DB TECHNOLOGIES OPERA LYRIC 212 AVAIL 01.19.11 Standard

October 25th, 2011 by admin Leave a reply »

Standard Spines and 3-Manifolds


Standard Spines and 3-Manifolds


$14.8


Standard Spines and 3-Manifolds

9009 Woven Jacquards Fabric, Graphite


9009 Woven Jacquards Fabric, Graphite


$51.32


Cleaning Instruction:Clean fabrics with water-based cleaning agents only do not use solventsSpecificationsColor: GraphiteAbrasion: Exceeds 40,000 Double RubsBacking Content: 100% Acrylic Kiss CoatConstruction: Woven JacquardsContent: 100% PolyesterCrocking: AATCC 8: Wet Class 4.5 AATCC 8: Dry Class 4.5Fire Retardancy: UFAC Class 1 NFPA 260 Class 1 California Bulletin 117-Section EPilling: Passes ASTM D3511 Class 5Repeat Length: 26.5" Up the RollRepeat Width: 14.0" Across the RollSeam Slippage: Passes Seam Slippage ASTM-D4034. F128 x W165 LBFTearstrength: Passes ASTM D2261 - Warp 34 lbs & Fill 73 lbs Tensilestrength: Passes ASTM D5034 - Warp 382 lbs & Fill 490 lbs Railroaded: Not RailroadedWidth: 55"Weight: 16.59 oz per Linear Yard, 10.86 oz Per Square Yard

205 Woven Jacquards Fabric, Hemlock


205 Woven Jacquards Fabric, Hemlock


$29.51


Cleaning Instruction:Clean fabrics with water-based cleaning agents only do not use solventsSpecificationsColor: HemlockAbrasion: Exceeds 40,000 Double RubsBacking Content: 100% Acrylic Kiss CoatConstruction: Woven JacquardsContent: 100% PolyesterCrocking: AATCC 8: Wet Class 4.5 AATCC 8: Dry Class 4.5Fire Retardancy: UFAC Class 1 NFPA 260 Class 1 California Bulletin 117-Section EPilling: Passes ASTM D3511 Class 5Repeat Length: 26.5" Up the RollRepeat Width: 14.0" Across the RollSeam Slippage: Passes Seam Slippage ASTM-D4034. F128 x W165 LBFTearstrength: Passes ASTM D2261 - Warp 34 lbs & Fill 73 lbs Tensilestrength: Passes ASTM D5034 - Warp 382 lbs & Fill 490 lbs Railroaded: Not RailroadedWidth: 55"Weight: 16.59 oz per Linear Yard, 10.86 oz Per Square Yard

3003 Woven Jacquards Fabric, Re Blued


3003 Woven Jacquards Fabric, Re Blued


$29.51


Cleaning Instruction:Clean fabrics with water-based cleaning agents only do not use solventsSpecificationsColor: Re BluedAbrasion: Exceeds 40,000 Double RubsBacking Content: 100% Acrylic Kiss CoatConstruction: Woven JacquardsContent: 100% PolyesterCrocking: AATCC 8: Wet Class 4.5 AATCC 8: Dry Class 4.5Fire Retardancy: UFAC Class 1 NFPA 260 Class 1 California Bulletin 117-Section EPilling: Passes ASTM D3511 Class 5Repeat Length: 26.5" Up the RollRepeat Width: 14.0" Across the RollSeam Slippage: Passes Seam Slippage ASTM-D4034. F128 x W165 LBFTearstrength: Passes ASTM D2261 - Warp 34 lbs & Fill 73 lbs Tensilestrength: Passes ASTM D5034 - Warp 382 lbs & Fill 490 lbs Railroaded: Not RailroadedWidth: 55"Weight: 16.59 oz per Linear Yard, 10.86 oz Per Square Yard

306 Woven Jacquards Fabric, Navy


306 Woven Jacquards Fabric, Navy


$29.51


Cleaning Instruction:Clean fabrics with water-based cleaning agents only do not use solventsSpecificationsColor: NavyAbrasion: Exceeds 40,000 Double RubsBacking Content: 100% Acrylic Kiss CoatConstruction: Woven JacquardsContent: 100% PolyesterCrocking: AATCC 8: Wet Class 4.5 AATCC 8: Dry Class 4.5Fire Retardancy: UFAC Class 1 NFPA 260 Class 1 California Bulletin 117-Section EPilling: Passes ASTM D3511 Class 5Repeat Length: 26.5" Up the RollRepeat Width: 14.0" Across the RollSeam Slippage: Passes Seam Slippage ASTM-D4034. F128 x W165 LBFTearstrength: Passes ASTM D2261 - Warp 34 lbs & Fill 73 lbs Tensilestrength: Passes ASTM D5034 - Warp 382 lbs & Fill 490 lbs Railroaded: Not RailroadedWidth: 55"Weight: 16.59 oz per Linear Yard, 10.86 oz Per Square Yard

105 Woven Jacquards Fabric, Orchid


105 Woven Jacquards Fabric, Orchid


$26.23


Cleaning Instruction:Clean fabrics with water-based cleaning agents only do not use solventsSpecificationsColor: OrchidAbrasion: Exceeds 40,000 Double RubsBacking Content: 100% Acrylic Kiss CoatConstruction: Woven JacquardsContent: 100% PolyesterCrocking: AATCC 8: Wet Class 4.5 AATCC 8: Dry Class 4.5Fire Retardancy: UFAC Class 1 NFPA 260 Class 1 California Bulletin 117-Section EPilling: Passes ASTM D3511 Class 5Repeat Length: 26.5" Up the RollRepeat Width: 14.0" Across the RollSeam Slippage: Passes Seam Slippage ASTM-D4034. F128 x W165 LBFTearstrength: Passes ASTM D2261 - Warp 34 lbs & Fill 73 lbs Tensilestrength: Passes ASTM D5034 - Warp 382 lbs & Fill 490 lbs Railroaded: Not RailroadedWidth: 55"Weight: 16.59 oz per Linear Yard, 10.86 oz Per Square Yard

26-47409 Fine Tunes Bird Food - 5 lbs.


26-47409 Fine Tunes Bird Food – 5 lbs.


$17.73


FeaturesLyric Fine Tunes Bird FoodA No Waste, Shell Free Nut Mix For Small Beak BirdsBagDimension – 6 x 5 x 7 in.Item weight – 5 lbs.

44 Woven Jacquards Fabric, Freesia


44 Woven Jacquards Fabric, Freesia


$29.51


Cleaning Instruction:Clean fabrics with water-based cleaning agents only do not use solventsSpecificationsColor: FreesiaAbrasion: Exceeds 40,000 Double RubsBacking Content: 100% Acrylic Kiss CoatConstruction: Woven JacquardsContent: 100% PolyesterCrocking: AATCC 8: Wet Class 4.5 AATCC 8: Dry Class 4.5Fire Retardancy: UFAC Class 1 NFPA 260 Class 1 California Bulletin 117-Section EPilling: Passes ASTM D3511 Class 5Repeat Length: 26.5" Up the RollRepeat Width: 14.0" Across the RollSeam Slippage: Passes Seam Slippage ASTM-D4034. F128 x W165 LBFTearstrength: Passes ASTM D2261 - Warp 34 lbs & Fill 73 lbs Tensilestrength: Passes ASTM D5034 - Warp 382 lbs & Fill 490 lbs Railroaded: Not RailroadedWidth: 55"Weight: 16.59 oz per Linear Yard, 10.86 oz Per Square Yard

11 Woven Jacquards Fabric, Lilac


11 Woven Jacquards Fabric, Lilac


$29.51


Cleaning Instruction:Clean fabrics with water-based cleaning agents only do not use solventsSpecificationsColor: LilacAbrasion: Exceeds 40,000 Double RubsBacking Content: 100% Acrylic Kiss CoatConstruction: Woven JacquardsContent: 100% PolyesterCrocking: AATCC 8: Wet Class 4.5 AATCC 8: Dry Class 4.5Fire Retardancy: UFAC Class 1 NFPA 260 Class 1 California Bulletin 117-Section EPilling: Passes ASTM D3511 Class 5Repeat Length: 26.5" Up the RollRepeat Width: 14.0" Across the RollSeam Slippage: Passes Seam Slippage ASTM-D4034. F128 x W165 LBFTearstrength: Passes ASTM D2261 - Warp 34 lbs & Fill 73 lbs Tensilestrength: Passes ASTM D5034 - Warp 382 lbs & Fill 490 lbs Railroaded: Not RailroadedWidth: 55"Weight: 16.59 oz per Linear Yard, 10.86 oz Per Square Yard

26-47432 Wild Bird Mix - 5 lbs.


26-47432 Wild Bird Mix – 5 lbs.


$14.68


FeaturesLyric Wild Bird MixAll Seed Eating Birds Are AttractedDimension – 14 x 9.5 x 2 in.Item weight – 5 lbs.

WatchGuard WGM37073 M370 High Avail with 3Y Standard Support


WatchGuard WGM37073 M370 High Avail with 3Y Standard Support


$1910.7


FeaturesHigh availabilitySecurity appliance8 portsSpecificationsHumidity Range Operating: 10 - 85% (non-condensing)Max Operating Temperature: 104 °FMin Operating Temperature: 32 °FNominal Voltage: AC 120/230 VPower Consumption Operational: 75 WattVoIP: YesVoIP Protocols: H.323 , SIP

ISP Technologies Vector 212 400W 2x12 Powered Extension Speaker Cab Standard


ISP Technologies Vector 212 400W 2×12 Powered Extension Speaker Cab Standard


$1699


ISP Technologies Vector 212 is an active two-channel guitar amplification system with a 100W guitar amplifier channel delivering power to a Celestion G12T-75 guitar speaker and a second channel delivering 300 watts RMS to an internal tuned 12-inch subwoof

Cabin Flounder


Cabin Flounder


$7.99


Fetchin Bones ~ Cabin Flounder

LP-3CV-072-01 Listen 3-Channel RF Value Package 72 MHz


LP-3CV-072-01 Listen 3-Channel RF Value Package 72 MHz


$1001.21


Listen’s LP-3CV-072 Value Package offers economic value for meeting your assistive listening needs backed by Listen’s exceptional service and support. The package is easy to use and is ideal for houses of worship, classrooms, theatres, employee trainings, business meetings, and much more. Open up a world of communication so everyone can have the opportunity to clearly hear your message.FeaturesEconomical price backed by Listen’s exceptional service and support.Three channels makes it simple to install, manage and use.Reliable clear sound quality – 62 dB SNR.Ensures public venues meet ADA requirements.30-day no obligation demonstrations available.Includes(1) LT-803-072 Stationary 3-Channel RF Transmitter.(1) LA-123 90° Helical Antenna (72 MHz).(4) LR-200-072 Standard 3-Channel RF Receiver.(4) LA-161 Single Ear Bud.(1) LA-304 Assistive Listening Notification Signage Kit.SpecificationsRFRF Channel Range – (A) 72.100, (E) 72.900, (H) 75.900.Number of Channels – 3 wide band.System Range – 600 ft. (with LA-123 antenna).Compliance – FCC Part 15, Industry Canada, RoHS.AudioSystem Frequency Response – 50 Hz – 15 kHz (±3 dB).System Signal-to-Noise Ratio (A-Weighted) – 62 dB.System Distortion – <2% total harmonic distortion (THD) at 80% deviation.

LSTN-LS-45 Classic Level II Stationary RF System 72 MHz


LSTN-LS-45 Classic Level II Stationary RF System 72 MHz


$2143.7


The LS-45 has everything you need for an easy system to specify, install, operate, and meet legislative requirements for assistive listening. Great for larger venues to deliver an optimum range of up to 1,500 ft. 457.2m. Offers 17 wide band 100% digital channels - Listen receivers are digitally-tuned so the transmission wont drift. SQ Super Quiet Companding Technology delivers 20 dB less hiss than any competitor. Universal inputs on the transmitter ensures venues can use the LS-45 with their preferred audio source&#59; mixer, microphone, iPod or CD. Use this system for auditory assistance, audio-video recording feed and press feeds. Great for schools, houses of worship, stadiums, and courtrooms. FeaturesEnsures public venues deliver an enriched listening experience while meeting new legislative requirements for assistive listeningSuperior audio quality - 80 dB signal-to-noise ratio, setting the industrys sound quality standardOffers 17 wide band 100% digital channels - Listen receivers are digitally-tuned so the transmission wont driftLong transmission range ensures coverage for the entire venueSpecificationsFrequency: 72 MHz

STCH-M210 Model 210 Announcers Console


STCH-M210 Model 210 Announcers Console


$1126.26


The Studio Technologies Model 210 Announcer's Console is an audio control "hub" for announcers, commentators, and production personnel. Compatible with essentially all broadcast and production audio system environments, the tabletop unit is often used for on-air sports broadcasting. Ease of use, configuration flexibility, and sonic excellence are some of the unit's highlights. The Model 210 is compatible with most broadcast and audio system environments. Standard connectors are used to interface microphone, headphone, talkback, and IFB signals. Whether it's microphone switching, talkback output, or headphone cue feed, superior audio quality is maintained. A microprocessor provides the Model 210's logic power, allowing exacting control of the unit's operation. A range of configuration choices allow the desired operating parameters to be easily selected. While flexible, the user is presented with an easy-to-use set of controls and indicators. A high-performance microphone preamplifier circuit provides low-noise/low-distortion amplification over a 20 to 60 dB gain range. The gain is adjustable in 10 dB steps. The input is compatible with balanced dynamic or condenser microphones. The microphone power source is 48 V nominal and meets the worldwide P48 phantom power standard. The preamplifier's gain can also be set for 0 dB, allowing a line-level audio signal to be connected. This could prove useful in special applications such as when an external preamp or mic processor is being used. FeaturesMicrophone preamp with selectable gain and 48 volt phantom powerBroadcast IFB inputTwo pushbutton switches offer programmable "click-free" audio path controlTransformer-balanced main outputLine-level talkback outputStereo headphone monitoringTwo rotary headphone output level controlsMicrocontroller-directed audio routingPowered by IFB or by external DC sourceAll configuration switches accessible via the bottom of the enclosureMicrophone Input/PreamplifierType electronically balancedInput Impedance 2 k ohms, nominalGain Range 20 to 60 dB, nominal, adjustable in 10 dB stepsCompatibility dynamic or phantom-powered micsPhantom Power 48 Vdc, nominal, meets IEC 61938IFB InputType 2-channel, unbalanced (pin 1 common&#59; pin 2 DC with channel 1 audio&#59; pin 3 channel 2 audio)Impedance 10 k ohms, nominalNominal Level -10 dBuOptional Line Inputs: 2Type balanced, transformer-coupledImpedance 10 k ohms, nominalNominal Level +4 dBuTalkback OutputType transformer-coupled with series capacitors and isolation resistorsImpedance 600 ohms, nominalNominal Level +4 dBuMaximum Level +11 dBu (compressor restricts maximum)Headphone Output: 1, binaural (stereo)Compatibility intended for connection to mono or stereo headphones or headsets with nominal impedance of 100 ohms or greaterPower SourcesIFB 24-32 Vdc, 105 mAExternal 24 Vdc nominal, 70 mA&#59; acceptable range 20-30 Vdc. All units include a universal input/24 Vdc output power supply.SpecificationsModel: 210Weight: 6 lbs

STCH-M204 Model 204 Announcers Console


STCH-M204 Model 204 Announcers Console


$1249.52


The Model 204 Announcer's Console offers a unique combination of analog and digital audio resources for use in broadcast sports, eSports, live event, entertainment, and streaming broadcast applications. The unit is housed in a compact, rugged steel enclosure that's intended for table-top use. Calling the Model 204 "cute" or "cool" would be accurate, its nicely proportioned but diminutive size makes it ideal for use in space-constrained locations. The Model 204 supports Dante audio-over-Ethernet digital media technology with AES67 compatibility for integration into contemporary applications. The unit is extremely simple to deploy, is "pro" quality throughout, and provides an intuitive user experience. The Model 204's audio quality is excellent, with low distortion, low noise, and ample headroom. Careful circuit design and rugged components ensure long, reliable operation. FeaturesDante audio-over-Ethernet technologyDigital audio and direct-microphone outputsOne main and one talkback output channelHighly-flexible 2-channel headphone outputCompact unit supports one on-air locationExcellent audio qualityUses STcontroller for configurationPower-over-Ethernet (PoE) poweredNetwork Audio TechnologyType: Dante audio-over-EthernetAES67-2013 Support: yesDante Domain Manager (DDM) Support: yesBit Depth: up to 24Sample Rate: 44.1 and 48 kHzNumber of Transmitter (Output) Channels: 2 (main, talkback)Number of Receiver (Input) Channels: 4 (Headphone Ch1,Headphone Ch2, Headphone Ch3, Headphone Ch4)Dante Audio Flows: 4&#59; 2 transmitter, 2 receiverNetwork InterfaceType: 100BASE-TX, twisted-pair Ethernet, Power-over-Ethernet (PoE) supportedData Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s "GigE" Ethernet not supported)Microphone InputCompatibility: dynamic or phantom-powered microphonesType: balanced, capacitive coupledImpedance: 2 k ohms, nominalGain: 35, 43, 52, 59 dB, selectableFrequency Response: 25 Hz to 20 kHz, -3 dBDistortion (THD+N): <0.022%, measured at 35 dB of gainDynamic Range: 96 dB, A-weightedPhantom Power: P48 per IEC 61938 standard, on/off selectable with status LEDHeadphone OutputType: 2-channel (stereo)Compatibility: intended for connection to stereo (dual-channel) or monaural (single-channel) headphones, headsets, or earpieces with nominal impedance of 50 ohms or greaterMaximum Output Voltage: 3.8 Vrms, 1 kHz, 150 ohm loadFrequency Response: 20 Hz to 20 kHz, -2 dBDistortion (THD+N): <0.002%Dynamic Range: >100 dBConnectorsMicrophone Input: 3-pin female XLRMicrophone Output: 3-pin male XLRHeadphone Output: 3-conductor ¼-inch jackRemote Control Inputs: 3-conductor 3.5 mm jackEthernet: Neutrik etherCON RJ45USB: type A receptacle (located inside Model 204's enclosure and used only for updating firmware)CompressorApplication: applies to Dante main and talkback transmitter (output) channelsThreshold: 1 dB above nominal level (-19 dBFS)Slope: 2:1Status LED: compressor activeSpecificationsModel: 204Weight: 3 lbs

LSTN-LS-44 72 Mhz Classic Level I Stationary RF System


LSTN-LS-44 72 Mhz Classic Level I Stationary RF System


$1974.7


72 Mhz Classic Level I Stationary RF System The Listen Classic Level I Stationary RF Systemygives you great performance at a great price. This system starts off with basic components such as a telescoping antenna and LR-300 Digital Receivers with earphones. The included neck loops and signage ensures the system meets the minimum legislative requirements for veunes with a capacity up to 100. Use this system for auditory assistance, in-ear cueing, visual descriptions, board meetings, and training meetings. Great for outdoor events, corporations, and theaters. Obtainable only in 72 MHz.Important FAQ's What is the difference between the LR-300 and the LR-400 receiver The LR-400 is more "user friendly" because it has the LCD Display, which will show the channel selection, battery life and signal strength. The LR-400 also has an adjustable squelch setting. Does this receiver sound as good as your other receivers, which are more expensive Yes, all Listen receivers have the same superior audio quality (20 dB less hiss than any other competitor). How many receivers can I have in a system As many as you need, the number is endless. What is the function of SQ To reduce noise of our systems, Listen now offers a noise reduction technology called ListenSQ. Both the transmitter and receiver must have SQ on to achieve the desired results. If you are planning to use this product with older Listen systems or equipment not manufactured by Listen, you should disable SQ. What is squelching The purpose of squelch is to mute the audio output of your receiver when the signal from the transmitter is turned off or is too weak to be received. Without squelch you would hear radio noise in your earphone. The squelch function is preset and cannot be changed on the LR-300. How do I lock the SEEK function Holding SEEK for longer than 4 seconds will lock the receiver on the current channel. When SEEK has been locked, the SEEK function is no longer useable until the same process is achieved to unlock the unit. The LED on the top of the device will blink if the unit is locked and requested to SEEK another channel. Misuse, dropping, or any other noticeable cosmetic damage&#59; Charging alkaline batteries instead of NiMH&#59; Overheating the charging process by closing the lid on the charging case. Can I purchase additional LR-300-072 receivers for my LS-44-072 system Yes Order as many as needed. The additional receivers will need an earphone (LA-164) or any other Listen earphones and batteries before being used. Is there a limit to the number of transmitters I can use in one room Yes. The 72 MHz LT-800-072 has a maximum of six. FeaturesEnsures public venues deliver an enriched listening experience while meeting new legislative requirements for assistive listeningSuperior audio quality - 80 dB signal-to-noise ratio (SNR), setting the industry’s sound quality standardOffers 17 wide band 100% digital channelsListen receivers are digitally-tuned so the transmission won’t driftMisuse, dropping, or any other noticeable cosmetic damageLevel II and Level III Classic systems offer optimum range of up to 1, 500 ft.SpecificationsWeight: 10 lbs

LR-500-072 Portable Programmable Display RF Receiver 72 MHz


LR-500-072 Portable Programmable Display RF Receiver 72 MHz


$375.82


One of Listen's most sophisticated receivers, the LR-500 Programmable Display Receiver offers the signature Look & Listen LCD Display that shows programming status, channel, lock, battery level, and RF signal strength. Channel selector buttons are easily accessible on the front of the unit. It has channel SEEK capability and is compatible with mono or stereo headsets. It takes AA batteries (alkaline or NiMH rechargeable). SmartCharge capabilities prevent overcharging. It's easy to use, easy to program.Features72 MHz.Superior Audio Quality 80 dB signal-to-noise ratio, setting the industry’s sound quality standard.A choice between 57 channels, complete antenna and accessory options make Listen products ideal for a wide range of applications.Programmability Unneeded channels can be locked so this receiver will access only one or more channels of your choice.100 % Digital Listen receivers are digitally-tuned so transmission won’t drift&#59;assurance that when you select a channel, it stays on the channel.Uses standard alkaline or NiMH batteries.Built in SmartCharge™ won’t allow batteries to overcharge. Charging circuitry is conveniently built into Listen’s receivers&#59; never worry about unplugging a transformer at a certain time.Transformer charging plug or for the ultimate convenience drop in charging contacts.IncludesLR-500 Portable Programmable Display RF Receiver.Quick Reference Card.SpecificationsControlsUser Controls – Channel up/down, SEEK, volume.Set-up Controls (battery compartment) – Alkaline/NiMH batteries, SQ enable/disable.Programming – Channel lock, squelch, channel lockout.IndicatorsLED – Red, illuminated when unit is on. Flashes when batteries are low, or to indicate charging. Flashes when locked and SEEK is pushed.Display – Channel Designation, lock status, signal strength indication, programming.PowerBattery Type – Two AA batteries, alkaline or NiMH.Battery Life (Listen batteries) – 30 hours alkaline (LA-361), 15 hours NiMH rechargeable (LA-362).Battery Charging (NIMH only) – Fully automatic, 13 hours.RoHS, WEEE, UL, PSE, CE, CUL, TUV, CB compliant.PhysicalColor – Dark Grey with white silk screening.

Hvac Blower Motor Resistor Standard Ru-212 - All


Hvac Blower Motor Resistor Standard Ru-212 – All


$50.89


Motor Resistor Standard is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product A premier manufacturer serving the automotive aftermarket since 1919, we deliver the highest quality and best coverage to meet your ignition needs Heavy molded ceramic body for maximum heat dissipation Nichrome wire winding for robust durability and extended life

LR-LT700-072 72 MHz Portable Display RF Transmitter


LR-LT700-072 72 MHz Portable Display RF Transmitter


$752.34


The Listen LT-700 Portable Display RF Transmitter is used to wirelessly broadcast audio for a variety of portable applications. Whether its voice or music, you can broadcast your audio to everyone in the audience without having to carry a microphone or be plugged into a wall. The LT-700 is excellent for factory tours, outdoor events, wireless microphone applications, classrooms, training, or personal use - anywhere you need to amplify sound, but don't have an installed system. With the many features of the LT-700, portable transmission has never been easier for users! FeaturesPortable Display RF TransmitterSuperior Audio Quality - 80 dB signal-to-noise ratio, setting the industry's sound quality standardA choice between 57 channels, complete antenna and accessory make Listen products ideal for a wide range of applicationsLook & ListenT LCD shows channel, battery status, and programming information100 % Digital - Listen receivers are digitally-tuned so transmission won't driftAssurance that when you select a channel, it stays on the channelTransmit up to six (6) channels simultaneously on 72 MHz, (3) three on 216 MHzUses standard alkaline or NiMH batteriesTransformer charging plug or drop in charging contactsBuilt in SmartChargeT won't allow batteries to overchargeCharging circuitry is conveniently built into Listen's LT-700 Transmitter never worry about unplugging a transformer at a certain timeSpecificationsRF Frequency Range: 72.025 - 75.950 MHzNumber of Channels: 17 wide band, 40 narrow bandNumber of Simultaneous Transmitters: 6Frequency Accuracy: ± .005% stability 32 to 122 (0 to 50C)Transmitter Stability: 50 PPMTransmission Range: From 0 to 150 ft.Output Power: Less than 10mW (72 MHz)Compliance: FCC Part 15, Industry CanadaSystem Frequency Response: 50 Hz - 15 kHz (±3dB) 72 MHz,System Signal to Noise Ratio: SQ Enabled: 80dB&#59; SQ disabled 60dBSystem Distortion: <2% total harmonic distortion (THD) at 80% deviationMicrophone Power: 3V DC BiasWeight: 1 lbs

LSTN-LR-4200-216 Intelligent DSP RF Receiver - 216 MHz


LSTN-LR-4200-216 Intelligent DSP RF Receiver – 216 MHz


$229.8


The LR-4200-216 receiver from Listen Technologies suggestion outstanding audio clarity and quality with the best range and reception obtainable for the 216 MHz band. The LR-4200-216 is the smallest device of its kind, resulting in a compact unit that won't burden the end user. Part of our Intelligent Digital Signal Processing (iDSP) line, is features an integrated neck loop/lanyard that is easy to wear, and the DSP loop driver suggestion an improved listening experience for anyone with a T-coil-equipped hearing aid. Dual 3.5mm output jacks also allow receivers to be shared between users. Each receiver is also equipped with a micro USB connection, making it easy for venues to charge and update the units with free iDSP software via any standard USB port. Extended speaking sessions, presentations and more can be challenging for other devices, but the LR-4200-216 incorporates advanced Lithium-ion rechargeable batteries that suggestion long life and reliable power. Charge status, along with channel information and volume level, are easy to read on the integrated OLED display. From lecture halls to conferences, classrooms and more, the LR-4200-216 is an outstanding receiver best for any venue looking to suggestion convenient, reliable assistive listening. FeaturesIntelligent DSP RF Receiver - 216 MHzHigh performance RF receiver suggestion best-in-class sensitivity and 20dB less noise than other devicesIntegrated neck loop/lanyard with DSP loop driver for an enhanced T-coil listening experienceSmallest device of its kind makes it easier to wear and use and for venues to dispense, store and maintainOLED display showing channels, battery status, channel status, volume level, and moreLimited lifetime warranty with hassle-free supportLanyard and belt clip options suggestion convenient and discreet bests for the end userAdvanced rechargeable battery technology eliminates the costs and hassles associated with frequent battery replacementDesigned for single-channel applicationsOutput/s: Two 3.5 mm connectors, unbalanced, 0 dBu nominal output level, 16 mW maximum, impedance 32 ohmSystem Frequency Response: 50 Hz - 15 kHzUser Controls: Power, up/down volumeProgramming: Via software and USB portLEDs: White, illuminated when unit is on, flashes when batteries are low or to indicate charging, solid when fully chargedFrequency Range: 216.0125 - 216.9875 MHzNumber of Channels: 19 wide band, 38 narrow bandSensitivity .6uV typical, 1 uV maximum for 12 dB sinadFrequency Accuracy ± .005% stability 32 to 122Squelch Programmable in 20 steps, automatic on loss of RF signalPower Supply Micro USB connector, 5 V, 500 mABattery Type Lithium-ionBattery Life 8 Hours of continuous useColor Dark GreyDimensions 3.75 x 2.0 x 0.64 inTemperature - Operation 14 to 104Temperature - Storage 4 to 122Relative Humidity 0 to 95% relative humidity, non-condensing

Greatest Hits, Vol. 1


Greatest Hits, Vol. 1


$11.98


Find Greatest Hits, Vol. 1 by Rascal Flatts in CD.

Melt


Melt


$7.98


Find Melt by Rascal Flatts in CD.

Fortuneteller's Melody


Fortuneteller’s Melody


$1.99


SHeDAISY ~ Fortuneteller’s Melody

Rascal Flatts


Rascal Flatts


$4.99


Rascal Flatts ~ Rascal Flatts

Rascal Flatts: Live [DVD/CD]


Rascal Flatts: Live [DVD/CD]


$3.99


Rascal Flatts: Live [DVD/CD]

Greatest Hits, Vol. 1 [Jewel Case]


Greatest Hits, Vol. 1 [Jewel Case]


$7.99


Rascal Flatts ~ Greatest Hits, Vol. 1 [Jewel Case]
Advertisement

Comments are closed.