Dbx 120Xp Subharmonic Synthesizer 01/20/2013

June 16th, 2010 by admin Leave a reply »

Dbx 510 Series Subharmonic Synthesizer


Dbx 510 Series Subharmonic Synthesizer


$159


<p>Youve heard dbxs patented Subharmonic Synthesis before. It has provided chest-thumping, teeth-rattling, bone-jarring bass in nightclubs, theatre and film, music recording, live music performance and broadcasting for decades. dbxs Subharmonic Synthesis process produces a new, waveform-modeled bass note, exactly one octave below the bass in the original audio.</p> <p></p> <p>The dbx 510 answers the call of audio professionals everywhere delivering Subharmonic Synthesis in the convenient design of a 500 Series module. The 510s two separate bands of subharmonic synthesis provide smoothness and control, while the independent Low Frequency Boost circuit gets the most out of low frequency speaker systems. Unlike other bass synthesis modules, the dbx process produces musical low frequencies that dont interfere with mid and high-band information, even when the maximum synthesis and boost are applied. The result is a low-end punch that people really feel.</p><p></p> <p>Based on dbx's fabled Subharmonic Synthesizer processors</p> <p>Simple, intuitive interface</p> <p>Synthesized frequency level indicator LEDs</p> <p>Individual controls for two ranges of subharmonic frequencies</p> <p>Subharmonics level control</p> <p>Synthesis Bypass switch</p> <p></p>

dbx 510 Series Subharmonic Synthesizer


dbx 510 Series Subharmonic Synthesizer


$139.92


Youve heard dbxs patented Subharmonic Synthesis before. It has provided chest-thumping, teeth-rattling, bone-jarring bass in nightclubs, theatre and film, music recording, live music performance and broadcasting for decades. dbxs Subharmonic Synthesis process produces a new, waveform-modeled bass note, exactly one octave below the bass in the original audio. The dbx 510 answers the call of audio professionals everywhere delivering Subharmonic Synthesis in the convenient design of a 500 Series module. The 510s two separate bands of subharmonic synthesis provide smoothness and control, while the independent Low Frequency Boost circuit gets the most out of low frequency speaker systems. Unlike other bass synthesis modules, the dbx process produces musical low frequencies that dont interfere with mid and high-band information, even when the maximum synthesis and boost are applied. The result is a low-end punch that people really feel. Based on dbxs fabled Subharmonic Synthesizer processors Simple, intuitive interface Synthesized frequency level indicator LEDs Individual controls for two ranges of subharmonic frequencies Subharmonics level control Synthesis Bypass switch

Used Dbx 510 Series Subharmonic Synthesizer


Used Dbx 510 Series Subharmonic Synthesizer


$139.92


Youve heard dbxs patented Subharmonic Synthesis before. It has provided chest-thumping, teeth-rattling, bone-jarring bass in nightclubs, theatre and film, music recording, live music performance and broadcasting for decades. dbxs Subharmonic Synthesis process produces a new, waveform-modeled bass note, exactly one octave below the bass in the original audio. The dbx 510 answers the call of audio professionals everywhere delivering Subharmonic Synthesis in the convenient design of a 500 Series module. The 510s two separate bands of subharmonic synthesis provide smoothness and control, while the independent Low Frequency Boost circuit gets the most out of low frequency speaker systems. Unlike other bass synthesis modules, the dbx process produces musical low frequencies that dont interfere with mid and high-band information, even when the maximum synthesis and boost are applied. The result is a low-end punch that people really feel. Based on dbx’s fabled Subharmonic Synthesizer processors Simple, intuitive interface Synthesized frequency level indicator LEDs Individual controls for two ranges of subharmonic frequencies Subharmonics level control Synthesis Bypass switch

dbx DriveRack PX Powered Speaker Optimizer


dbx DriveRack PX Powered Speaker Optimizer


$131.99


Powered speakers are beautiful things. Everything you need bundled into simple, tidy, portable packages. Just grab em and go, right Well, you may think your powered speaker system is complete, but youre missing half the picture. DriveRack PX is the other half. With the PX, dbx has created a processor specifically tailored for powered speakers. Utilizing dbxs highly acclaimed DriveRack technology, the PX picks up where your powered speakers leave off. The DriveRack PX Powered Speaker Optimizer has everything you need to get the most out of your stereo powered speaker system. It even includes stereo or mono subwoofer support. With the included dbx M2 measurement mic, Auto-EQ corrects for audible deficiencies in the room environment. Dbxs patented Advanced Feedback Suppression AFSTM kills nasty feedback, allowing problem-free operation at higher sound levels, while dbxs patented Subharmonic Synthesizer extends bass response for enhanced bottom end. With all that, you also get classic dbx compression and the protection offered by dbxs graceful PeakStopPlus limiting. Your ears, your audience, and your powered speakers will forever thank you. In spite of all that sophistication, rest assured dbx wont overcomplicate the simplicity of your rig. Dbxs exclusive Setup, Auto-EQ, AFS Wizards, and out-of-the-box support for a host of JBL and other popular powered speakers, make setup a snap. Louder, cleaner, better sound than you thought possible from your powered speakers.Stereo feedback elimination with 12 feedback notch filters Dual 28-band graphic EQ Classic dbx Compressor 120A subharmonic synthesizer Stereo multi-band parametric EQ Stereo PeakStopPlus limiters Pink noise generator Auto-EQ with 28-band RTA JBL and other popular powered speakers included in Setup Wizard dbx M2 measurement mic and zippered pouch included Front panel RTA-Mic XLR inputwith phantom power 25 user programs 25 factory programs 2-channel XLR Input 2-channel XLR Output 2-channel XLR Sub Output 24-bit ADC24-bit DAC, >110 dB dynamic range dbx Type IVTM conversion system Full graphic LCD display

Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System


Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System


$454.99


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Black


Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Black


$639


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

dbx DriveRack 260 Complete Equalization and Loudspeaker Control System


dbx DriveRack 260 Complete Equalization and Loudspeaker Control System


$562.32


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters to provide protection against speaker blowouts, and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Regular 190839685971


Used Dbx Driverack 260 Complete Equalization And Loudspeaker Control System Regular 190839685971


$511.2


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

dbx DriveRack 260 Complete Equalization and Loudspeaker Control System Regular 1


dbx DriveRack 260 Complete Equalization and Loudspeaker Control System Regular 1


$511.2


Designed to be the only device necessary between the mixer and the power amps, DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application. The DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters to provide protection against speaker blowouts, and alignment delay. Setup Wizard gets you up and running quickly and GUI control provides easy PC-based control. Click on the PDF link below for more complete details on this powerful PA control system.Feedback elimination 2.7 seconds of alignment and zone delay RS-232 PC GUI control Classic dbx compression and limiting Graphic and parametric EQs Auto-EQ function Full bandpass, crossover, and routing configurations Auto gain control Pink noise generator and fulltime RTA Setup wizard with JBL speaker and Crown power amplifier tunings Security lockout Wall panel control inputs for permanent installations

Dbx Drive Rack 260 With Rta-M Reference Mic


Dbx Drive Rack 260 With Rta-M Reference Mic


$1099.94


The DriveRack 260 with RTA-M Reference Microphone includes the DriveRack 260 Complete Equalization and Loudspeaker Management System and the DBX RTA-M Reference Microphone. The 260 DriveRack essentially becomes the only device that you will need between the mixer and the power amps. DriveRacks are all-inclusive loudspeaker management systems versatile enough to suit any sound reinforcement, monitoring, or install application.DriveRack 260 DriveRack 260 Complete Equalization and Loudspeaker Management SystemThe DriveRack 260 offers 2 independent channels of processing power with a linkable 28-band graphic EQ, industry-standard dbx stereo compressor module, feedback eliminator, and the 120A Subharmonic Synthesizer on the input signal path. 6-channel output system includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts), and alignment delay. Setup Wizard gets you up and running quickly and GUI software control provides easy PC-based control.RTA-M Reference MicrophoneThe DBX RTA-M Reference Microphone is omnidirectional, and has a flat frequency response, making it ideal an a measurement microphone. The RTA-M was designed to work with the DBX DriveRack Loudspeaker Management Systems for feedback elimination in venues and studios.Feedback elimination2.7 seconds of alignment and zone delayRS-232 PC GUI Software Interface controlClassic dbx compression and limitingGraphic and parametric EQsAuto-EQ functionFull bandpass, crossover, and routing configurationsAuto gain controlPink noise generator and fulltime RTASetup wizard with JBL speaker and Crown power amplifier tuningsSecurity lockoutWall panel control inputs for permanent installations

dbx goRack Performance Processor


dbx goRack Performance Processor


$29


A small and inexpensive speaker processor that will result in unprecedented performance from your existing powered speaker system. Based on dbxs DriveRack Series, the goRack provides Anti-Feedback, Compression, Sub-Harmonic Synth and EQ. Each processing function is enabled or disabled via top-level function buttons, and settings can be adjusted via goRack large data wheel.goRack rear panel features combination 14XLR inputs that can be connected to mixer outputs or to microphones directly. When using a mic, the goRacks MicLine switch selects the proper input sensitivity and gain range while dual gain controls on the top provide independent level adjustment. goRack 18 Aux input allows for direct connection of mobile music players while XLR outputs interface with powered speakers. The goRack is perfect for applications from a mixer, or with its dual XLR inputs and Aux input, it can be used as a standalone performance processormixer for the solo artist.Feedback supressionMake annoying and potentially painful audio feedback a thing of the past with the goRacks simple-to-use, Anti-Feedback processing. Based on dbxs industry-leading AFS Advanced Feedback Suppression algorithm, the goRack makes eliminating system feedback a snap. Simply press the goRacks Anti-Feedback function button and use the Data Wheel to adjust the settings. The goRack listens for, anticipates and removes feedback automatically without altering your sound.CompressionControl dynamics and fine-tune your system with the straightforward Compressor feature based on the legendary dbx 163 Compressor. Minimize peaks and level out variances in your audio source material with goRack intuitive Compressor feature.Sub-harmonic synthgoRacks Sub Synth feature is the perfect tool for adding extra bass to your system. For decades, dbxs patented Subharmonic Synthesis has been the secret weapon usCompact Form FactorAnti-Feedback Processing based on the dbx AFS Advanced Feedback Suppression algorithmdbx Compression based on the dbx 163Subharmonic SynthesisEQ 20 Musical Genre-Based 31-Band Graphic EQ SettingsDual dbx Microphone PreampLine InputsSelectable MicLine Input SettingsStereo Inputs and OutputsCombination MicLine Input Jacks and XLR Outputs18quot Stereo Aux Input for Mobile Music PlayersDevicesIndependent Left and Right Channel Volume Controls

dbx 120A Subharmonic Synth


dbx 120A Subharmonic Synth


$175.96


The dbx 120A Subharmonic Synth delivers the throbbing low-end bass you want. It produces new, Waveform Modeled bass notes an octave below the bass in the original audio-smooth, musical, and floor-shaking even when output at system levels well below system and hearing damage thresholds. Provides 14 and RCA input connectors along with balanced 14 main outputs which can be full range including synthesis or HF only, plus a separate subwoofer output with level control.Individual control for two ranges of subharmonic frequencies Separate low-frequency boost circuit Separate subwoofer output 14 balanced inputs and outputs RCA input connectors Front-panel LEDs show crossover status and synthesis activity Patented circuitry ensures that mid and high frequencies are not affected Built-in crossover with choice of 80Hz or 120Hz crossover point Enhance bass audio material for use in such applications as nightclub and dance mixing, theater and film sound, music recording, live music performance, and broadcasting

DRIVERACKPA2 Complete Loudspeaker Management System


DRIVERACKPA2 Complete Loudspeaker Management System


$523.9


The dbx Driverack is one of the most innovative and helpful tools to come along for the live sound engineer in decades. It incorporates crossover, EQ, compression, delay parameters and much more within individual presets. These presets can then be applied to specific rooms, expected environments and applications. The dbx Driverack PA2 incorporates heavily researched and well-considered improvements in the original Driverack system.Updated Wizard Setup FunctionsUpdated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date. Wizard functions on the DriveRack PA2 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system.Input Processingdbx Compression.AFS (Advanced Feedback Suppression).Graphic EQ.8-Band Parametric EQ (adjusted when using the AutoEQ).Subharmonic Synthesis.Output ProcessingCrossover (supports full range, 2-way, and 3-way systems).8-Band Parametric EQs (used for speaker tunings).dbx Limiting.Driver Alignment Delays.

Dbx Driverack Venu360 Speaker Management System


Dbx Driverack Venu360 Speaker Management System


$869


The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’ proprietary AutoEQ and AFS algorithms, additional input channels, ethernet control via an Android, iOS, Mac, or Windows device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.AutoEQNew, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.With a RTA Mic listening to your room, the updated DriveRack VENU360 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds using sine sweeps. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.The AutoEQ is now located in the output processing stage, which means independent sections of a system can be equalized automatically. This allows AutoEQ to be used on the FOH system as well as the stage monitors, zones and tower delays!Enhanced AFS Feedback Elimination Enhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system’ tone.Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack VENU360 listens for and anticipates feedback and automatically removes it before it even has a chance, while never altering your sound.Updated Wizard Setup FunctionsUpdated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date.Wizard functions in the DriveRack VENU360 guide you throughInput Processingdbx CompressionAFS (Advanced Feedback Suppression)31-Band Graphic EQ12-Band Parametric EQ (with narrow notch capabilities)Subharmonic SynthesisBackline DelayNoise GateOutput ProcessingCrossover (supports full range up to mono 6-way systems)12-Band AutoEQs (8 AutoEQ bands, 4 User bands)dbx CompressionAutomatic Gain ControlSubharmonic SynthesisNoise GateTower Delays (up to 1000ms per output)8-Band Parametric EQs (used for speaker tunings)dbx LimitingDriver Alignment DelaysTested Wireless RoutersDlink 636LDlink Cloud router 2000Cisco / linksys: WRT54G2V1Netgear WGR614 v7Netgear WNR 1000

Dbx Driverack Pa2


Dbx Driverack Pa2


$439


The dbx Driverack is one of the most innovative and helpful tools to come along for the live sound engineer in decades. It incorporates crossover, EQ, compression, delay parameters and much more within individual presets. These presets can then be applied to specific rooms, expected environments and applications. The dbx Driverack PA2 incorporates heavily researched and well-considered improvements in the original Driverack system.<BR/><BR/>The DriveRack PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx's proprietary AutoEQ and AFS algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android, iOS, Mac, or Windows device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.<BR/><BR/><strong>AutoEQ</strong><BR/>New, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.<BR/><BR/>With the RTA Mic “listening” to your room, the new, updated DriveRack PA2 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.<BR/><BR/><strong>Enhanced AFS Feedback Elimination</strong><BR/>Enhanced AFS algorithm for faster, more precise feedback elimination, without adversely affecting your system's tone.<BR/><BR/>Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before it even has a chance, while never altering your sound.<BR/><BR/><strong<ul><li>All New Setup Wizard</li><li>Streamlined AutoEQ</li><li>All New AFS (Advanced Feedback Suppression)</li><li>Mobile Control (Android, iOS, Mac, Windows)</li><li>dbx Compression</li><li>Graphic EQ</li><li>8-Band Parametric EQ (adjusted when using the AutoEQ) Input</li><li>Subharmonic Synthesis</li><li>Crossover (supports full range, 2-way, and 3-way systems)</li><li>8-Band Parametric EQs (used for speaker tunings) Output</li><li>dbx Limiting</li><li>Driver Alignment Delays</li></ul>

Sacrifist


Sacrifist


$7.99


Praxis ~ Sacrifist

Valis, Vol. 1: Destruction of Syntax


Valis, Vol. 1: Destruction of Syntax


$1.99


Various Artists ~ Valis, Vol. 1: Destruction of Syntax

Dbx 266A Compressor


Dbx 266A Compressor


$59.99


Save BIG when you buy today!

Dbx 3031 Equalizer


Dbx 3031 Equalizer


$119.99


Save BIG when you buy today!

Dbx 266Xl Compressor


Dbx 266Xl Compressor


$59.99


Save BIG when you buy today!

Dbx Driverack Pa Dbxpav Equalizer


Dbx Driverack Pa Dbxpav Equalizer


$349.99


Save BIG when you buy today!

Dbx 166A Compressor


Dbx 166A Compressor


$69.99


Save BIG when you buy today!

Dbx Db12 Active Direct Box Black


Dbx Db12 Active Direct Box Black


$114


The dbx dB12 is an active direct box that utilizes custom dbx mu-metal-shielded audio transformers, high-quality Neutrik connectors, and low-noise circuitry. The dB12 direct box includes a pad switch that accommodates instrument, line, and even speaker level signals. Take even more control of your sound by utilizing the dB12 direct box's polarity invert switch to set the phase relationship between the direct and mic'd sound. <BR/> <BR/>As a professional, you don't have time for interference, so dbx includes a ground lift switch in the dB12 active direct box to solve potential hum and buzz problems due to ground loops. And between the combined shielding of the cast metal chassis and the custom-wound transformer, you can be doubly assured of a clean signal free from interference. All of this sits atop a solid, stable footprint, that will keep the dB12 direct box from being dragged around the stage. Unique contoured underside allows secure stacking of multiple dbx dB12 Active Direct Box units. <BR/><b>Input Section</b> <BR/>Input: 1 instrument/line/speaker level <BR/>Connector: 1/4″ jack <BR/>Type: Unbalanced, RF filtered <BR/>Impedance: 1M Ohm (0dB pad) <BR/>47k Ohm (20dB pad) <BR/>47k Ohm (40dB pad) <BR/>Max Input Level: +10dBu (0dB pad) <BR/>+30dBu (20dB pad) <BR/>+50dBu (40dB pad) <BR/> <BR/><b>Output Section</b> <BR/>Thru Output: 1 parallel connection from input jack <BR/>Connector: 1/4″ jack <BR/>Type: Unbalanced, RF filtered <BR/>Main Output: 1 line level <BR/>Connector: XLR male jack <BR/>Type: Balanced <BR/>Impedance: 150 Ohm typical <BR/>Max Output Level: +8dBu into 600 Ohm <BR/> <BR/><b>Performance</b> <BR/>Transformer: Custom dbx mu-metal-shielded <BR/>Frequency Response: 20Hz to 20kHz, 3dB <BR/>30Hz to 20kHz, +0/-1dB <BR/>Noise: <-105dB unweighted, 22kHz BW <BR/>THD: <0.01%, 20Hz to 20kHz BW <BR/><0.005%, 1kHz, 0dBu output <BR/> <BR/><b>General</b> <BR/>Current Drain Phantom: < 8mA <BR/>Phantom Power Range: +48 volts DC <BR/>Dimensions: 5.82″ L X 5.44″ W X 2.20″ H (148 x 138 x 56mm) <BR/>Weight: 1.4 lbs / 0.65 kg <BR/>

Dbx Zc-4 Wall Mount Zone Control


Dbx Zc-4 Wall Mount Zone Control


$99.95


The Zone Controllers, like this ZC-4, offer extended utility to the DriveRack and ZonePRO families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1,000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor.<br><br>The ZC-4 provides program change capability from contact closures for the DriveRack 220i and 260; it can also provide source selection, page steering, or scene selection for ZonePRO devices.<br>

Dbx 150 Noise Gate


Dbx 150 Noise Gate


$69.99


Save BIG when you buy today!

Dbx 166 Compressor


Dbx 166 Compressor


$69.99


Save BIG when you buy today!

Dbx Dbxzc2v Wall Mount Zone Control With Mute


Dbx Dbxzc2v Wall Mount Zone Control With Mute


$59


Save BIG when you buy today!
Advertisement

Comments are closed.