary VCA-based compression in the increasingly popular 500 Series format. dbx has a much-heralded history with modular processors dating back to the 900 Series and the 560A continues that tradition.Featuring the same switch-selectable OverEasy and Hard Knee compression curves as the industry-standard dbx 160A rackmount processor, the dbx 560A will be your new workhorse compressor! With extremely wide-ranging threshold, ratio and output controls and true RMS level detection providing the most natural-sounding dynamics processing available, the 560A will provide punch to drums, bass, vocals, almost anything! Its also versatile enough to go from subtle compression to “brick wall” peak limiting.Choose low ratios and OverEasy compression to expertly smooth out fluctuating vocal and instrumental levels, or use the 560A’s Hard Knee compression and high ratios for bombproof protection against overload distortion in digital recording, P.A. systems and broadcast signals.The 560A’s 19-segment, switchable Input/Output LEDs and 12-segment Gain Reduction LEDs provide precise analysis at a glance. And, the dbx 560A’s unique “INFINITY +” inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway mix levels.OverEasy or classic hard knee compression with dbx’ ultra-musical program dependent attack and release timesCompression ratio variable from 1:1 through infinity:1 to -1:1Precise RMS gain reduction and input/output meter displays with calibration control for different operating levelsTrue RMS level detectionExclusive Infinity+ compression using negative ratios

Dbx 166A Compressor


Dbx 166A Compressor


$69.99


Save BIG when you buy today!

Dbx 580 Rack Equipment


Dbx 580 Rack Equipment


$119.99


Save BIG when you buy today!

Dbx Dbxzcv-Fire Wall Mount Drive Rack Zone Control


Dbx Dbxzcv-Fire Wall Mount Drive Rack Zone Control


$69


Save BIG when you buy today!

dbx 234s Stereo 2/3 Way Mono 4-Way Crossover Regular 190839151650


dbx 234s Stereo 2/3 Way Mono 4-Way Crossover Regular 190839151650


$159.96


The dbx 234s Stereo 23 Way Mono 4-Way Crossover is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality 14 TRS inputs and outputs. The 234s uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234s leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. TRS differentially balanced ins and outs Mode switches for mono 4-way or stereo 2-way3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant Connectors 14 TRS Type Electronically balancedunbalanced, RF filtered Impedance Balanced >50k ohm, unbalanced >25k ohm Max Input Level >22dBu balanced or unbalanced CMRR >40dB, typically >50dB at 1kHz

dbx 223xs Stereo 2-Way/Mono 3-Way Crossover


dbx 223xs Stereo 2-Way/Mono 3-Way Crossover


$158.36


With the dbx 223xs Crossover youll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the worlds finest processors. The dbx 223xs Crossover uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound. The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency subwoofer output. Everything in the design exudes great precision from the solid click controls to the high quality XLR inputs and outputs. XLR balanced ins and outs Mode switch for stereo 2-way or mono 3-way operation Low frequency summed subwoofer output x10 range switch on both channels 40Hz high pass low cut filter both channels Phase reverse switch on all outputs Individual level controls on all outputs 24dB per octave Linkwitz-Riley filters the professional standard StereoMono status LEDs indicate the selected mode dbx 2 year parts and labor as standard CSA NRTLC approved CE compliant
Advertisement

Comments are closed.